Question about Uniden Cordless Phone

1 Answer

I just received my cordless, Panasonic Model #KX-TC1703 PHONE

THE PHONE IS PLUG INTO THE WALL IT SAYS 0 NEW CALL. THERE IS A ( ASMALL BOX ENCLOSED), ON HTE DISPLAY WINDOW. I DON'T HAVE IT PLUG INTO THE TELEPHONE JACK YET. THE PHONE HAS BEEN OFF SINCE JUNE 27, 2007. MY MOM PASS AWAY IN SEPT 2007. NOW I AM TRYING TO PROGRAM PHONE TO USE NOW, WHERE DO I START?

Posted by on

  • SOUTHIE Dec 02, 2007

    The mess. is on the display window on phone. Also there is a small box inside of the ( )'s.



    (No Instructions available to me)

  • SOUTHIE Dec 02, 2007

    Thank You for any help that you can do.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 537 Answers

I suggest you read the manual. If you don't have it, search for it and download it

Posted on Dec 02, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have AT&T cordless phones (4). All of a sudden, they all say "no line". Please help


Dianne:

The phone cradle that is plugged into the telephone line coming from the outside of the house is having problems. Check the wall plug where you plug the phone charger into the wall (not the power plug... the telephone wire plug) check to see that both ends of that wire are plugged in properly... One plug goes into the wall, and the other plugs into the charging unit.

Oct 01, 2015 | AT&T E5865 5.8GH Cordless Phone with...

1 Answer

Does the phone run on batteries


The phone can get some power from the loop like a basic telephone. That should suffice to make phone calls.

But many of the advance features and display options cannot work on loop power alone. You have to get a special plug that plugs into the wall AND the phone jack. Then plug the phone into that.

I am not aware of any battery in the phone.

Aug 08, 2013 | Nortel Aastra M5316 Meridian Digital...

1 Answer

Installing my answering machine to my phone


if there is a jack in the back of the box that you plugged into the wall , plug the phone line into it

Nov 20, 2017 | Bell Northwestern Phones - DigiMate...

1 Answer

I have an HP 2510 printer. I cannot use it to fax because once I plug the phone jack into the printer I get a busy signal. If I plug the jack into a phone, it works fine. How do I get the printer to...


Hi irwinbadin,

HP fax products are designed so that other telephone equipment can be connected on the same line as the fax. The unit must be connected first using a two-conductor fax/phone cable like the one that shipped with the HP product. Using a four-conductor telephone cable may cause problems receiving faxes or calls.

There are two different types of phone cables. There are two-conductor phone cables like what originally shipped with the HP fax product and there are four-conductor cables. HP fax products are designed to work with a two-conductor phone cable. Look at the end of the cable and verify that it has only two copper leads or wires. Replace any four-conductor cables with a two-conductor cable. Only two-conductor phone cables should be used to connect the all-in-one to the phone line.

Figure 1: The difference between a two-conductor phone cable and a four-conductor phone cable
reyjoshua07_5.jpg


Step one: Connect the phone line to the fax
The fax will have two or three sockets (or jacks) for phone lines. Some of these may have a removable plastic plug in them. These sockets will be labeled with text, To Wall Jack , or with a graphic of the wall jack. See Figure 1 below.

Plug the two-conductor telephone cable that came with the HP product into the telephone wall jack. Then, plug it into this socket as shown below.

reyjoshua07_6.jpg


In areas with above ground telephone lines and electrical storms (lightning), it is a good idea to purchase a telephone line surge suppressor and connect it between the telephone wall jack and the fax. This will help prevent damage to the fax from a lightning-caused power surge on the phone line.

Step two: Add other phone-line devices
To connect other telephone devices, use the other socket (or sockets) on the fax. These are identified by text or with a graphic of a telephone and/or computer.

Connect a caller ID unit between the fax and the telephone.
Use the information below that matches the devices you need to connect.

Fax and telephone
Connect a single-line telephone to one of the added sockets on the fax. The telephone will share the same phone line as the fax. See the illustration below.

reyjoshua07_7.jpg


Fax, answering machine, and telephone
When a telephone answering machine and telephone are connected, connect the answering machine to the fax and then connect the telephone to the answering machine as shown below.

reyjoshua07_8.jpg


Fax and computer modem
To use a fax and a computer modem on the same phone line, connect the fax to the computer modem. The modem socket on the computer may be labeled Line or Wall jack .

reyjoshua07_9.jpg


Fax, computer modem, and telephone
To use a computer modem and a telephone with the fax, connect the computer modem to the fax. Then, connect the telephone into the second phone line connector on the computer modem or the third fax socket (if it is available). The image below shows how to connect a computer and a telephone to a fax with two sockets.

reyjoshua07_10.jpg


Fax, modem, answering machine, and telephone
The image below shows how to connect a computer modem, answering machine, and telephone to a fax. Connect the computer modem to the fax, then connect the answering machine to the computer, and finally, connect the telephone to the answering machine.
If the fax has three phone line sockets instead of two, some of the devices can be connected to the other phone socket on the fax.

reyjoshua07_11.jpg


Hope it helps.

Thank you for using FixYa.

Jun 27, 2011 | Office Equipment & Supplies

1 Answer

L7780 cannot get dial tone on 2-line outlet. Are there any work arounds to this problem?


