Question about Luminox Navy Seal 8202 Wrist Watch

1 Answer

Luminox 8200 series dive watch date set issue

Hey, I have an 8201 and the date has always been off. I just paid 55 bucks to have them clean and set the date and it's off again (shows November 31 on Dec 1st). How do I set this right? 7 months end in 31. Is there an easy way to get my watch back on track without scrolling through the year?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 55 Answers

This movement has a really quirky thing going on, its one of the few movements that you can actually turn the hor hand to set the day forwards or backwards...so on a day that goes from the 31 to the 1st it will advance fine, if there is no 31 for that month you can turn the hour hand 2 cycles and it will advance through the 34, continue to the 1st and set time...date can also be set by turning the hour hand backwards thru the dates...go ahead it doesnt 'hurt' the movement a bit, its made for this...so in oither wiords, when you get a new cell and the date is lets say the 15th and your watch says its the 2nd, just advance the hour hand through until you hit 15 and yoiu are good to go...hopefuly this help and didnt confuse much...good luck:)

Posted on Nov 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set the correct date for my Luminox watch?? Date changes at random times???


Use this link and browse through my TIPS AND TRICKS: http://www.fixya.com/MyProfile/tips.aspx?usrid=1700524. You will find manual for your watch there.

Apr 26, 2010 | Navy Seal Luminox Dive Watch

1 Answer

Date is always a day behind or early ???


Use this link and browse through my TIPS AND TRICKS: http://www.fixya.com/MyProfile/tips.aspx?usrid=1700524. You will find manual for your watch there.

Apr 26, 2010 | Luminox 3007 Original Navy Seal Diver...

1 Answer

Need help setting chronograph on Luminox 8101 dive watch ( functions of dials & setting back to zero).


pull the crown out and use the top and bottom buttons to zero out. when pull the crown out each position set a differnt dial

Oct 08, 2009 | Luminox Navy Seal 8101 Wrist Watch

1 Answer

How to set the date on luminox 3600 series watch


it has a screw-down crown, you have to turn it counterclockwise until it pops looses slightly, then you can pull the crown and set time...dont forget to push and rescrew it down to case to keep it water tight :)

Jul 09, 2009 | Luminox 3007 Original Navy Seal Diver...

2 Answers

Missing piece to Luminox 3000 black rubber watch band`


Try parsecent.com they can get the part or a substitute part, the keeper is not sold separately tho, you would have to buy a complete band...good luck :)

Mar 18, 2009 | Luminox Navy Seal Dive 3001 Wrist Watch

1 Answer

Luminox bezel


Grab the knurled edge of the bezel and turn counter clockwise. It only moves in one direction- to the left, counter clockwise.

Mar 14, 2009 | Luminox Navy SEAL Dive 3901 Wrist Watch

1 Answer

3903 Blue Faced Seal Dive watch Bezel


best bet is to contact luminox...i had to do it for mine. Even if it was a purchase from a third party, they may take care of it for free...

Aug 21, 2008 | Luminox Navy SEAL Dive 3901 Wrist Watch

1 Answer

Luminox 3100 series stops working at night


Sounds like there could be a bit of foreign material floating about inside, or the new battery was not up to scratch. Take it back for checking.

May 29, 2008 | Luminox Navy Seal Dive 3001 Wrist Watch

2 Answers

Set the date


If you dial in the date before noon make sure you stop winding the crown right after the date flips. That will give the internal mechanism the most room to cycle and not flip at noon. If you are setting it after noon wind the crown just until the date you want starts to move to the following date, but stop immediately after so as to not flip over. That way the mechanism will be close to changing the date and should flip it at midnight. Make sense? Hopefully, good luck.

Aug 10, 2007 | Luminox Navy SEAL Dive 3103 Wrist Watch

Not finding what you are looking for?
Luminox Navy Seal 8202 Wrist Watch Logo

Related Topics:

742 people viewed this question

Ask a Question

Usually answered in minutes!

Top Luminox Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Dennis Fitzsimmons

Level 1 Expert

28 Answers

ibewjm

Level 2 Expert

58 Answers

Are you a Luminox Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...