Question about Computers & Internet

3 Answers

PC beeping, monitor will not display

My pc when turned on beeps 6 times, then the monitor will not display. The light sequence is AC green and BD yellow. Now I tried removing a memory stick after blowing the dust from the fan area. It came on then when I rebooted it, it is doing it again.Now when I press the power butoon it makes a noise takes abt 15seconds then powers on with the beeping. Can you please help me?

Posted by on

  • 3 more comments 
  • MsTiki Dec 02, 2007

    I tried that and its still giving that beeping noise. Is there anything else to try?

  • TimH Dec 14, 2007

    Computer worked fine last night, discovered it this morning still turned on but no signal to monitor. Rebooted and it began a consistent beeping with no signal to monitor. Unplugged several times to no avail. Help??????

  • Anonymous Sep 04, 2008

    PC beeping, monitor will not display

  • Anonymous Jan 27, 2009

    beep monitor no display

  • Anonymous Feb 03, 2009

×

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 209 Answers

We have different sound we can hear in cases of hardware problem, once the video card has loose contact it also beep continously, a beep sound also occurs when the ram(memory card) loose contact, one beep sound when it boot clearly it proceeds as go signal going to operating system. if you are using an upgraded video card remove temporarily and use the on-board from your motherboard. in case that it won't boot and still you hear a beep, beep ,sound then, switch-off the power take out the memory card clean the contact points(bronze color) with pencil eraser, make sure that no remaining residues of eraser remained before you install to the slot. i hope that this solves your problem

Posted on Dec 01, 2007

Ad

I had the same problem, as in the computer beeps and nothing else happens. I just took off the ram stick and put it into another slot. Now it works just fine. I'm not sure if that particular slot got some problem suddenly.

Posted on Mar 13, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Loud beeping noise is your hard drive replug the connectors

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The tower turns on but does not boot the monitor


There could be a problem with the connection to your monitor.

Dec 21, 2013 | Gateway ATXSTF MNT Pro S P4 1500 Tower...

1 Answer

I shipped my gateway to the philippines and had been using it until I had to leave. It has sat idle for 2 1/2 years. When i returned I brought new parts to upgrade, harddrive, memory, and a new windows xp...


Hello sir hi, try cleaning the memory modules of your PC. also review your power supply connection. and check the following sequence of events. 1. power on the PC. 2. fan should be blowing. 3. keyboard light, scroll, numlock and capslock lit and then goes off. (if this does not lit, you have a mother board problem) 4. you should hear a beep. (1 beep is normal, 1 long and 2or3 short beeps, means display problem) 5. the numlock is lit. (no light means problem on the motherboard) 6. the display monitor will now display the CMOS. 7. your drive should turn/spin or HD led lights.
Im not so sure if the motherboard develops errors due to being not used for a long time, and may now have slimes and battery leaks that may be present on the board, a visual inspection is needed here, remove your motherboard out of the case and inspect all area for chemical creeps.

Nov 20, 2010 | Gateway Tabor 3 (4000532) Motherboard

1 Answer

My monitor won't show the display even though it is turned on


There may be problem in Monitor or VGA Card. When you Turn on PC the Monitor light is green after 10 second if It will be orange . It means your monitor is alright . but problem in you VGA Card. When the PC turn on there is any beep. If no beep then your RAM is alright. Problem in VGA Card.

Mar 21, 2010 | Sony SDM-HS75P/S 17" LCD Monitor

1 Answer

When I start the system is not video display


There may be problem in Monitor or VGA Card. When you Turn on PC the Monitor light is green after 10 second if It will be orange . It means your monitor is alright . but problem in you VGA Card. When the PC turn on there is any beep. If no beep then your RAM is alright. Problem in VGA Card.

Mar 20, 2010 | Biostar G41-M7 Motherboard - Socket 775,...

1 Answer

Display problem


There may be problem in Monitor or VGA Card. When you Turn on PC the Monitor light is green after 10 second if It will be orange . It means your monitor is alright . but problem in you VGA Card.
  • When the PC turn on there is any beep.
  • If no beep then your RAM is alright.
  • Problem in VGA Card.
Intel Motherboard Drivers

Mar 17, 2010 | Intel 845GEBV2 Motherboard

1 Answer

There is no display in tbe monitor as well as cpu, what may be issue??


There may be problem in Monitor or VGA Card. When you Turn on PC the Monitor light is green after 10 second if It will be orange . It means your monitor is alright . but problem in you VGA Card.
  • When the PC turn on there is any beep.
  • If no beep then your RAM is alright.
  • Problem in VGA Card.

Mar 17, 2010 | HP Compaq dx2200 PC Desktop

1 Answer

My monitor is not displaying anything. other things are working fine but the screen is not displayed.i lost my driver cd so downloaded the driver software for this card from the net. it showed me a blue...


There may be problem in Monitor or VGA Card. When you Turn on PC the Monitor light is green after 10 second if It will be orange . It means your monitor is alright . but problem in you VGA Card. When the PC turn on there is any beep. If no beep then your RAM is alright. Problem in VGA Card.

Feb 20, 2010 | Computers & Internet

1 Answer

My hp computer wont display picture and makes a beep noise when i turn it on


It should make one beep. That means it passed the self-test.
If there is nothing on the monitor (is the monitor light green or yellow?)
then the monitor is bad.
I suggest you try another monitor to be sure. Borrow one from a friend.

Dec 10, 2009 | HP Pavilion 512n PC Desktop

2 Answers

Solid amber power light


Your Monitor is not connected properly
http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

Connecting Your Monitor
1. Turn off your computer and unplug the power cord.
2. Connect the white connector end of the DVI cable attached on the monitor to the connectors on the computer.
3. Connect the USB cable that was included with your monitor to the computer and the upstream USB connector on the monitor. Once this cable is connected to the computer and the monitor, you can use the USB downstream on the monitor.
4. Connect any USB devices.
5. Connect the power cord.
6. Turn on your monitor and computer. If you do not see an image, see Troubleshooting Your Monitor.

NOTE: The Monitor will display full screen in White, Black, Red, Green and Blue color rolling pattern on screen if the DVI cable is not connected. This self test pattern will be displayed continually when Monitor detects that DVI cable from Monitor to PC is not connected.


* Check connection integrity at both ends of the video cable.
* Ensure the monitor and computer are plugged in to a working electrical outlet.
* Ensure power button is depressed fully.

Aug 14, 2008 | Computers & Internet

2 Answers

Dimension 4500S


hi!,
I hav a solution 4 u . Ur LCD monitor's wires of ur Laptop Has gone loose , U can just give ur lappy 4 a servicing.
byeee........

Mar 08, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

3,102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...