Question about Linksys BEFW11S4 Wireless-B Broadband Router (12503024)

1 Answer

Please help I have a Linksys router.I just got new DSL service with ATT .The DSL is a to Ihook the system up now.Which wires go where? The computer already has the LInksys on it from berore?

Posted by on

  • Betty6ix Dec 02, 2007

    please help



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 173 Answers

To setup your router
first check..
Connect the Broadband modem to the computer using an Ethernet cable without the router installed and make sure that the Internet connection is active. If it is not, contact your Internet Service Provider. If it can go online,
to setup connection..
Step 1:
Connect the Broadband modem to the router’s WAN or Internet port.
Step 2:
Connect the computer to any available numbered port (1, 2, 3 or 4).
NOTE: In this example, we’ll connect the computer to port number 3.
Step 3:
Make sure the power adapter is plugged to an available power outlet.
Step 4:
check if you are able to go online wired..
if not your router has to be configured first,
config your router by running the setup cd and that would fix your problem..
let me no know in case if you have any problems ...

Posted on Dec 05, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My new WRT160N Linksys won't connect ATT Motorola 2210 DSL Modem

For AT&T default IP address for the Motorola modem is
Default for the Linksys IP address is

Have you changed either one? For them to work correctly they need to be in different subnets. An IP Address of 192.168.y.xx, where y is the subnet and a different number for each device, usually 0, 1, or 2.

If they are in the same subnet, change the modem'smag-glass_10x10.gif IP to or Once you do this you will need to use the new address to access the modem.
You should make sure the router'smag-glass_10x10.gif gateway is outside the DHCP rage of the modem.

Dec 06, 2010 | Linksys WRT160N Wireless Router

1 Answer

Unable to connect cable/DSL router with my new att dsl service.

access web interface configuration page user: admin password admin (this is by default). Go to basic settings. look for MAC clone. click this. power cycle modem and router.

Aug 08, 2009 | Linksys EtherFast Cable/DSL Router

2 Answers

I went from a ATT dsl modem to a net gear modem and i cannot get the net ger mode and linksys mode to talk to the computer

Most DSL providers use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections for end-users. To set up a Linksys router, you need to enable PPPoE on the router’s web-based setup page.
To setup a Linksys router with a DSL connection you need to perform four steps:
  1. Verifying Internet Connection
  2. Connecting the Devices Together
  3. Checking the LEDs
  4. Setting-up a DSL ISP on a Linksys Router
Verifying Internet Connection
Connect the Broadband modem to the computer using an Ethernet cable without the router installed and make sure that the Internet connection is active. If not, contact your Internet Service Provider.

Aug 01, 2009 | Linksys Wireless-G Broadband Router

3 Answers

Recently I subscribed ATT DSL Service conflict IP Address

the motorola modem that att is using uses 192.168.1.x subnet. log onto your router and change it to 192.168.b.x where b is any number between 2 and 254 (just not 1). You should also log onto the modem and change the setting that allows it to share the external ip address with the router. You will need to do this if you plan on accessing your network from the internet.

Apr 25, 2009 | Motorola Computers & Internet

2 Answers

Connectin a linksys Befsr41 wired router to a Motorola 2210 modem

do one thing change the ip address of the LAN in the in the router then you get it after that configuration you done right ok

Apr 14, 2009 | Linksys EtherFast Cable/DSL Router

1 Answer

Cannot connect lap top or printer wireless and also connect to the internet via AT&T motorola modem

yes. Here is Linksys' page on how to:

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 12, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Have changed to att may I use linksys modem

Yes, you can still use the Linksys router with your ATT dsl modem. Could you provide me with the model or brand of your ATT dsl modem so I could provide you with the steps on how to setup your router?

Feb 27, 2009 | Linksys EtherFast Cable Modem with USB and...

1 Answer

How to add a netgear wgr614 router to dsl modem

The NETGEAR router needs to be configured. Call NETGEAR. Try this also

Jan 05, 2009 | NetGear WGR614 Router

1 Answer

Cannot connect with ATT modem

Connect your pc to the ATT box. If online, check the ip address of the computer. If the ip address is 192.168.1.x, then you just have to change the router ip address. The wrt54g ip is, it may be having conflict with the ATT modem. Change the wrt54g ip to

Good Luck

Mar 05, 2008 | Linksys Wireless-G WRT54G Router

3 Answers

Wireless network broken, access to WRT54G & Motorola 2210-02 via http.. denied

I have att yahoo dsl which I installed about a year ago. The process required bridging the ADSL Modem (in my case a speedstream 4100) and accepting dynamic IP addresses and configuring PPPoE on the WAN side of my Linksys router. The ATT support person walked me through the entire process over the phone even though I was comfortable with making the Linksys configuration changes as I had to do the same in China without technical support. The modem configuration was no more difficult than the router configuration as it was performed from a web browser too. The biggest warning was that to reverse the modem change (if desired) required use of a reset button because the web interface was disabled as a result of the configuration change. My advice to you especially if you are willing to attach the Linksys router to the telco modem is to contact the ATT highspeed DSL support line and see if they will walk you through it like they walked me through it. Reviewing your Linksys User's Guide and understanding the configuration of that device would probably be appreciated by the ATT Support person as well as assuring you can access the Linksys router to configure it during the call.

Dec 08, 2007 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides