Question about Fisher Paykel EcoSmart GWL15

2 Answers

Washing Machine stopped through cycle and now will not turn on

My washing machine filled with water and then stopped mid cycle and it was beeping. I tried the power button the washing machine and it would not turn off the washing machine, it just keeps beeping and the lights flashing. I have now taken out the clothes and removed the water that was in the machine and pushing the power button but it still wouldn't work. I have turned it off at the power point but it still will not work just beeps and nothing else. Please help if you can, willing to try anything. Thanks fisher & paykel ecosmart washer just stop working with 3 leds lit up ( wash -2 middle 3rd and 4th leds  and spin led still lit up... no power led lit up)  i tried to run diagonitc program on it by turning on power/washdown then spin up.. it doesnt workat all...pleas help thanks

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher Expert
  • 555 Answers

The Error code you have is 110
Here is info on fault code 110

110. (01101110) Motor Bridge Thermistor Open Circuit
The motor bridge thermistor has been detected as open circuit. This means that the Motor Control Module can no longer monitor motor bridge temperatures. This suggests that the motor bridge thermistor has been damaged or removed from the PCB.
Primary Source: Motor Control Module.
Action: Replace Motor Control Module.

Posted on Dec 14, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 288 Answers

Check the wiring harness, connections, contacts, etc. Look for some corrosion and loose connections. Also, check the water inlet for anything that may cause a reduction in water flow.

Posted on Dec 02, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Its stops when it reaches in 39 minute the function set on cottons what is the problem


Try resetting the mainboard by removing the wall plug overnight. May also be a faulty lid switch if it is a top loader.

  • Hello, my washing machine stops completely when it reaches ... www.shopyourway.com > Manage My Life > Questions ... my washing machine stops completely when it reaches the pause cycle, ... Answered in 5 minutes ... Kenmore washing machine 417 44252500.
  • Washing machine stops mid cycle - White Goods Help www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help Possible causes when washing machine stops mid cycle by a repairman with 30 years experience.
  • What could cause my washing machine to stop before the ... diy.stackexchange.com/questions/21181/what-could-cause-my-washing... What could cause my washing machine to stop before the ... i.e. it never reaches the end of the cycle ... What would cause my washing machine to stop at the rinse ...
  • Washer Stops Mid Cycle - Repair Parts - RepairClinic.com www.repairclinic.com/...A-Washing-Machine/50---/Washer-stops-mid-cycle ... listed below for the symptom Washer stops mid cycle are ordered from most likely to least likely to occur. ... Electrolux Front Load Washing Machine Disassembly
  • once my washing machine reaches the rinse cycle, about 3 ... https://answers.yahoo.com/question/index?qid=20080526150940AA3izVT
    • RESOLVED
    • 6 POSTS
    • 5 TOTAL ANSWERS
    2008-05-26 · Once my washing machine reaches the rinse cycle, about 3 minutes after ... Once my washing machine reaches ... My washing machine stops after the ...
  • Common Problems to all Washing Machine Brands ' Washing www.appliancerepair.net/washing-machine-repair-2.html Washing machine designs vary widely, ... but stop agitating after a few minutes and fill some more. ... stop the spin cycle and unplug the washer.
  • My washing machine will not spin and now it does not stop ... www.shopyourway.com > Manage My Life > Questions My washing machine will not spin and now it does not stop when it reaches the water level. ... Answered in 5 minutes
  • washer stops in the middle of washing cycle - Appliance ... forum.appliancepartspros.com > ... > Washer Repair
    • 6 POSTS
    • FIRST POST: 2012-02-07
    2012-06-22 · Appliance Repair Forum > Appliance Repair Help > Washer Repair » washer stops in the ... but when the timer reaches 24 minutes left to ... Washing Machine stops ...
  • LG Washer Stuck Timer 2 - YouTube Youtube
    • BY SBUBANDIT
    • 14 MIN
    • 4.9K VIEWS
    2012-08-29 · Video embedded · In this video the washer display shows 8 minutes remaining in ... machine stops and turns ... 10kg Top Load LG Washing Machine


  • http://www.bing.com/search?q=washing+machine+stops+when+it+reaches+39+minutes&qs=n&form=QBRE&pq=washing+machine+stops+when+it+reaches+39+minute&sc=0-47&sp=-1&sk=&cvid=04BC47135B524BD8B5BAC3759F010C1B

    Jun 10, 2016 | Washing Machines

    1 Answer

    Forty cycle takes some water in then stops


    Beko WM5100W Washing machine wash/spin problem ...

    ? 3:59
    https://www.youtube.com/watch?v=rih6H1cpu9Q
    Jun 12, 2012 - Uploaded by ilona ilona
    problem in washing cycle. fast spin for few seconds and cut off .... I have same machine, it starts up fills half way with water then stops :'.

    Washing machine stops mid cycle - White Goods Help

    www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help

    Jan 10, 2016 | Beko Wm & Wma Models Washing Machine Motor...

    1 Answer

    Doesn't work. Why does it stop mid-cycle?


    washing machine stopped mid cycle, won't drain : DIY - Reddit

    https://www.reddit.com/.../washing_machine_stopped_mid_cycle_...

    RedditSep 3, 2014 - helpwashing machine stopped mid cycle, won't drain (self.DIY). submitted 1 ... I get home. Any ideas on how I can just drain the water out of it?

    Troubleshoot - washer stops mid cycle, won't drain or spin ...

