Question about Sharp XR-10X Multimedia Projector

1 Answer

How do i connect my projecter with my pc - Sharp XR-10X Multimedia Projector

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers
Re: How do i connect my projecter with my pc


Your Sharp XR-10X will only allow video inputs through the:
1. RGB/ component input (15-pin HD)
2. composite video input (RCA phono color yellow)
2. S-Video input ( 4 pin mini-DIN )

Depending on the output(s) available from your PC, you can use any of the following:
a. the yellow RCA female
b. S-Video output (4 pin mini-DIN )
c. VGA (which normally goes to the monitor) but would require a VGA/HD to HDMI Format Converter such as the one here

Should this be not enough information, please post back with what PC brand/model that you have. Additionally please specify what Video Card are you using if your PC is a desktop.

Good luck and kind regards.

Posted on Dec 03, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My sharp PG 10s Notevision comes on. However, is not projecting my computer images on the screen

Make sure the connection from the pc to the projector is secure, also make sure the display settings on the computer are set to extend the desktop onto the projector, and that the projector is set to pc mode.

May 12, 2011 | Sharp Notevision PG-B10S Multimedia...

1 Answer

I use OPTOMA ex 532 with windows 7 32 os the projector working properly but in pc screen not displayed the projection screen

You have three option to view projection screen on your PC SCREEN:
1. Use "Y" cable to connect the projector and pc screen at a time.
2. Use "Video Splitter" to connect projector and pc screen at a time.
3. you can use a VGA cable to connect your pc screen with your projector VGA OUTPUT. here I show you the pictures.good_help_4.jpggood_help_5.jpggood_help_6.jpg

Jan 20, 2011 | Multimedia Projectors

1 Answer

How do I connect the Sony LCD VPL-CX63 projector to my desktop computer (not a laptop)? We can not get the image from the computer screen to project.

You probably have to lower the resolution on your PC before you connect the projector. The frequense also can´t be to hight. Start with 800*600 at first then on increase if it works.

Dec 09, 2010 | Sony VPL-CX63 LCD Projector

1 Answer

Computer running vista- no picture being projected

try another computer and see if the vga input is OK.
If it is then set the vista screen resolaution to 640x480 and connect a spare computer monitor on the pc vga out and check that the video is coming out the pc.

May 12, 2010 | Panasonic PT-LB20U Multimedia Projector

1 Answer

IXD 420U projector takes a long time to project and has pink ima

If possible, try to replace the VGA cable between the projector and the computer. A bent or broken pin, or a damaged wire, can prevent the blue or green (or both) portions of the picture from being displayed. The result is a reddish/pinkish picture.

As for the long time to project an image, this could be an extended warm-up time. How old is the bulb in the projector? Does the projector have an option to display the hours used and/or remaining on the bulb? Bulbs do have a finite life, and when they near the end of their service life, they can become more difficult to start.

Hope this helps!

Feb 22, 2010 | Multimedia Projectors

1 Answer

Pc connected vp6121 DLP projector shows only blue images


Feb 12, 2009 | HP Digital Projector Vp6110 Multimedia...

1 Answer

Black and white projection

Hi there

First try another cable from the PC to the Projector.

The VGA / RGB Cable used from your PC to the Projector has a couple of very thin copper wires on the inside and they easily get damaged.

If this doesn't help then you should try another PC.

If that works then you'll know that it is the PC's card that is faulty.

If it doesn't work you'll have to get the Mainboard repaired or replaced , because the inputs on the Projector lies within the Mainboard.

Must warn you that a Mainboard replacement is a bit on the expensive side.

Mar 26, 2008 | Eiki LC-SB20 Projector Multimedia...

1 Answer

Large white vertical bar thru picture during projection

Two reset attempts to factory settings seems to have been the fix.

Feb 01, 2008 | Toshiba TDP-S8 Multimedia Projector

1 Answer

Projecting Movie files

That is not supported to ur projector.


Nov 22, 2007 | Hitachi CP-X275 Multimedia Projector

1 Answer

Flickering projection

Try changing the refresh rate on the pc video.

Nov 10, 2007 | Toshiba TDP-S8 Multimedia Projector

Not finding what you are looking for?
Sharp XR-10X Multimedia Projector Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Multimedia Projectors Experts


Level 3 Expert

2236 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers


Level 1 Expert

8 Answers

Are you a Sharp Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides