Question about Bosch Nexxt 300 Series WFMC2201UC

1 Answer



Posted by on

1 Answer


It tend up to be the control panel on the unit

Posted on Sep 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Defy DAW 365 washing machine goes through the whole washing cycle but it just won't spin. It does drain between the washing cycles.

If the poly-vee drive belt in your washing machine has snapped, the motor will no longer be able to turn the drum. The drive belt is an important component of any washing machine as it drives the motion of the unit where the clothes are washed and spun. If your washing machine is making a loud noise or no longer spins, then the belt is probably worn or damaged.

Oct 23, 2015 | Washing Machines

1 Answer

Trying to get into the Bosch front load washer Model WFMC2100 to change the pump but I cant figure out how to open the casing. Do I have to remove the front or the bottom panel?

Hi, welcome to FixYa The method to replacing the pump on the WFMC series washers can be either from the front or from the back. Depending on the space your machine is installed usually from the back is less involved. Let me know which way might better suite you and I'll provide guidance the best I can. Thanks for choosing FixYa amd Good luck. I'll watch for your reply and post back asap. Regards, Macmarkus :)

Jul 28, 2011 | Washing Machines

1 Answer

My front loader fills with water, pumps and drains fine but the drum never moves or spins . Already cleaned pump, Checked belt and motor, belt is good and motor and drum spin freely.

Remove the back panel of the machine and operate it to check that the drive belts are being engaged to drive the drum. Observe the operation from a safe distance when you have the back off as there are live terminals within reach and you could be severely shocked if you come into contact with any one of them. Unplug the machine again before checking anything withing the workings.

May 21, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...

2 Answers

My Bosch washing machine has a drum that no longer turns. When the cycle reaches a point where the drum has to turn, I hear a series of clicks and the spin does not work at all. I took the back off and the...

Check you can move the drum freely by hand. 1. if its free - then check belt. 2. if it wines - check motor. 3. if does not move - you need to check for obstruction. hope this helps ....

Jan 07, 2011 | Bosch WFMC 3200 Front Load Washer

1 Answer

Hi. I have a Bosch precision wfg 2820 front load washing machine. The drum no longer spins round. The belt is still attached and seems to be ok. Any ideas where to look next? Thanks

You say seems to be ok.....can you hold the belt and turn the drum? Is there more that 3/4" slack in belt when you push it side ways? How old is this machine and have you ever had it serviced?

Jan 03, 2011 | Washing Machines

2 Answers

Bosch Nexxt Essence WFMC 2100 UC (washing machine) Water leak noticed on floor right in front after wash cycle is completed. This occurs every time I use the washer.

Bosch Nexxt Essence WFMC 2100 UC (washing machine) Water leak This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Oct 26, 2010 | Bosch WFMC2100UC Nexxt Essence Washer

1 Answer

The washing machine no longer spins. Is it worth

In order to determine that you will need to see if it has a belt and if the belt is bad, or the motor that spines the belt is working. If the belt is the only problem, it would be worth the repair.

Oct 27, 2009 | Amana 3.2 cu. ft. Top-Load Washer

1 Answer

Borch wfmc2100 watersoftner not draining

this is joyce

This will happen, I also have a front loader machine it also does this I just empty it out and start over every time. the water pressure is so strong that it leaves some in resorvor.


Feb 06, 2009 | Bosch WFMC 2100 Front Load Washer

1 Answer

Crunching sound at the commencement of spin cycle

The drive belt (or belts) of a washing machine may become worn or damaged, causing noisy operation or stopping the washer entirely. A damaged drive belt is easy to replace. Remove the back panel of the washer to gain access to the belt. To remove the belt:

Step 1: Loosen the bolt on the motor bracket and move the motor to put slack in the belt.

Step 2: Remove the old belt and stretch a new one into place on the pulleys.

Step 3: To put tension on the new belt, use a hammer handle or a short pry bar to push the motor into position while you tighten the bolt in the adjustable bracket. The belt should have about 1/2 inch deflection when you press on it at the center point, midway between the pulleys. If the belt is too loose, it will slip on the pulleys, causing the machine to malfunction. If the belt is too tight, it will wear very quickly and will probably become so hot that it will start to smoke or smell.

Loose pulleys can also cause problems. Most pulleys are fastened to shafts with setscrews around the hub of the pulley. These screws must be tight or else the pulley or belt will slip. The resulting malfunction may seem to be caused by a faulty motor, but it can be corrected by tightening the pulleys and adjusting the belt. For this reason, always check the belts and pulleys before working on the motor.

Nov 28, 2008 | Bosch Washing Machines

1 Answer

Our brand new bosch exxcel washing machine is jumping all over the place. We have checked it with a spirit level and it is level. The feet are tight. The washing is loaded level. What is wrong ?

hi The drive belt (or belts) of a washing machine may become worn or damaged, causing noisy operation or stopping the washer entirely. A damaged drive belt is easy to replace. Remove the back panel of the washer to gain access to the belt. 

Sep 12, 2008 | Bosch Washing Machines

Not finding what you are looking for?
Bosch Nexxt 300 Series WFMC2201UC Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers


Level 3 Expert

57279 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides