Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

GE Profile Harmony Electric Dryer - Starts out heating but then screen says SENSING

My GE Harmony Electric Dryer starts out working okay with heat, but when I go back later to check on the load the screen says SENSING and the clothes are still wet. The load will be alike items....such as all towels.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 878 Answers

Nicknames, usually with long dry times I suspect a pinched or clogged vent. Make sure you check that first. You can do a test to check the moisture sensor. The 2 sensor bars will be on the inside of the drum just below the vent cage. Press the home and then help button. Next press and hold the help and start/stop button for 3 seconds. On a dry sensor, you should see a voltage of approx 4.75 displaying. Now get a wet rag and hold them across the 2 sensor bars. You should see the voltage drop to about 1.0 volts. If it does this your sensor is ok. Check the vent and this out first and we will take it from there. Catriver.

Posted on Dec 03, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Ge Harmony Dryer sometimes will not spend. It heats up but will not spend at times.


Try manually start the dryer. Take a piece of tape and tape the switch on the door. Then take one hand turn the drum and press the start button at the same time. If is starts then then you have bad motor.

May 18, 2011 | GE Profile Harmony DPGT750EC Electric...

1 Answer

G.E. Profile Harmony Dryer heats then won't heat


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Oct 10, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Harmony DPGT750EC Electric Dryer not heating


inverter board may be bad. how long have you had the machine

May 07, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

My GE Profile Harmony Dryer is no longer Heating


Does it get hot when you turn it on, and then never gets hot again while its running? On my dryer the solenoid broke, when the dryer was cold it worked and the dryer operated properly because the dryer and solenoid were cold and the solenoid wire was closed, when the dryer was hot enough the solenoid opened and the heat would not restart. the solenoid is a coiled wire which is used to open the gas valve.

Dec 28, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Dryer. Sometimes fails to heat or just air dries.


Cold solder joints on blower motor coils. Needs re-soldered. I suggest finding a buddy who knows how to take the dryer apart and knows how to solder. Luckily for me, I know how to do all of that, I had the same problem you have.

Oct 19, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

DescrI have a GE profile harmony electric dryer model #dpgt750ec1pl. About 5 minutes into a drying cycle the blower shuts down. There is still heat but no air coming out of the dryer duct. Any suggestions?...


you should not have heat when motor stops there is a switch in the motor to shut the element off....yours is not working(you could burn your house)replace the motor.
PLEASE DO NOT TRY IT AGAIN...can't be lucky all the time

Aug 07, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Harmony Elec. Dryer Blower Stops working or won't start up


Do this.

press "Home"
press "Help"
press both "My Cycles" and "Back" at the same time and hold them until service mode pops up.
It will tell you what's wrong.

Jul 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Ge profile harmony electric dryer doesn't always heat.


Remove back of dryer and take out the elament shield and replace element don't over strech it start at one side and work it around thank you for useing fixya rate me

Jul 16, 2009 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Dave Harrison

Level 2 Expert

114 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

vince

Level 3 Expert

1216 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...