Question about Intel Motherboard

2 Answers

Runtime error 32 at 0040475d on my pc on boot finish

Can someone please help me in removing the runtime error 32 at 0040475d on my pc which has win xp 1.8 G Hz processor 256 ram 20 gb hard disk.Everytime i start my computer iget this error notification twice.All i do is click both of them ok and it disappears.But what is irritating it appears whenever i start my pc.How can I get rid of this permanently.Thank you very much in anticipation.

Posted by on

  • 12 more comments 
  • Anonymous Dec 14, 2007

    I can not run intel 945 mother board CD, Gives run time error message

  • shavsha Dec 17, 2007

    Runtime error 32 at 0040475D on my pc on boot finish and after each and every operation of the PC.



    Pl offer me the solution to rectify the same. My system Microsoft XP professional v 2002.

  • Anonymous Dec 21, 2007

    runtime error 32 at 0040475d pops up all the time i start my pc. i tried recovery to clean up the system but it keeps coming. what do i do to solve this.

  • Anonymous Dec 21, 2007

    sad

  • 6613 Dec 25, 2007

    runtime error 32 at 0040475d

  • Anonymous Dec 26, 2007

    Yes i too have the same problem. How do i view the solutions offered by the experts. I had a look around on the site but could not find any pointers.

  • Anonymous Dec 26, 2007

    I have the same problem. How can i view the solution offered by the experts?

  • Anonymous Dec 28, 2007

    runtime errr 32 at 0040475d

  • Anonymous Dec 28, 2007

    i will be getting this error when ever i start my pc

  • Anonymous Jan 04, 2008

    Pls help me! The problem comes when I start any file!

  • 6613 Jan 10, 2008

    runtime error 32 at 0040475d

  • Anonymous Feb 17, 2009

    I have always have Runtime error 32 at 00408a01.

  • Anonymous Mar 12, 2009

    yes

  • Anonymous Mar 25, 2009

    runtime error 32 at 0040475d

×

Ad

2 Answers

N1197882188k

Posted on Dec 17, 2007

Ad

Mother board (P)4 plz driver downlod

Posted on Dec 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I turned on the PC, was asked to choose between WIN and WIN XP. When I choose WIN XP, the message comes up that "file nvrd32.sys could not be found" and so then I had to reboot the PC, choose WIN...


need the xp disc someone or thing has deleted a system-32, made the same mistake and had to reload the OS. System 32 is a main part of Your OS with just one little whoops of deletion you render the program useless. it should save your old stuff in a win.old file which it'll explain as you redo the whole thing over again good luck hope I can help

Jan 20, 2011 | Computers & Internet

1 Answer

Runtime error


Method 1: Clean Boot with Only MoSearch loadTOCNode(2, 'resolution'); The Mosearch.exe (Microsoft Office Search Service) and Mosdmn.exe (Microsoft Office 10 Search Filter Daemon) Startup items may be conflicting with some other program (or programs) running in the background. Therefore, clean boot your computer with only MoSearch selected on the Startup menu to determine whether this program is the source of the conflict. To do this, follow these steps:
  1. Click Start, and then click Run.
  2. In the Open box, type msconfig.exe, and then click OK.
  3. On the General tab, click Selective startup.
  4. On the Startup tab, click to clear all check boxes except for MoSearch.

