I have a dazzle dvc90 and vista 64 bit, they don't seem to work together.

Hello Joshua,



Instant DVD Recorder 2.6.1 UPDATER

• Please install the Instant DVD Recorder 2.6.1 UPDATER if you are using the Dazzle DVD Video Recorder, Dazzle Video Creator or Dazzle Video Creator Platinum with a previous version of Instant DVD Recorder. This updater also includes the hardware drivers.
• If you are using a Dazzle product already that includes Instant DVD Recorder version 2.6.1, then you do not need to install this update.

New with this version:

• added support for Windows Vista 64 bit and Windows 7 (32 & 64 bit)(
• Includes Windows Vista and Windows 7 drivers (for both 32 and 64 bit) for the DVC 100, 101, 103, 107 hardware NOTE: DVC130 and DVC170 don't have 64 bit drivers and can only be used with Windows XP and Windows Vista 32)
• 16x9 detection
• PCM Audio (already included with Instant DVD Recorder ver. 2.5)

Supported Hardware:

• Dazzle Video Recorder ( DVC90) - Windows XP and Vista 32 bit only
• Dazzle Video Creator ( DVC130) - Windows XP and Vista 32 bit only
• Dazzle Video Creator Platinum ( DVC170) - Windows XP and Vista 32 bit only
• Dazzle Video Creator ( DVC100 and DVC101) - Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• Dazzle Video Creator ( DVC103) - Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• Dazzle Video Creator Platinum ( DVC107) Windows XP 32 bit, Windows Vista and Windows 7 (32 bit and Vista 64 bit)
• and other compatible hardware

Installation Instruction:

• To be able to install this version, you must own an Instant DVD Recorder Version 2.x full version
• To install this Instant DVD Recorder version not as an update but as a full version you need to enter your Instant DVD Recorder Version 2.x serial number during the installation process. The serial number was included in your Dazzle product.
• With Windows Vista 64 bit or Windows 7 64 bit, you need to install Instant DVD recorder 2.6.1 as a full version.
• If you own an Instant DVD Recorder Version 1.x full version, to only install Instant DVD Recorder 2.6.1 full version.
• If you use this Instant DVD Recorder Updater to update the Instant DVD Recorder included with Studio Version 12, 11 or 10, please make sure that Instant DVD Recorder is already installed on you system. Please note that the version of Instant DVD Recorder included with Studio Version 12, 11 or 10 can't be installed under Windows Vista 64.

For Windows XP

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250


For Windows Vista 32 Bit

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

For Windows Vista 64 Bit

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

For Windows 7

http://apps.pinnaclesys.com/cdb/register/enter.aspx?checkRegistration=1&langue_id=7&supportFileID=35261&productid=2250

Hi longreeno
You can download the driver from here : http://driverscollection.com/?file_cid=402169179392baf0a1dbc60ab17
No guaranty it will work under Windows 7 , the device is outdated .
Best regards ,
fanaudi .

Check the version of your software. You'll need version 2.6.1 if you're trying to use Vista or Windows 7. Older versions of the Dazzle software will not work with XP 64 bit, Vista or 7. This link will take you directly to the Pinnacle download page for the updater package if that's what you need.

Hi-8 capture often requires using a Firewire connection instead of USB. Check the device's details to see if that may be the issue.

Hope that's helpful.

Welcome to Fixya,
It will not showed up if your Windows is Vista or Windows 7 64 bit. If ever you need to download and install the driver for your dazzle Device. You can download it to Pinnacle website.

Hi and welcome to Fixyah,

Yes it will work with Windows 7, The only problem that you encounter is if the driver of your device is not detected. Remember that the disc of Instant DVD recorder work with 32 bit only and not the 64 bit.
But no worry there is available driver for 64 bit if your Windows 7 is a 64bit.

Hi and Welcome to Fixya,

The reason why it is now showing because your computer did not detect it. If your Windows operating system is vista 64 bit then go ahead and download the driver in here. www.pinnaclesys.com then click on support, download/Studio and dazzle hardware for vista.

Hopefully it helps you.

Hi and Welcome to fix ya!

If you used Window 7 64 bit or even Vista 64 bit then go ahead and visit Pinnacle web site and download the driver for your device. That is the reason why you can't set the time to record. On step number 1 make sure that choose your 500-usb device then go back to step number and click on the small circle and put the valid time to record.

Hi,

I suggest to you to uninstall your Instant DVD recorder program and then download and install this update version http://pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Home+Video/Studio+Plug-Ins/Instant+DVD+Recorder+Support/Download+Area/Drivers+-+Updates/IDVDR261.htm?mode=documents&Display=1

Checked also if your vista is 32 bit then download under 32 bit but if that is 64 bit then download for 64bit. Try again.

I think cannot support the DVC90 drivers on vista.

Hi there!

Try unplugging the DVC90 and uninstalling it from Device Manager. Then go to the Control Panel and delete all the drivers you find. Reboot and try the installation again. If I remember correctly you can run PCLUSB2.exe first to get the drivers on your hard drive and then plug the device in. When you do that just point the driver install to the folder that the drivers got installed to.


Have fun!

*Your vote is highly appreciated. Thanks in advance!