Question about Computers & Internet

1 Answer

The CD-ROM, Run but too slow.

Hi, Dear Expert:
i have a MITSUMI CD-ROM SR 244 W, installed on windows 2000 based computer upgraded to windows XP SP2 installed recentely, the PC is HP VECTRA VL 420 SF, the CD ROM run but it's too slow to start, it reads CD music and sometimes it get corrupted.
the CD-ROM capable to read properly the windows XP CD but it takes 4 hours to install, pretty much the same thing with windows 2000 CD for office programs.
i did install and uninstall the driver, i think i have compatibility issues, and i need someone who have the knowladge to have the computer fixed.
Many Thanks for the one who anticipate.

E-Mail: grajasami1972@yahoo.ca
Tel:(647)-274-4477

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 383 Answers

CD ROM Drives

This site could help ya in need of the drivers .

Hope this fixes the problems you are having .

This could help ya in the way of doing this your self at this site.

Have a great evening.

Posted on Dec 02, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Error code 7


To resolve this issue:
  1. If you are upgrading Windows 98 or Windows Millennium Edition, follow the troubleshooting steps that are described in the following Microsoft Knowledge Base article: 310064 (http://support.microsoft.com/kb/310064/ ) HOW TO: Troubleshoot Windows XP Problems During Installation When You Upgrade from Windows 98 or Windows Me Test to determine if the issue is resolved. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
  2. Perform a clean installation of Windows XP:
    1. Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive.
    2. If Windows automatically detects the CD-ROM, click Install Windows to start the Windows XP Setup Wizard. If Windows does not automatically detect the CD-ROM, click Start, click Run, type CD-ROM drive letter:\setup.exe, and then click OK.
    3. Press ENTER.
    4. Click New Installation, and then click Next.
    5. Follow the instructions on your screen.
  3. When you receive the "Press F6 to load SCSI/Raid Drivers" prompt, press F7 to bypass Advanced Configuration and PowerInterface (ACPI) detection.
  4. Finish the installation of Windows XP.

on Mar 16, 2010 | Computers & Internet

1 Answer

The CD -rom not compatible with windows 8. it works on windows 95


Between Win95 and Windows 8 there are several other versions Win 98, Win 2000, Win XP, Vista, and Windows 7. Try to run the CD in compatibility mode. If it does not work you will have to forgo the use of that software or run it on an old machine, or upgrade to a version compatible with Windows 8 if one such upgrade exists.

Aug 31, 2013 | Expert Software Computers & Internet

1 Answer

Can not install windows xp in my system send error code 7


try this one:

To resolve this issue:
  1. If you are upgrading Windows 98 or Windows Millennium Edition, follow the troubleshooting steps that are described in the following Microsoft Knowledge Base article: 310064 (http://support.microsoft.com/kb/310064/ ) HOW TO: Troubleshoot Windows XP Problems During Installation When You Upgrade from Windows 98 or Windows Me Test to determine if the issue is resolved. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
  2. Perform a clean installation of Windows XP:
    1. Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive.
    2. If Windows automatically detects the CD-ROM, click Install Windows to start the Windows XP Setup Wizard. If Windows does not automatically detect the CD-ROM, click Start, click Run, type CD-ROM drive letter:\setup.exe, and then click OK.
    3. Press ENTER.
    4. Click New Installation, and then click Next.
    5. Follow the instructions on your screen.
  3. When you receive the "Press F6 to load SCSI/Raid Drivers" prompt, press F7 to bypass Advanced Configuration and PowerInterface (ACPI) detection.
  4. Finish the installation of Windows XP.

Mar 13, 2010 | Computers & Internet

1 Answer

Fsx problem


To properly install or upgrade to the MSXML 4.0 SP2 SDK, uninstall the previous version of MSXML 4.0 and then install MSXML 4.0 SP2 and then install the follow : (copy and paste below)

download.microsoft.com/download/9/6/5/9657c01e-107f-409c-baac-7d249561629c/MSXML4SP_RelNote.htm

May 07, 2009 | Computers & Internet

1 Answer

Motherboard and cpu


thanks for the details supplied although I believe you're missing some details

1. are you trying to install the whole operating system (windows xp sp2) or only the SP2 for windows xp?

2. if you are trying to install the os (windows xp sp2) is this a clean installation (recommended) or you are trying to upgrade from a previous operating system (9x, nt, 2000)??

10. are you getting a blue screen with this message?? in what part of your installation??: the DRIVER_IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NON PAGE_AREA message is something I'm assuming you're getting on a blue screen before the computer shuts down on you (please confirm if this is accurate)

2. if you answered yes to the previous question what we need is the line at the bottom portion of the blue screen where you see something like 0x000000?? (0x00000......
if possible get this information and post it here. this information is called a stop error (the blue screen is also called a stop error screen or blue screen of dead (BSOD) as is coloquially known) the code will give you/us a better idea of where the problem lies.. but taking an educated guess you may have driver problem creating some type of issues.

in the mean time my suggestions are the following:

a. while you get and post the information required above is, if you're trying to install the service pack 2 on a working xp installation, is to try to install the SP2 by only having the basic peripherials plugged into your system. (keyboard, mouse and obviously your monitor) and reattempt the sp2 installation.

b. if you're trying to install the operating system (either clean install or not) make sure your windows xp sp2 copy is a good copy (hopefully will be a valid copy of the os) if not you can always run into problems now or at a later time.

c. if you're trying to install the os and want to make sure your system/hardware configuration is appropiate for the installation this are your options:

1. check the HCL online (if you have a previous installation you are trying to upgrade to xp)
http://winqual.microsoft.com/HCL/Default.aspx?m=x
2. if you have a previous windows installation you can also use the upgrade tool to confirm if you have what you need to put windows xp on your system.
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q307726
2. if you have don't have an internet connection you can use the windows xp cd that you have to confirm whether you have what it's required in terms of hardware:
Pop the cd into your CD drive. Close the screen if auto run launches and open Run from the Start Menu. Type in D:winnt32.exe /checkupgradeonly, substituting the drive letter of your CD-ROM for D if it’s different. This will launch the Microsoft Windows Upgrade Advisor that will identify any hardware and software upgrade incompatibilities.

Oct 07, 2008 | Computers & Internet

1 Answer

Mitsumi cd-rom fx4821t wont work


have you installed any software for compiling the data and writing it on the disc....
try to use nero and tell if it shows any error

Aug 31, 2008 | Mitsumi (CRMC-FX4821T) (crmcfx4821t)...

1 Answer

HELP ME


hi there my friend,

we have the hard way and then we have the easy way...

the hard way is to bootup with your bootable xp cd .follow the installation guide ..then.put in your key when you get the chance to ..and finish the installation. then apply service pack 2 to your installation .. and you're done...

the easy way would be to make a Slipstream Windows XP Service Pack 2 CD....which you can use each time you need to fix your system.

1 - Download the (full) "Network Install" of the Service Pack (English version [266 MB]), and save it to a directory (folder) on your hard drive (in my case D:\XP-SP2). Other languages can be downloaded from the Microsoft Download Web site.

Note: do not use spaces in the folder name!

2 - copy your Windows XP CD to your hard drive. Just create a folder (I used \XP-CD), and copy all the contents of your Windows XP CD in that folder.

3 - , open a Command Prompt (Start > Run > cmd), and go to the folder where you downloaded SP2 (cd \foldername). Type the command: servicepack filename /integrate:drive/path. In my example the command is WindowsXP-KB835935-SP2-ENU /integrate:D:\XP-CD.

Extract SP2 files

If you get the error:

This service pack can't be integrated error

This is caused by the fact that your Windows XP CD contains updates that will be automatically installed when you run setup. This type of CD's will usually be from larger OEM suppliers (like Dell, HP, or others).

You cannot use this type of CD to create a slipstreamed SP2 install.

First, the files will be extracted, and next they will be integrated in your Windows XP files:

Updating Windows Share

When ready, you should get a confirmation. Windows XP Service Pack 2 has now been Slipstreamed into your original Windows XP files.

Slipstream Completed


Creating a Bootable CD

For this part I used IsoBuster and Nero Burning ROM 6

After you install IsoBuster, you can choose to use only the product's free functionality for what we want to do, IsoBuster will look like the image below (you need to have your original Windows XP CD in the CD-ROM drive).

Start to extract the boot loader from the original Windows XP CD. Using IsoBuster, select the "folder" Bootable CD, and right-click Microsoft Corporation.img. From the menu choose Extract Microsoft Corporation.img, and extract it to the folder on your hard drive where you have your Windows XP files (D:\XP-CD in my case).

Extract Boot Image

Next, start Nero Burning ROM, and choose CD-ROM (Boot) in the New Compilation window. On the Boot tab, select Image file under Source of boot image data, and browse to the location of the Microsoft Corporation.img file. Also enable Expert Settings, choosing No Emulation, and changing the Number of loaded sectors to 4 (otherwise it won't boot!)

Nero Boot Settings

The ISO tab should be configured correctly as shown below:

Nero ISO Settings

If you have an older version of Nero you won't have the option Do Not Add ";1" ISO file version extention under Relax ISO Restrictions. You won't be able to boot your new CD, so update Nero!
You can configure the Label tab to your liking, I would however recommend that you keep the Volume Label the same as on your original Windows XP CD. Here are some (English) Labels:

* Windows XP Professional: WXPCCP_EN
* Windows XP Home: WXHCCP_EN
* Windows XP Professional OEM: WXPOEM_EN
* Windows XP Home OEM: WXHOEM_EN

Nero Label Settings

Next press New, and from the File Browser window, select the files and folders from your slipstreamed location (in my case D:\XP-CD). Now drag & drop the selected files in the ISO1 window.

Copy Files

Next, burn your new CD.

Burn

You now have a Bootable, Slipstreamed Windows XP Service Pack 2 CD!

Apr 28, 2008 | Computers & Internet

9 Answers

Boot cd-rom type:cd-rom/non-emulation booting


No, it's because Microsoft changed the way boot CDs work with SP2. You need an old CD (Windows XP SP1). I had the same problem here, notebook without floppy, it won't boot from the newer XP version CDs (SP2 or SP3) - but an old SP1 CD works!
(Those were all original Microsoft CDs, and the SP2 / SP3 CDs boot just fine on several other PCs I tested. It's just that some old hardware has a problem with the boot mode used on newer Windows CDs.)

Sep 20, 2007 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...