    NOTE: In Microsoft Windows Millennium Edition (Me), leave the *StateMgr check box selected as well.
  5. Click OK, and then click Yes when you are prompted to restart the computer.
  6. If the error message can be reproduced, repeat the preceding steps. In step 3, also click to clear the Process System.ini file and Process Win.ini file check boxes.
If the error message cannot be reproduced, this indicates that MoSearch is conflicting with some other program or programs running in the background. Follow these steps to locate the conflicting program:
  1. Click Start, and then click Run.
  2. In the Open box, type msconfig.exe, and then click OK.
  3. On the Startup tab, click to select one of the check boxes.
  4. Click OK, and then click Yes when you are prompted to restart the computer.
  5. If the preceding steps reproduce the error message, the last item added to the Startup menu is causing the conflict. If the error message is not reproduced, repeat these steps until all Startup menu check boxes are selected.
  6. If all the Startup menu check boxes are selected and the error message is still not reproduced, start Msconfig again, and then click to select the Process System.ini file and Process Win.ini file check boxes.
If these steps don't help you find and eliminate the conflict, proceed to the following method. uparrow.gifBack to the top Method 2: Uninstall the "Support for Fast Searching" Feature loadTOCNode(2, 'resolution'); To uninstall the "Support for fast searching" feature from all Office XP products that are installed on your computer, follow these steps.

Note This applies only to computers that are running Microsoft Windows 98 or Microsoft Windows Millennium Edition.
  1. Quit all Office programs.
  2. Click Start, point to Settings, and then click Control Panel.
  3. Double-click Add/Remove Programs.NOTE: Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

  4. On the Install/Uninstall tab, click Microsoft Office XP product, where Office XP product is the name of the specific Office product in question. If you are using a stand-alone version of one of the Office programs, click the appropriate product in the list.
  5. Click Add/Remove.
  6. In the Maintenance Mode Options dialog box, click Add or Remove Features, and then click Next.
  7. Click the plus sign (+) next to Office Tools, point to the icon next to Support for fast searching, and then click Not Available.
  8. Click Update.
  9. Repeat steps 2 through 8 for all other Office XP products installed on your computer.
  10. Restart your computer.

Apr 18, 2010 | Microsoft Windows Vista Home Premium with...

1 Answer

Desktop runtime error


You need to call the maker of your computer. There is something wrong with the Motherboard of your computer or the hard drive. Call the maker of your computer this would be HP, Acer, Dell, Gateway, or any other maker. Their tech support team will help you. If you have HP go to www.hp.com and speak with a live agent, it helps to avoid a 50 dollar diagnostic fee.

Apr 05, 2009 | Microsoft Windows XP Home Edition

1 Answer

Runtime Error


Try booting the computer in Safemode ( Restart the computer and press F8 just before Windows start loading). Then go to Start>All Programs>Accessories>System Tools>System Restore. See if you can restore your system to a period when you did not have this problem. That is if you started having this problem very recently. Hope this helps.

Jan 10, 2009 | HP Compaq Evo D310v PC Desktop

1 Answer

Runtime Error! I can't use IE?


If you have IE7, click on START, SETTINGS, CONTROL PANEL, ADD REMOVE PROGRAMS. Remove Windows Internet Explorer 7, reboot.

If you have IE6, click on START, SETTINGS, CONTROL PANEL, ADD REMOVE PROGRAMS, ADD REMOVE WINDOWS COMPONENTS, and uninstall IE (Internet Explorer). Reboot. Go back and reinstall IE. You may need the original XP CD. Borrow one from a friend if you can.


Jul 23, 2008 | Computers & Internet

2 Answers

Missing Operating System error


your bought compag computer is a new one , because that error is appears only if the hard drive or the harddisk is defective or damage. Your installation of windows xp is finished totally because sometimes the error is appears because the system installation is not finished and the os system cannot read. try to re install again the windows and delete the old partitions and create again if the problem is the same even there is no error in the installation until it's finished i say that the problem is in the harddisk. Maybe the harddisk develop a bad sector in the master boot record of the hardrive

Apr 15, 2008 | Compaq Presario 700 470024-192 Notebook

2 Answers

BOOTING


are you useing the 98 disk to boot to xp. Thats hat it sounds like

I’m happy to assist further over the phone at https://www.6ya.com/expert/james_1cb31da1bc8c6102

Jan 03, 2008 | Computers & Internet

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

1,199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

David
David

Level 3 Expert

781 Answers

Computer Links

Level 3 Expert

2386 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...