Question about One For All URC-3021 Remote Control
Try searching for your code. If it is not listed in the manual. Here are the instructions to search for your codes:
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
5. To lock in the code, press and release SET.The LED will
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
Here is your manual:
If the code search funtion does not work you may need to purchase a diffent brand of universal remote.
Posted on Dec 12, 2007
Tips for a great answer:
Nov 27, 2012 | RCA Remote Controls
Aug 25, 2011 | DISH Network IR Remote Control
Jul 09, 2009 | RCA Universal Remote Control
Jun 06, 2008 | RCA Universal Remote Control
Jan 01, 2008 | One For All URC-3021 Remote Control
108 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: