Question about ASUS M2N-MX Motherboard

1 Answer

AMD Athlon 64x2 can't install, help!

Hi everyone, I have a problem which may or may not be solvable but I thought it'd be worth asking here.
I am totally new to this so please be as simple as you can in any replies and if need be talk to me like a complete idiot.

I've been given a AMD Athlon 64 x2 Dual Core 6000+ AM2 blah blah blah processor and wanted to stick it in my setup if possible which on inspection has a M2N-MX motherboard. Now I thought It'd be simple just taking out the old CPU and putting in the new one but alas - it didn't work, instead I just got a message on boot up saying "NO SUPPORT CPU" and then it turned itself off after 15 seconds, after a bit of investigating on ASUS's website I found I could upgrade the BIOS that would solve this problem, I did - and still the same result.

So does anyone know a way around this? Or are they just not going to work together?
I don't know enough about these things to go any further and was wondering if anyone could help please?

Any help would make me very happy,
thanks in advance folks,
Guy.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,601 Answers

Which version update did you do?
only after 0804 will work

FAQ from ASUS

My system may refuse to boot under AMD Althon64 x2 6000+ CPU (OPN :ADX6000IAA6CZ) with 2x DDRII-800 memory combination.
The same problem does not happen with other CPUs, nor would it happen with memory modules of any lower specifications.
How can I solve this problem?
Please kindly update motherboard BIOS to version 0406 or later to resolve this problem.
BIOS 0406 can be downloaded form the link below:
ftp://ftp.asus.com.tw/pub/ASUS/mb/socketAM2/M2N-MX%20SE/M2N-MX-ASUS-SE-0406.rar

Posted on Dec 02, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an AME10001 Built in Electric Oven and need a new door. Can you please help?


Hi always tell everyone brfore buying new check area appliance repair fo used parts , cause a door will cost more then a used unit is worth , if you still need help locating please email all info to me and the area you live in and i will help search for youthanks Frank

Dec 05, 2011 | Ovens

1 Answer

1995 Explorer fuel pump died. They want $827 to replace it.


You are right- it is probably not worth keeping. By the time the fuel pump goes- it will not be long befor everything else goes- I have a 95 with about 200,000 miles and could have bought a new car with all the money I spent on repairs....

Nov 10, 2011 | 1995 Ford Explorer

2 Answers

How can i send virus to mobile phone?


You can use you bluetooth option and only if the recipient has bluetooth on.
Use the program Bluetooth hack.

Aug 28, 2010 | Nokia 3310 Cellular Phone

1 Answer

2005 Lexus RX330 HID ballast replacement, passenger side headlight. What is the removal procedure please?


I have a 2005 Lexus Rx330 with HID AFS headlight. My passenger side light went out. I thought the bulb burnt out, so I bought a new bulb. After replacing the new bulb, it happened exactly like my old bulb. It light up lightly and then total black out. What's wrong with it? I thought the ballast burnt. I called Lexus dealer and asked for the new ballast/transformer. Surprised me, they don't know what is it. They told me they only know the wiring harness and the socket, but not the ballast ??????? Could you tell me what do I need to replace?

Thanks,

Feb 02, 2010 | 2005 Lexus RX330

1 Answer

When i connect TK file explorer and try to copy Jar and Jad files from my PC to phone error msg pops up and Tk file expl closes itself without copying anything


hi everyone.
i had the same problem with the file explorer & i've found a solution:
it doesnt work because the samsung s5230 has a totally new firmware.. so its hopeless.. it is never going to work..

you can change your firmware.. but if you do just one mistake your mobile is useless.. :( i dont thinks that this is worth it.. but if u want to know how it works i can send you a guide.. but it is in german...

hope it helped


Dec 15, 2009 | Samsung SGH-S5230 Cell Phone

1 Answer

Sharp Fax Machine UX-485 recipiant receives black page


If you receive clear copies. Make a test copy. If it come out all black. Yes replace your fax . you have a bad scanner . cheaper to buy a new fax.

May 21, 2009 | Sharp UX 510 Plain Paper Thermal transfer...

5 Answers

Presario F700 Wireless


You are f****d. This is a hardware problem, my sister-in-law is having the same problem. I probably have to figure out how to order a replacement part. Hopefully the wireless card isn't directly soldered into the mainboard. But I imagine it is. Which would mean an entire mainboard replacement. Which would mean buying a new laptop since it's not worth the replacement.

Next time. Get a mac. I'll tell her the same.

Oct 25, 2008 | Compaq Presario 700 470024-192 Notebook

1 Answer

New laptop, automatically connected to belkin54g, suddenly stopped working. please help!


well maybe you have to connect properly, fist of all i only know the windows vista version but go to .start, connect to, then a list of all available routers will appear, select yours (or the 1 your using). it will then ask you for a password, type it in. click connect. wait for it to load and there you go
i hope that helped

Oct 01, 2008 | Gateway Belkin 54g Wireless DSL/Cable...

3 Answers

Hi,my lexus is 200 cd player is not working.it says err3.wht does that mean and what is the solution?thanks


get a new cd player. its a read error from the laser im pretty sure. please email me at meanness628@aim.com if you have anymore info

Sep 29, 2008 | 2005 Lexus IS

1 Answer

Ink replacement


Did you tell it you had replaced the toner cartridge with a new one?

If not, it's probably worth opening up the printer again, removing the cartridge and putting it back in again and seeing if that question pops up so you can answer it.

I hope that helps, if you have any further problems, please add them ass comments to this question. If I have been able to answer your question (or not) please click on one of the ratings buttons to let everyone know how I did.
Thanks for your feedback, and good luck.

Jan 12, 2008 | Lexmark JetPrinter X1185 All-In-One InkJet

Not finding what you are looking for?
ASUS M2N-MX Motherboard Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18426 Answers

Alun Cox

Level 3 Expert

2678 Answers

David
David

Level 3 Expert

781 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...