Question about Empire ECS HB06M HearthRite Heater

4 Answers

Pilot light will not stay on when egnition switched is released!

Vokera excell 80 boiler.

Pilot light will not stay on when egnition switched is released!

Pilot light keeps going off and at times will not stay on, hence gas will not egnite to start boiler!

Posted by on

  • Anonymous May 25, 2008

    pilot goes out when i release the button or heater will go on for a little bit with the pilot staying on high flame and then it goes out

  • Anonymous Mar 23, 2014

    When boiler starting it makes loud buzzing noise,ignites then turns itself off and on when running water

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just below where the pilot flame connects there is a nut that holds the flame in place remove and purchace a can of air..blow out so you have a blue flame.this happen to me every year once I blow out the dust or whatever is in there it has a nice blue flame which is the key indicator of how the heater operates...remember when you start to see an orange flame that should raise a flag that you need to clean out where the flame ignites and the gas goes through Good luck

Posted on Feb 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes this is my problem. Can you tell me how to fix it.

ALICELAND50@ROADRUNNER.COM

Posted on Jan 07, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My pilot light stays on but when I turn it up it will go out.

Posted on Sep 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

The little copper tube that sits in the pilot flame is faulty. this is called a flame sensor. replace this and you should have no problems

Posted on Dec 09, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got vokera excell 80 sp boiler ,after above tamprature 70 its turn off then i have to turn off after 20min i turn on then it work but again after som e time it cut off pls help


It could be the boiler is overheating and has to cool down before it can come back on. Look at the pump and make sure it is on speed 3, also drain some water and make sure it isnt dirty if it is you could have a blocked system that requires powerflushing.

Dec 13, 2014 | Water Heaters

1 Answer

Vokera boiler problems


need to change thermostat and a thermocouple

Jan 28, 2014 | Water Heaters

1 Answer

Boiler pilot light won't stay lit


Power can be on just turn the room thermostat down .

Apr 06, 2017 | Burnham IN5S-SP-EZ-NG IN5, 86,000 BTU...

1 Answer

Could please tell me how to light the pilot on my vokera boiler please


Hi and welcome to FixYa, I am Kelly

Since you did not include your model number, I am not going to guess which boiler you have. (Not being rude there are just too many.)

Every model of Volkera Boiler is listed in the link below. Please click or copy and paste this link:
http://www.vokera.co.uk/trade-professionals/manuals-literature
Once the page opens, find your model number and click on "download" to get the manual. The lighting instuctions are in the manual.

Thanks for choosing FixYa,
Kelly

Apr 05, 2011 | Heating & Cooling

1 Answer

Im calling for heat from the thermastat and control panel, the boiler light and and the fan is running, but no matter how many times i keep re trying the pilot and burner will not commence, is there...


I would check to make sure control on gas valve is in on position and pilot is lit if you have a standing pilot. If you have a spark or hot surface ignitor make sure they are trying to lit pilot. If you have standing pilot model and pilot lit is not on. Turn control on gas valve to off,wait five mins. then turn to pilot. Depress botton and try to light pilot. If it lights hold down for a couple of mins. then release.. If pilot stays lit turn control to on. If thermostat is calling for heat this should bring main burner on. If pilot does not stay lit then replace thermocouple. Hope this helps. Thanks

Nov 16, 2010 | Heating & Cooling

3 Answers

MY VOKERA BOILER IS NOT WORKING I HAVE NO HOT WATER AND NO HEATING


try check in the water pressure on the boiler should be on 1.5 bar

Jun 01, 2010 | Heating & Cooling

2 Answers

Problem with hot water from Vokera Excell 80sp boiler


Hi - hope someone can help. I have a VOKERA EXCEL 80SP combi boiler and been without hot water/central heating for two days. The pilot light is on, the fan is on, but boiler not triggering once the hot water tap is turned on.
Hopefully someone come to look at it today but hoping for some advice. Anyone else had this problem?
Thank you.

Dec 21, 2009 | Water Heaters

1 Answer

The pilot light on my vokera mynute 14-48-SE has gone out how do i relight it?


turn honeywell gas control clockwise and push in then spark egniter hold for 20secs then ease off button slowly pilot sound remain alight

Oct 08, 2009 | Water Heaters

1 Answer

I have a vokera unica 28 which pulses when firing


your fan may need attension fan runs after boiler shuts down is normal on some Vokera,s too clear fumes out the flue 2mins approx

Oct 04, 2009 | Water Heaters

1 Answer

I have a vokera 20-80 flowmatic boiler the pilot light works and the fan works but the boiler will not fire up my corgi heating engineer cannot fix the problem and has walked out on me after 3 weeks of...


hello it may be a faulty flame safety device that touches the pilot flame or it could be you need a new control board and also check the flue isnt blocked hope this helps

Dec 03, 2008 | Heating & Cooling

Not finding what you are looking for?
Empire ECS HB06M HearthRite Heater Logo

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Empire Heating & Cooling Experts

Paul Carew

Level 3 Expert

3328 Answers

vance jones

Level 2 Expert

120 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Empire Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...