Question about Dell 924 All-in-One InkJet Printer
CAN'T PRINT KEEPS SAYING PRINTER BUSY
You might need to simply reset it. See this article for help. Also see this article. And your home support page here.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!
Posted on Aug 10, 2009
The cover on the right side will slide to the rear. Take it off. You will see a metal door. Power is off at this time!
Grab the door at the left and pull it open. You'll see a memory DIMM. Pull the little silver clips on either side of the DIMM out. The Dimm should release. Take it out. Power up the printer. If you don't get the error, power off. Reinsert DIMM. Power on. If no error, you've fixed it. If error comes back, you need a new DIMM. You should be able to print with out the memory, only slower.
Posted on Feb 09, 2010
Tips for a great answer:
Jul 06, 2015 | Printers & Copiers
A quick fix for most communication errors can be achieved by
resetting the printer and/or rebooting the PC. Simply disconnect the printer
from your computer (if USB connected)> reboot your pc > unplug and
re-plug the printer into the power source to reset it. When the printer turns
on, reconnect it to your computer (if USB connected). Then try to print again
once the computer fully recognizes the USB connection or when the WiFi light on
the printer turns solid green (if WiFi connected.).
If that doesn't help, try the steps below:
Feb 10, 2012 | Lexmark X4580 InkJet Printer
Feb 14, 2010 | Printers & Copiers
Aug 10, 2009 | HP PSC 2175 All-In-One InkJet Printer
Feb 09, 2009 | Canon PIXMA iP1600 Printer
Aug 28, 2008 | Dell 942 All-In-One InkJet Printer
Jan 18, 2008 | HP PSC 2210 All-In-One InkJet Printer
1,434 people viewed this question
Usually answered in minutes!