Question about Computer Cases
I had some problems with my ruby, so I rebooted system but the report option is gone now. any suggestions? This is where I get my daily register reports.
Your menus can appear and disappear with your security level on how you are signing in ... You might need a backdoor password from a verifone tech that will give all menus and access... Thanks Steve at myworldonline dot com
Posted on Apr 30, 2009
Tips for a great answer:
Dec 10, 2013 | HP 33et2batp61 - Cover Bottom Case Assy...
Sep 23, 2013 | Computer Cases
Dec 08, 2012 | ASUS Bios Chip:K43br, K43sa, K43sd, K43sm,...
Click on the Start menu. Then, select all programs, Acer Empowering Technology and Acer eRecovery Management.
If this is the first time you have opened the program it will prompt you to set up a password and create a backup CD.
Click the Restore button and select the option that reads "Restore system to factory defaults".
Wait for the computer to finish the restore process and reboot.
Restoring for the Boot Screen
If your computer will not boot up properly, you can attempt to reach the restore option by pressing the Alt button and the F10 button at the same time.
When the eRecovery menu appears, choose "restore system to factory defaults".
Wait for the recovery process to complete and the computer to restart
hope this helps
Oct 23, 2012 | Acer Aspire 5252 5253 5336 5552 5736 5736g...
hope this helps
Oct 09, 2012 | Gigabyte Ga-g31m-s2l Motherboard Intel G31...
some manufacturers use there own name as the bios password
try phoenix is this fails
restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer
Reboot the computer As the computer is booting repeatadly press the F8 key as the computer is booting
If done properly the user should get to a screen similar to the below screen.
Select the option for Safe mode command prompt only
Windows Advanced Options Menu
Please select an option:
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Start Windows Normally
Return to OS Choices Menu
Use the up and down arrow keys to move the highlight to your choice.
select safe mode with command prompt
Then type at the C:\> prompt: type
and hit Enter. You'll see a dash (-) at the DEBUG prompt. Now type:
o 70 2e
which will show as -o 70 2e at the DEBUG prompt. Hit Enter. Then type:
o 71 ff
and hit Enter. Finally type:
and hit Enter one last time to quit DEBUG back to the C:\> prompt.
Now you're ready to reboot your PC, and press the appropriate key or key
combo (look it up in your motherboard manual if you don't know it) to access
your BIOS Setup.
Youll notice the password is gone.
if this fails try typing
At command prompt type debug
you will get a - prompt where you can type the following (<enter> means press enter, not type enter*)
MOV AX,0 <ENTER>
MOV AX,CX <ENTER>
OUT 70,AL <ENTER>
MOV AX,0 <ENTER>
OUT 71,AL <ENTER>
INC CX <ENTER>
CMP CX,100 <ENTER>
JB 103 <ENTER>
INT 20 <ENTER>
<ENTER> just hit enter on this line
Basic BIOS password crack - works 9.9 times out of tenhope this helps
Jul 31, 2012 | Toshiba Satelite A135-s4527 A205 P205...
May 03, 2012 | Sony Vpl-x600 Lcd Video Data Projector W/...
Sep 20, 2011 | XION AXP 100 Gaming Series AXP100001BK...
Mar 26, 2010 | Compaq Computer Cases
Mar 31, 2009 | Sony Computer Cases
Sep 29, 2016 | Enermax Computer Cases
1,375 people viewed this question
Usually answered in minutes!