Question about Westell Wirespeed LiteLine 6100 (B9961001002) Modem

2 Answers

Westell 6100 dsl modem

I really need this,can anyone help? the ip address

Posted by on

  • lakehouse03 May 11, 2009

    I have a problem with a accessing a video phone from my work phne #. I was told that I need to have the firewall in my Westell 6100 disabled. Is that something I can do as verizon wants to charge me $14.95 for 10 months to make changes.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I use a Westell 6100 modem....internet goes out periodically and is not red...just blank....in a few minutes it comes back on....and later out it goes again....

Posted on Apr 28, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Open a internet explorer window and in the address bar type the address 192.168.1.1 (which is default) on the left colume scroll down and it should say internet status DSL link and some other stuff the last one is IP address. If you are not connected to the internet you will not have a IP address

Posted on Dec 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to connect DSL, computer will not comunicate with router.


Change your router local ip adress other than 192.168.1.1. Modem and router can't have the same ip address

Oct 24, 2009 | Westell Wirespeed LiteLine 6100...

1 Answer

Blinking light on Westell 6100 DSL modem


I have a westell 6100 modem also- The light your are talking about always blinks- it blinks as long as the internet is working (it is sending and transmitting data)

May 28, 2009 | Westell Wirespeed LiteLine 6100...

2 Answers

Ps3 key change timeout using westell 6100 modem on verizon


there might be a problem with the Linksys router, the Westell 6100 should be 1st set to bridge mode in order for your router to be connected to it. or there could also be a proble on the Verizon server.

Apr 10, 2009 | Westell Wirespeed LiteLine 6110 Modem

2 Answers

Can not setup modem:Westell 6100 to router:Linksys WRT54G


i think the best way is to describe to you the physical setup first. so you have a computer, a modem, and a router. the setup should be like this: from the walljack, the phonecable is connected to the 6100, make sure there are no micro filters connected between the walljack and the phone line because it will not allow you to connect to the dsl. from the modem, the data/internet cable at the back of it, using an ethernet cable, should be connected to the router. and at the back of the router E1 to E4, another ethernet cable is connected there and the other end of the cable is to be connected to your computer. you are right in bridging the modem, the reason for that is because both the westell 6100 and router have GUI's or Graphical User Interfaces, in short, they each have their own virtual brain. you will not have a connection if both of them have this GUI thing, so you need to bridge your westell 6100, so that the only GUI active is the routers. to bridge the modem you may need assistance from tech support of your ISP provider. assuming that's done, light status in your 6100 should have a solid DSL light. for the router, it should have lights in WAN, WLAN if you want to connect wirelessly and E1 to E4, whichever ethernet port you're using for a wired connection. you have to access the GUI of the router to make sure you have a routable WAN IP Address. As for the IP address in your computer, it should be a 192.168.x.xxx type of ip address. this is the LAN IP Address. Basically you need to have routable WAN and LAN IP Addresses to be able to connect online. you will need to configure the GUI of your router to be able to do this. for that you may need assistance from tech support of the router or if you can follow the instructions in the manual, by all means do so. the most important thing in this setup is bridging the modem.

Dec 20, 2008 | Computers & Internet

3 Answers

Can't find IP to access di-524 (in bridge mode?)


As Joed said, try resetting your router. This can be done by unplugging the device and pressing in a normally small, recessed button on the very rear of the device or on the bottom, which ought to be held in for a period of 5-10 seconds.

If you are still not able to contact the router afterward, please respond so we may continue to assist you.

Dec 16, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

I can't get DMZ on Westell F90-610015 to work.


NEED TO FIND THE DRIVER FOR WESTELL MODEL 6100F cAN YOU HELP?

Aug 11, 2008 | Westell Wirespeed LiteLine 6100...

2 Answers

DSL modem connected but no internet


Have you installed DSL filters on all your phones and make sure you don't have on on the line for your modem?

Jun 28, 2008 | Westell Wirespeed LiteLine 6100...

1 Answer

I can't get on line


A blinking DSL light means that you have no DSL sync -- you are not receiving a digital signal. You will need to contact your ISP to have them repair your service.

Steps to do first:
1. Powercycle the modem -- unplug the power from the back for 15 secs, plug it back up.
2. Ensure that all phones that share a line with the DSL have filters attached.

Jan 28, 2008 | Westell Wirespeed LiteLine 6100...

1 Answer

Help setting up hwr54g as an access point


Yes there is an easier way! Just setup the router as you would any normal setup. Follow the directions to set it up for the first time. What you want to do is have the put in all of your information that you need for it to communicate with your Modem. This will automatically place the router onto your network. Now the part that I believe you want is for this to be secure! Well setup either a WEP or WPA these are both encryption Protocols that will denie access to anyone other than you or someone you allow to access your network wirelessly.
You do not really have to go through all of the trouble of setting up specifics. As long as the two devices communicate the router and the modem will do the rest. I do this everyday in my daily work day! Anymore quesitons please feel free to ask!

Nov 27, 2007 | Hawking Wireless-G HWR54G (603992506064)...

6 Answers

Can only get dsl if i use landline


Hi, Rob just studied ur problem.Iam a tech which handles this kind of issue. I talk to verizon,at&t,bellsouth,qwest daily for such issues. Well i can suggest u onething u can get the efficient speedstream 4100 series modem which comes with a 1 yr warranty. And also checkout with verizon clearly abt ur distance from the central office.Bcos might be ur dsl circuit may be not technically feasible i:e NTF. For further clarifications plz get back to me.

Jun 07, 2007 | Westell Wirespeed LiteLine 6100...

Not finding what you are looking for?
Westell Wirespeed LiteLine 6100 (B9961001002) Modem Logo

Related Topics:

1,336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westell Wirespeed Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Carlos Soto
Carlos Soto

Level 2 Expert

149 Answers

Are you a Westell Wirespeed Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...