Question about Philips Magnavox MWR10D6 DVD Recorder

1 Answer

Recording Snow Hi. I just bought this DVD recorder to convert my old jvc 600x camcorder vhs tapes to DVD. I followed all of the directions in the manual and the only thing that gets recorded is snow. I have tried going directly from the camcorder and I've also tried going through the adapter video tape that is on vhs. I've looked for an output switch on my camcorder and vhs and there doesn't seem to be one. What could I be missing?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers
Re: Recording Snow

If you hook your VCR up to the RCA jacks on the front of the DVD recorder, push 002 on the remote to use the front input jacks. (001 if you hook your VCR up to the rear input jacks)

Push record on the DVD recorder, and push Play on the VCR.
(Pg. 35 in the manual)

When you push play on the VCR, you should be able to see the movie being played on your TV. If you cannot, make sure your RCA cables are good and hooked up correctly.

That's all you have to do, so if it's not recording I would try to take the unit back for an exchange.

Posted on Jan 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

Want to record VHS to DVD on my Toshiba DVR620KU but do not want to connect to my TV set. Is this possible? My TV is older and does not have the input/output jacks. I just want to put in a VHS tape and a...

If the entire VHS is full then you can easily transfer the VHS contents to the DVD. The video will play while it is recording onto the DVD, but you don't have to have it hooked up to any TV for it to record. Now if you don't know how long the VHS content is that you want to record to DVD, then you will have to hook up the player to a TV so that you can press stop when you reach the end of the content you want recorded. At least this is true in the way that I use to transfer VHS to DVD:

1) Turn on the unit
2) Insert VHS tape
3) Insert DVD-+R or DVD-+ RW
4) Using remote, press VCR
5)Using remote, press play then pause the tape where you want to start recording.
6)Using remote, press DVD
7) Using the remote, press DUBBING. The VHS should start to play and the DVD should start recording

When using this method, don't hit the RECORD button!

I hope this helps!

Sep 05, 2011 | Toshiba DVR620 DVD Recorder/VCR

2 Answers

Using a JVC /DVD/S-vhs dual dubbing Deck model jvc sr-mv55u Trying to do a straight dub from an edited S-VHS tape to a formated for video DVD for archival library. I am following the instructions in the...

now days dvd player comes with advace tacnoloy
u not need make vedio dvd u make to your dvd as a data dvd & dvd plyer read it isely so dont need to do vhs or vcd

Mar 29, 2008 | DVD & Blu-Ray Players

2 Answers

Magnavox ZV450MW8A DVD/VCR Recorder Dubbing.

I bought a ;magnavox dvd disc and cassette recorder combo.
I am having trouble with setup items? I get nothing on the screen to select from?

Oct 24, 2009 | DVD & Blu-Ray Players

1 Answer



Sep 30, 2009 | Dual Presidian DVD Recorder

1 Answer

RCA 8295n dvd-vcr combo starts recording from VHS tape to disk and then stops.

Is the VHS tape a store bought movie or show?

MacroVision and other copy protection systems are put into store bought tapes and discs of movies and shows, and are read by your recording equipment. Once it reads this, it stops recording.

Does the screen turn red before it stops? This is one of the indications that MacroVision is stopping you.

Aug 28, 2009 | RCA DRC8295 DVD Recorder/VCR Combo

2 Answers

I have a Magnavox ZV427MG9. I follow all directions in manual for dubbing VHS home movies to DVD but when I try to play the DVD back there's nothing on them.What am I doing wrong?

Depending on the procedure you may be pressing the record button instead of the D.Dubbing or Dubbing button. When recording from VHS to DVD you must first, load the blank DVD and VHS home movies, then play the VHS movies, then PAUSE the VHS movie when you want to START recording... then the only the you have to do is pressing the D.Dubbing button or the Dubbing button. If your VHS tapes starts to play after the Dubbing button is pressed you have been successful in Dubbing.

Aug 13, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

I just bought a Magnavox ZV450MW8A DVD/VCR Recorder. It has recording capabilities on both the DVD and VCR components but can you tell me if I can use it to record FROM the VCR directly onto the DVD? This...

Yes, you can, I have this unit and have actually copied a dvd to a vhs and then copied back to a dvd as I wanted a dvd copy to give a friend. The directions in the book are really quite simple. They tell you how to set the vhs to the spot where you want to start copying, etc.

I have not yet tried copying my family vhs tapes, but don't see a problem, just a big project. Good luck.

Jun 13, 2009 | Philips Magnavox DVD/VCR Dual Player

8 Answers

VHS to DVD dubbing


Please follow the troubleshooting steps found on page 105 of the user manual.

Additionally, be sure all cables are hooked up properly (page 12)

Thank you for using FixYa - a FixYa rating is appreciated!!

Feb 08, 2009 | Sony RDR-VX555

1 Answer

Recording purchased vhs tape to dvd recorder.

How old is the VHS tape? I've had success recording older movies, but the newer ones have encryption to prevent duplication of them. I've even tried playing them on another VCR and transmitting the signal with a wireless audio/video transmitter but unfortunately the encryption is still there. If you can copy the tape to another tape, then it may not have encryption. If that's the case, check you A/V inputs to see if you have them setup right.

Jun 12, 2008 | Aspire Digital AD-8091 DVD Recorder

1 Answer

Panasonic DMR-E55 Won't Let me Record my own VHS


This is probably caused by an irregular magnetic encoding pattern being generated by the tape itself. If the DVD recorder does not fully recognise the code, it may incorrectly interpret it as copy protected. If there is any tape flutter or there are tape edits, these can contribute to the problem. In addition to this magnetic imprinting can occur on old tapes that have been stored for a number of years without being spooled. basically wrong bits of the tape get magnetised. You can sometimes hear an echo on old tape recordings caused by imprinting.

You could try the following:

1) If available, try using a different video machine to play back and record from.

2) Whatever video machine you use, put your tape in, fully fast forward and rewind a couple of times, then try your recording again. This is particularly important if you haven't used the tape for some time.

3) If it fails again, check to see if it always fails at the same point.

4) If it does, try winding forward a little and then try to resume recording.

5) If you can record it means that a short section of tape is giving a spurious code to your dvd recorder and confusing it.

6) Use a re-recordable dvdrw to make a master. You won't keep wasting discs if the recording stops. You will also be able to produce another dvd from your master and edit it if your recording ends up in a number of segments.

7) Always use the highest quality setting possible when producing a master.

8) If all else fails, if you have a friend with another dvd recorder, maybe try that.

Have fun....

Jan 21, 2008 | Panasonic DMR-E55 DVD Recorder

Not finding what you are looking for?
Philips Magnavox MWR10D6 DVD Recorder Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips DVD & Blu-Ray Players Experts


Level 1 Expert

6 Answers

Cindy Wells

Level 3 Expert

4719 Answers

rugby prop

Level 3 Expert

426 Answers

Are you a Philips DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides