Question about E-Machines eMachines Desktop PC

2 Answers

Wont restart i have a 2000 model year emachine 667 ir that was my moms...when i got it home from arizona it wont start back up....it comes on when i plug it in but shows nothing on the monitor and just sits there and runs...there are pictures and info i would like to get off of it that was my moms

Posted by on

  • JAY-JAY-JAY Dec 07, 2007

    PRODUCT WAS NOT USED FOR A MONTH OR MORE AND NOW THE GREEN LIGHT WILL GO ON AND THE DVD AND CD DRIVE DOORS OPEN AND CLOSE BUT NOTHING HAPPENS---NOTHING ON SCREEN THOUGH MONITOR ON LIGHT GOES ON. IF IT WASN'T ACTIVATED ON TIME, WOULDN''T THAT MESSAGE AT LEAST APPEAR ON SCREEN? I'VE TRIED TURNING IT ON AND OFF AND EVEN UNPLUGGING IT BUT NOTHING CHANGED.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 324 Answers

Bob,
Since this unit was involved in being moved, the first thing that I would suggest is that you take the covers off and reseat everything. Cards, cables, memory modules, etc.
Often, when these systems are moved, things will get jiggled slightly out of place and simply reseating will resolve the issue,

If you need any additional information, please feel free to ask. If this information has assisted you in the resolution of you problem, please return here to give my assistance an appropriate final rating. If this information has answered your question and/or lead to a resolution, please rate it as "Fixya!".
Thank you, and have a super day!
Ron-

Posted on Dec 02, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

First thing to do is make sure you have power off, open it and make sure all the cards are seated correctly in the slots

Posted on Dec 02, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does Arizona have a grace period for renewal of expired driver's license?


None mentioned

Arizona Drivers License Renewal Guide ' DMV.org

https://www.dmv.org/az-arizona/renew-license.php
Before your driver's license expires in Arizona, you need to renew it with the Department of Transportation (DOT) Motor Vehicle Division (MVD) in order to ... During this time you will not need to renew your license; however, you will need to visit an AZ DMV office every 12 years to update your photo and take a vision exam.

Renew Your MVD Car Registration in Arizona ' DMV.org

https://www.dmv.org/az-arizona/registration-renewal.php The MVD does not offer a grace period. ... If your vehicle fails a smog check before your registration expires, the MVD will grant you an extra 30 days past your renewal date to get the car repaired, pass an emissions test, and ... If you allow your coverage to lapse, the MVD may revoke your registration and/or driver's license.

Arizona Drivers License Does Expire ' Traffic School Online

https://www.myimprov.com > Blog > Arizona Driver's License Does Expire Rating: 4.8 - ‎69,498 reviews
ARIZONA: Licenses expire on the 65th birthday, and until then drivers only need new photos every 12 years - making Arizona unique in how long a license can last. Starting at 65, drivers must renew every five years, with a vision test each time. ... Each state has its own rules on driver license expiration and renewal.

Renew Your Arizona Drivers License ' DMV.com ' DMV.com

https://www.dmv.com/az/arizona/drivers-license-renewal Drivers who have started an AZ drivers license renewal process will be issued a temporary permit. This permit has a validity period that lasts for 30 days until you receive your permanent driver's license. When renewing drivers licenses at the DMV office, you will be asked to provide a mailing address to send your new ... Does Arizona have grace period for renewal of expired driver license...

Dec 19, 2017 | Computers & Internet

1 Answer

Ok my moms car started sputtering and the rpms only went to 2000 rpms and not the car wont start what is the problem


Can not tell you by guessing

Vehicle have to be tested to find problems

You provided no vehicle,year,make,model or
any info or test results

Nov 10, 2014 | Cars & Trucks

1 Answer

Emachine in boot manager wont recognise hdd and when starting laptop is i a loop of restarting says it cant complete windows installation and the disks didnt come with plz can you help me


It sounds like you are trying to do an upgrade to Windows 7, as normally the operating system comes pre-installed on the Hard Drive (HDD). If the hard drive is not recognised, then it is a hardware fault, take it back it where you bought it!

If that is not possible, check that it is correctly fitted to the hard drive socket, otherwise it is back to a repairer.

Sep 14, 2014 | eMachines Computers & Internet

1 Answer

My emachine laptop wont work i turn it on and it comes up with a blue screen then truns off now it only turn on to a black screen and a mouse pointer is there any way to just reset it to what it was when i...


try rebooting the computer and as soon as it turns on tap on the "F8" key until a new boot menu appears, choose "safe mode" if the computer starts successfully in safe mode. restart it and allow to boot normally. If this fails comment back as to whether it started in safe mode or not and I will attempt to help you further,

Mar 02, 2013 | eMachines Computers & Internet

1 Answer

When i turn on my PC toys CPU and emachines monitor it says disk boot failure enter system disk


hi,

you have two option as follows:
1.when you start PC press F2 enter in BIOS set it to boot from HDD then restart,if this step does not help then number 2
2.reinstal the OS

Sep 26, 2012 | E-Machines eMachines Desktop PC

1 Answer

Dish network remote control codes


Hi, my name is Cheri Torres and I work on the Social Media Team at DISH. I would be happy to help you get your DISH remote addressed to your Samsung TV. There are many different codes for each of our different models of remotes. The model number of your remote will be located on the back of the remote at the top, usually a two to three digit number. I will list here for you the best codes for each of our different models of remotes and also the instructions for addressing the remote to the TV. I hope you find this information useful and if you have any further questions or concerns feel free to email me directly at Cheri.Torres@Dish.com.

remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 680, 738, 516, 655, 667, 833, 897, 500.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 738, 516, 680, 522, 664, 833, 755.
4.0 and 4.4 IR/UHF remotes - codes 738, 516, 680, 667, 833, 858, 897.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 738, 680, 516, 505, 755, 833.
20.0, 20.1 IR and 21.0 21.1 IR/UHF remotes - codes 680, 738, 601, 833, 516, 794, 858, 684.

Instructions
1. Press and hold down the TV button until all the lights light up on the remote.
2. Enter the 3 digit code for you TV.
3. Press the pound(#) button once.
4. Test the functionality of your TV.

Apr 16, 2012 | Samsung LN40D550 LCD TV

1 Answer

TV EMERSON COD DISH NETWORK REMOTE


Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. We have a few different codes for each of our different models of remotes. You should be able to locate the model of your remote on the back of the DISH remote at the top, usually a two to three digit number with a decimal point. I will list here for you the best codes for our more popular models of remotes and the instructions for addressing your Emerson TV to the remote. I hope you find this information useful and if you have any further questions please let me know.
Remote models Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 569, 632, 505, 516, 669, 627.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 632, 667, 666, 233, 660, 733, 846.
4.0 and 4.4 IR/UHF remotes - codes 733, 632, 656, 569, 846, 516, 627.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 733, 632, 569, 738, 764, 506, 516.
20.0 IR and 21.0 IR/UHF remotes - codes 672, 632, 654, 516, 777, 846, 738.

Instructions for addressing the remote to the TV
1. Press and hold down the TV mode button until all the mode buttons light up red.
2. Enter the 3 digit code for you TV.
3. Press the pound(#) button once.
4. Test the TV functions on your DISH remote.
5. Press the SAT button once.

Nov 12, 2011 | Universal Remote Control DIRECTV Universal...

1 Answer

My moms 2000 deville won't start after the key was


Try charging the battery or jump start it.

Aug 03, 2011 | 2000 Cadillac DeVille

3 Answers

Restore emachine


Your machine has two ways of repair: SYSTEM RESTORE and SYSTEM RECOVERY. System restore is a Windows utility that rolls the machine back to a point where the machine worked before the problem. System recovery is an eMachines tool that puts the machine back the way it was when you first got it. Restore wont delete your data, recovery will and can. If the problem is catastrophic, and youve backed up your data off of the machine, use the recovery option. Your recovery partition (or a recovery disk) is needed to do this, and it involves pressing a key while the computer boots up. Check your documentation for your model of machine.

Mar 24, 2009 | E-Machines (T2824) PC Desktop

1 Answer

Emachine wont start, just beeps


This is probably a problem with your DIMM(RAM) Did u recently install an extra RAM?If yes then remove it because the beep sound is due to the mismatch of frequency of two DIMM's. If not open your computer and check if the DIMM is loose just push it in and powerup your comp..Let me know if its fixed..

Oct 08, 2007 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...