    ? 1:58
    https://www.youtube.com/watch?v=6Gc0ZgLD6a4
    Jun 20, 2012 - Uploaded by searspartsdirect
    Troubleshoot - washer stops mid cycle, won't drain or spin .... I agree, this was not helpful, and did not address the no spin issue. like thanks. ... how to fix a Kenmore / whirlpool washing machine that wont drain agitate or spin ...

    Washing machine stops mid cycle - White Goods Help

    www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help
    Sep 9, 2013 - Possible causes when washing machine stops mid cycle by a ... If thewashing machine can't drain the water out then it will stick on the rinses, ...

    Why does my washer stop half way through cycle - Ken



    Dec 18, 2015 | Washing Machines

    1 Answer

    Skipping wash cycle


    follow this steps and fix it. God bless you

    Lid Switch Assembly

    If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Door Lock Motor and Switch Assembly

    If the washer stops mid cycle the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Water Inlet Valve

    If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Main Control Board

    If the washer stops mid-cycle the main control board might be defective. This is not common. Check other causes first such as the lid or door switch and other components.


    Enter your model number to see parts for your washing machine.
    Help me find my model number


    Timer

    If the washer stops mid cycle the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.

    Jul 13, 2013 | Admiral 3.4 cu. ft. Top Load Washer in...

    1 Answer

    Moffatt washer is washing and draining but not spinning out the clothes


    All content © 2000 © 2009 Washerhelp
    > Home / Repairs DIY washing machine advice (part 8) Washing machine sticks or stops mid-cycle repairs-sm.gif A very common fault on washing machines is when the program timer fails to complete the cycle and stops part way through. Many people blame the program timer for this but although it is a possible cause, there are many more likely causes for this fault. The program will stick if the heater isn't working, if the thermostat fails, if it can't fill up with cold water for the rinses, if it can't empty the water etc. There are too many possible causes of this fault to be able to give anything other than rudimentary advice. However, the common causes of a washing machine sticking that can easily be fixed are filling and emptying problems.
    Check that the cold water supply is available to the washing machine, which is a common cause for sticking on rinses. If the washing machine appears to stop mid-cycle and isn't filling with water on rinses then see Washing machine won't fill with water (or no water goes into washing machine) before calling an engineer. If the washing machine can't drain the water out then it will stick on the rinses, or it will abort with an error code. If you can see water still inside the washing machine then check the following advice Washing machine won't empty water

    Dec 03, 2009 | Washing Machines

    1 Answer

    Washer stop in middle of rinse cycle


    All content © 2000 © 2009 Washerhelp
    > Home / Repairs DIY washing machine advice (part 8) Washing machine sticks or stops mid-cycle repairs-sm.gif A very common fault on washing machines is when the program timer fails to complete the cycle and stops part way through. Many people blame the program timer for this but although it is a possible cause, there are many more likely causes for this fault. The program will stick if the heater isn't working, if the thermostat fails, if it can't fill up with cold water for the rinses, if it can't empty the water etc. There are too many possible causes of this fault to be able to give anything other than rudimentary advice. However, the common causes of a washing machine sticking that can easily be fixed are filling and emptying problems.
    Check that the cold water supply is available to the washing machine, which is a common cause for sticking on rinses. If the washing machine appears to stop mid-cycle and isn't filling with water on rinses then see Washing machine won't fill with water (or no water goes into washing machine) before calling an engineer. If the washing machine can't drain the water out then it will stick on the rinses, or it will abort with an error code. If you can see water still inside the washing machine then check the following advice Washing machine won't empty water

    Dec 02, 2009 | Whirlpool Duet GHW9150P Front Load Washer

    1 Answer

    I have a Frig. Gallery washer and it will fill up and drain but not spin. What could be wrong and how can I fix it??


    All content © 2000 © 2009 Washerhelp
    > Home / Repairs DIY washing machine advice (part 8) Washing machine sticks or stops mid-cycle repairs-sm.gif A very common fault on washing machines is when the program timer fails to complete the cycle and stops part way through. Many people blame the program timer for this but although it is a possible cause, there are many more likely causes for this fault. The program will stick if the heater isn't working, if the thermostat fails, if it can't fill up with cold water for the rinses, if it can't empty the water etc. There are too many possible causes of this fault to be able to give anything other than rudimentary advice. However, the common causes of a washing machine sticking that can easily be fixed are filling and emptying problems.
    Check that the cold water supply is available to the washing machine, which is a common cause for sticking on rinses. If the washing machine appears to stop mid-cycle and isn't filling with water on rinses then see Washing machine won't fill with water (or no water goes into washing machine) before calling an engineer. If the washing machine can't drain the water out then it will stick on the rinses, or it will abort with an error code. If you can see water still inside the washing machine then check the following advice Washing machine won't empty water

    Dec 02, 2009 | Frigidaire Affinity ATF7000E Front Load...

    1 Answer

    Fisher&Paukel washer


    might have something stuck in drainage area. see my post on "eco smart won't drain, smells hot" on how to remove motor on bottom of washer.

    might also try another website, www.ths.gardenweb.com/forum/laundry to see if anyone on there has an answer.

    Oct 13, 2008 | Fisher Paykel EcoSmart GWL15

    2 Answers

    Washing Machine stopped through cycle and now will not turn on


    I can help with this. I work on the units they make. If you can email me @ curator@artinallforms.com I will guide you through

    Jun 16, 2007 | Fisher Paykel EcoSmart GWL15

    Not finding what you are looking for?
    Fisher Paykel EcoSmart GWL15 Logo

    547 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Fisher Washing Machines Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Mike

    Level 3 Expert

    4356 Answers

    Gerry Harvey
    Gerry Harvey

    Level 3 Expert

    1474 Answers

    Are you a Fisher Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...