There is a problem either with the Line Interface Unit (LIU, also known as the fax/phone line connector) or the fax hardware, because the unit is having problems sending or receiving faxes. The unit may hang on "Initializing." This document explains how to troubleshoot the LIU and fax hardware. SOLUTION: Please perform the following: Front panel hangs on "Initializing"
  1. Pull the power cord connector from the back of the base unit to recover from the error.
  2. Unplug the LIU from the back of the ADF. It is located on the left side (facing it), and is where you plug in the telephone lines.
  3. Plug the power cord back in, power it up, and see if it hangs without the LIU inserted.
  4. If it does not hang without the LIU inserted, power the unit down, plug the LIU back in, and power it back up. If it hangs, the LIU is faulty.
  5. If it does hang without the LIU attached, unplug the ADF from the base and see if it hangs. If it does, the base is faulty.
Testing the LIU The primary test for the LIU is whether or not you get a dial tone. Sometimes, you need to re-seat the phone line several times to get a good connection. If after trying the things below, there is still no dial tone, or initialization hangs, the LIU may need to be replaced.
  1. Verify that the phone line is connected directly from the wall jack to the plug in the LIU that says "To Wall Jack."
  2. Verify that the LIU is plugged securely into the product. If it is not, there will be a message at power-up saying the LIU is not connected. If it is, the date and time will display.
  3. If the LIU was re-seated, cycle the power on the unit. The unit should display the date and time.
  4. Unplug all other accessories, like a telephone answering machine or modem. If the LIU appears to work fine after unplugging them, these accessories may be interfering.
  5. Place a document in the Automatic Document Feeder (ADF). The display will flash "Document Loaded."
  6. Press Start Fax to verify there is a dial tone. If so, try sending a fax.
  7. If there is not a dial tone, unplug the product from the wall jack, and plug in a regular telephone to verify there is a dial tone at the wall jack.
  8. If there is no dial tone on the telephone, the wall jack or phone line may be faulty

Oct 26, 2010 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

How do i program my nt8b20af-03 with an extension number?


If you plug the telephone into an activated (connected to the Norstar System) telephone jack, the lights should begin to blink while the phone boots-up. The system automatically assigns an extension number. To see what the ext. # assigned to the phone is, press "Feature * 0" (Button Inquiry) and press an intercom button. This will display the ext, # and Set Name of the phone.
Good Luck!

Aug 18, 2010 | NorStar Meridian M7310 Phone

1 Answer

Don't know how to connect


Hi, I'd love to help you with the problem you described.

  1. Connect your phone line (out of the wall or your phone modem supplied by your phone or cable company) into the jack on your MFC-240 has a picture that is shaped like a little telephone. These jacks are located on the lower left back corner when you are facing your printer.
  2. In the same location, there is another jack right next to the one you just plugged into. Take the phone cord that came with your printer and plug one end into the jack.
  3. Plug the other end of this cord into the base of your phone or answering machine.
  4. Test your connections by picking up your phone handset and listening for a dial tone.
  5. Next, set the receive mode your printer for fax only (if you set the receive mode to phone/fax or other mode, you could experience problems with your voice mail). Fax only will ensure that your printer will only answer fax calls. Here's how you do it.
Here's how:
  • Press the menu key on your MFC-240
  • Press 0 (display switches to initial set up)
  • Press 1 (display switches to receive mode)
  • Fax only should be the first item that shows on the display.
  • Press the ok button on your MFC-240. The machine is now ready to receive faxes.
If you have not done so already set up either your answering machine or your cable company voice mail.

If you found my answer to be helpful, please use our rating system to indicate your level of satifaction with my answer. Thanks for using FixYa!

Jan 28, 2009 | Brother Multi-Function Center MFC-240C...

1 Answer

How do you set the time and date?


Step 1.

Press the PROGRAM button, then press * * 1 2 3 4
The display should now read: USR-PGM NO?

Step 2.
Enter: 0 0 0
Display: Day/Time Set

Step 3.
Press NEXT (or the SPKR PHN button)
Display: shows date (if you need to change the date, see steps 5 thru. 10 below)

Step 4.
Press NEXT (or the SPKR PHN button) again
Display: shows time example: 12:00 AM
Step 5.
Enter the hour
to change current entry, press CLEAR (or the TRANSFER button)
Step 6.
Press --> (or FWD/DND button)
Step 7.
Enter the minutes
Step 8.
Press --> (or FWD/DND button)
Step 9.
Press SEL (or AUTO ANSWER/MUTE button) to change AM or PM
Step 10.
Press STORE (or AUTO DIAL/STORE) - Don’t forget this step!
Step 11.
Press END (or HOLD button)
Step 12.
Press SPKR PHN button or pick up and hang up the phone to leave programming mode.

Dec 20, 2008 | Panasonic KX-T7731 Corded Phone

1 Answer

AREA CODE


Just purchased the GE 25922 today. Looks like you can skip (ignore) the option to enter an area code.

United States' Area Codes are three-digit numbers. If the phone 'requires' entering a number you can use any three digit number. The purpose of this option is to display a local telephone number with only the 7 digits.

Example:
603 - 123 - 4567
'603' is the area code
123-4567 is the 7-digit local number.

If the area code option is programmed to '603', then if that number called '123-4567' would display on the Caller ID display.
Which now reminds me: you would need to also subscribe to Caller ID with the Telephone Company for the numberic display to occur.

Oct 27, 2007 | GE 25922 Cordless Phone

5 Answers

How do I set the time


It's not the make of telephone you need it's the make of system. eg. I have a KX T7730 telephone attached to a KXTES824 system (look on front of big box on wall). The procedure for changing KSTES824 is (must do from the person's phone who has the main extension)

program 0 071102 5 0858 0 store program
(date) ? time am

note: date is back to front don't know what the 5 represents and the 0 at the end indicates am, replace this with a 1 for pm. Obviously if you don't have the same system this is irrelevant - sorry

Sep 16, 2007 | Panasonic KX-T7730 Corded Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8080 Answers

Cindy Wells

Level 3 Expert

5586 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...