You should absolutely be able to play the recorded DVDs from your camcorder in your DVD player, as long as you remember to finalize the disc and the disc is compatible with the player. If your DVD player is less than five years old or so, you should be fine, provided you're not using dual-layer discs.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
http://gdlp01.c-wss.com/gds/0900000562/DC210NIM-EN.pdf here is the manual look on page 62 for playback on a pc. you need a dvdrom drive. if you have one make sure you have software like windows media player 10 or 11, or powerdvd to play the movie. as for editing the video is a little bit more tricky. you are going to have to "rip" the video and then combine it in a program like windows movie maker with the other dvd that has been ripped too. when you are done editing in windows movie maker just choose avi or dvd type.
To record to the DVD, connect the A/V cables from the JVC GR-D347U to the A/V In on the DVD recorder. Since the DVD already plays to the TV, you just have to keep the TV set to that input. Put a blank DVD in the recorder. Set the DVD recorder to record on from the appropriate Line In (input) with the DVD as the target recording media. To make sure that all of the devices are on and receiving the output from the camera and DVD recorder, start playback on the GR-D347U and check that it displays on the TV. Forward the tape in the camera to the point where you want to record to the DVD. Stop playback. Press REC for the DVD recorder and restart your playback. Press stop for both the DVD recorder and then the camera when the desired video segment has been played back.
I have a Samsung recorder, and it requires you to "finalize" the disc before it will play on another unit. Check your manual for specifics, or look in your menu for the "finalize disk" option. Hope this helps...
That's because this is a quad. It compresses all 4 video feeds into 1 file. When you play it back, it decompresses the video and shows you each camera. Playback through this unit is the only way to see 1 camera at a time.
To be able to copy 1 camera shot to a DVD, this is what you need to do:
You need to have a TV with Video in and Video out jacks.
Connect the Quad to the TV Video in jack and connect the TV Video out jack to your DVD Video in jack. Playback a single camera shot on the quad to the TV and hit record on your DVD. - The DVD will record whatever is shown on the TV.
Thanks making sure I was in play mode with the adapter plugged in worked. The trick was remembering what play mode was--that's where you can see the scenes on the playback screen, not the screen you see when you are looking to record something.