Question about Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

1 Answer

My Bissel stopped working and have no clue why?

I was vacuuming one day and all of a sudden it just stopped working. I went through the whole thing and could not find anything wrong. Is there something I am missing? I have even searched the whole house for my manual but I am pretty sure that I threw it away. If anyone has a link to where I may find a manual it would greatly appreciated. Thank you for your time.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

Try Bissel .com, maybe you can download a manual from there. But if it just quit, the cord maybe bad. Alot of times if you unplug the cord by pulling on the cord rater then the plug, you cause the wire to eventaully break. That would be the first thing I would check. ( I am assuming that your vac just went completely dead.)

Posted on Jan 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My bissel shampooer is veryloud&smellslikeit'sburning


sme vacuum cleaners have a natural smell, forvexample, mine smells like bacon while vacuuming.
the loud part...
it has sucked up something bg that blocks the ath of air, and by the time goes on it will be like a wistle, or will stop being loud as the thing moves out

Apr 22, 2013 | Bissell 1960-3 QuickSteamer Plus Upright...

1 Answer

I have a bissel proheat upright steam cleaner that will not spray water....why?


I know exactly! You need a new pump. I have 2 of these beauties. They work great till they quit all of a sudden. Did you register your warrantee? Bissel has great coverage. Call the number on your machine!

Sep 01, 2011 | Vacuums

1 Answer

Solution not coming out


The solution is to throw the piece of junk out! Last week my BISSEL upright rug shampooer stopped spraying and I did all the *fixes* that I could find on the internet, short of new parts. It's in the Trash now. Today my BISSEL SpotBot stopped spraying...I've used it maybe 10 times. BISSEL makes junk, IMO.

Sep 09, 2010 | Bissell SpotBot Robotic Wet/Dry Vacuum

1 Answer

My brand new bissel little green proheat pet series is spraying solution however it's not hot when it comes out. I put hot water in the tank & turned the heater on. Isn't this the whole point?


Have you checked the user manual? Can be found at http://www.bissell.com/searchresults.aspx?searchtext=little green&mode=userguides

If there is no element then the water will cool down naturally.

May 21, 2010 | Bissell 1425 Little Green ProHeat Handheld...

2 Answers

Bissel steam mop - no more steam


You have to open up the cleaner, disconnect the pump from the steam chamber you then have to put it in a vise and remove the brass hose fitting on each end. Clean the springs and chambers but the main thing is a channel that joins the two chambers has to be cleaned out.

John

Jul 07, 2009 | Bissell 1867 steamMOP Stick Vacuum

2 Answers

Motor Fried?


kind of hard to say. these are pretty simplistic vacuums. the beater bar is still spinning because it has a seperate motor. the main motor which creates the suction sounds as if it overheated and just gave out. in most cases a replacement motor would cost you 79.99 usd. if the wires are broken make sure first before going any further. take it apart and inspect them and make sure they are on the motor itself correctly. usually eurekas are coded so they only go on one way but im not completly familiar with this unit. so check that and make sure every connecting point is snug and secure.

Nov 30, 2008 | Eureka 431BX Bagless Upright Vacuum

1 Answer

Bissel vacuum cleaner


That is the problem with a bagless, but if you keep the filters clean it won't be quite as dusty.

Jul 02, 2008 | Bissell 3594 CleanView PowerTrak Bagless...

1 Answer

My power brushes on my bissel carpet cleaner stopped working. They do not rotate. This is the 2nd power cleaner I have bought and it has the same problem as the first one. What is the problem with the...


The brushes will only work if the handle is released and the ProHeat vacuum is running . There is a micro switch inside the lower handle that switches on the DC carpet brush motor. The DC power for the motor comes from a Bridge Rectifier on the PC Board. petedcurtis@gmail.com

Apr 18, 2008 | Bissell Vacuums

Not finding what you are looking for?
Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Brad Brown

Level 3 Expert

17473 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...