OK you are probably going to think I am loony giving you this advise But No I am completely sane!
Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.
Blow
around the lens in all the extension joins the firmly slap it in the
palm of you hand with the side of the camera making contact with you
palm. Do the procedure two or 3 times and inbetween the slaps turn it
on to activate the lens mechanism. I have now fixed about 80 of these
cameras with this method. I obtained the fix from Sony who charge $90
to do exactly the same. Keep at it as it will eventually work. One tip,
make sure the battery is charged before you do this.
when i turn on my camera ,after message"access" it message "turn off and on...
(More)
when i turn on my camera ,after message"access" it message "turn off and on again" . it's lens come out but don't back full
when i turn the dsc w30 on the lens comes out but then i get access then turn camera off then on...
(More)
when i turn the dsc w30 on the lens comes out but then i get access then turn camera off then on again done thi many times but to no avail