Question about Denon DVD-5000 DVD Player

1 Answer

Response to the solution posted

Actually my Denon DVD-5000 will not play CDs either, and it's way too large to be a DAC. Anyway, the fact that it goes into standby on its own is a real turn-off. So it would not make a very good DAC either.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers
Re: Response to the solution posted

See my other post. its very easy to replace the mechanism. Theres a printboard that seems to be hard to remove, but beware, you only need to remove the screews that holds the brassboard, and all the cables. Then You have acces to the Mec, wich only needs four screews to remove and thats it. Should only need half an our or so.

Good luck. Niels Peter - Denmark

PS Actually You can disable the automatic standby. Read the manual, cant remember the procedure.

Posted on Jun 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Formats for dvp-ns70h

selectable 720p/1080i output via HDMI digital interface (separate adapter available for TVs with DVI input)
selectable progressive-scan mode for smoother video with HD-compatible TVs (via the component video output)
optical and coaxial digital outputs for Dolby Digital/DTS /PCM
  • 1 set of audio/video outputs (composite, S-video, 480i/480p component video, and HDMI)
  • plays DVD-Video discs, DVD-Rs & DVD-RWs, and DVD+Rs & DVD+RWs
  • plays CDs, CD-Rs & CD-RWs, and MP3 CDs
  • plays digital picture CDs (JPEG)
  • remote control (multibrand for TVs)
  • 108MHz/12-bit video DAC
  • 192kHz/24-bit audio DAC

Oct 14, 2012 | Sony DVP-NS70H DVD Player

2 Answers

Denon 2910 CD player malfunctions

is this happening with all the cds??
the case may be with the cd sometime..where the tracks wouldnt have been properly completed...

Jul 13, 2008 | Denon DVD-2900 DVD Player

1 Answer

Transport problem on denon 2930

i strong recommend to go to the repair shop TV for fix it or evaluation if the cost is NOT higher, that will be better to buy a NEW one.
see the block diagram, and see how many circuit are involved .God bless you

Aug 02, 2012 | Denon DVD 2930 DVD Player

1 Answer

Denon dvd 1730 plays no cds

It is likely a issue with the optical pickup in the unit or the unit needs cleaning (not likely but possible)

Apr 08, 2012 | DVD & Blu-Ray Players

1 Answer

Denon 1611 region free hack

Question is, does in state from the manufacture that it is in fact, Region Free? If its not, you won't be able to play it. In your question above, you say "hack", which means that someone outside of Denon, has rewritten the firmware, for which there you are gambling that the DVD may not ever play again, without some serious repairs. If you would like more assistance, please contact me at my website, Thank you.

Dec 26, 2011 | DVD & Blu-Ray Players

1 Answer

My Denon DVD 955 frequently fails to play audio CDs, but never any problem with DVDs. Ist there a fix you can suggest, please? **** P

in dvd player this problem can occur when there is a problem with the spindle motor. it will not rotate at the required RPM for cds. just check the spindle motor. if available replace it and try again.

Jan 04, 2011 | Denon DVD-955 DVD Player

1 Answer

Audio CD playback problems

the problem may be in that you have two audio outs conected, one stereo via rca and other hdmi remember that hdmi is audio and video outs or two digital outs one hdmi and other coaxial or optica to tha dacs, put only one outs and thats the solution
i hope i could help you

Jun 02, 2009 | NAD T 515 DVD Player

1 Answer

Audio CD playback problems

may be you have another digital outs like and hdmi, be sure that you have only one audio out

May 25, 2009 | NAD T 515 DVD Player

3 Answers

Dvd doesnt play but cds do

The problem is the laser. For $13 you've got the best CD player on the planet.

Nov 04, 2007 | Denon DVD-5000 DVD Player

1 Answer

Player does not recognize or play CDs

Thats how some manufacturers sell there replacement parts as they come into the country assembled. it cost let to import but more for us. i once needed a spindle motor for a unit, no replacement except the manufacturer part. Had to buy entire laser assy and thats what they bare selling you too. If you already tryed to manualy clean the lens, look on the side of the laser pick-up. it might be made by sony or a popular manufacturer go by the number printed on the label on the side or bottom of the laser assy unit itself. Good Luck

Aug 17, 2006 | Denon DVD-3910 DVD Player

Not finding what you are looking for?
Denon DVD-5000 DVD Player Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

66413 Answers

Jonathon summesfield

Level 2 Expert

284 Answers


Level 3 Expert

4518 Answers

Are you a Denon DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides