Question about Remote Controls

3 Answers

Olevia 242T television

We just bought a new TV (see subject line) and we can't find a 5 digit code that works when trying to program our Comcast cable remote. The box is a DVR 3 Device and the remote programming only lists 5 digit codes. The three listed for Olevia LCD TVs (11144,11240 and 11331) don't work. Also, a forum I was reading suggested 11610 but that doesn't work either. Any suggestions?! Thanks in advance,

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Olevia 242T television

The code you want is 11610. Buy a remote that can accept this code.

Posted on Apr 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Olevia 242T television

So i tried pushing the cable button twice after putting in the code and it did shut off my television. The problem is I still cannot control volume. Can you help with this?

Posted on Dec 05, 2007

Re: Olevia 242T television

Try This You will need the DVR-3 remote to do this. There are three codes to try, but I found 11331 worked on my particular model. The other codes are 11144,11240. Turn TV on, aim the remote at your cable box, hit tv, then hold setup button until TV button blinks, then put in the code and the cable button will blink. You should be good to go. If the power does not
shut off when you hit the power button, push cable button twice and then power and it should be okay.

Posted on Dec 04, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I program a comcast xfinity remote for a Dynex tv

Hello there
From this page,

I used the first type of remote and I got

  1. Turn on the TV you are programming.
  2. Press and release the "TV" button on your Universal remote.
  3. Press and hold the "Setup" button on your remote until the button blinks twice.
  4. Type in the 5-digit code using the number buttons. Most likely code
    11463 Others to try
  5. If the code is correct, you will get 2 blinks. If the code is incorrect, you will get one long blink.
  6. Use the Universal remote to operate your TV (use Power, VOL, etc..)
  7. If these steps don't work, look for another code and repeat the above.

Sep 20, 2014 | Samsung TV Remote Control

2 Answers


Hello, you will need the model number for your remote control unit, once you get it, you can go directly to the RCA website and click under accessories, You will get instructions on how to download the code list. ,

Nov 03, 2010 | RCA Universal Remote Control

1 Answer

I have an AKAI LCT2715 and the codes Comcast gave

I recently bought a used LCT2060 that had no remote. I figured my comcast cable remote would work without a problem but it didn't. So 3 universal remotes later I found my solution...a radio shack2_bing.gif universal gamer remote. It controls up to 5 components plus your xbox360, playstation and pc. The price on sale was a mere 12.97, not bad if you ask me. Hope this helped. The code that worked for the Akai2_bing.gif was 11676. Take care...

Dec 23, 2009 | RCA 244889 Remote Control

1 Answer

Need a remote code for the Olevia TV for the Comcast remote

the remote control code for DirecTV with Olevia 242T or 237T (37' or 42') model is 11610. this code will power on/off and volume up/down the buttons on directv remote.
Or buy the Olevia RC-LRN remote control. go to - accessories - remotes.

Jul 09, 2009 | GE JASRM24912 Remote Control

2 Answers

Remote code for nexus television

The only ones I can find are 0463 10463 and 720. If these don't work you could try the auto find method below. As the remote appears to only accept 3 digit codes I'd try 463 and 720. These are known to work on dtv and comcast for this model.

STEP1 Turn on the Component you want to
program (TV, VCR, DVD or AUX).

STEP2 Press the [COMPONENT] button (TV,
DVD or AUX) to be programmed and
[OK/SEL] button simultaneously for 3
seconds. The Component LED will light
for 30 seconds indicating the unit is
ready to be programmed.

STEP3 Point the remote toward the
Component and press the [CHup] or
[CHdn] button one step at a time or
keep it pressed. The remote will emit a
series of ON/OFF commands. Release
the [CHup] or [CHdn] button as soon as
the Component turns Off

STEP4 Test functions. (Same as for 3-Digit Code
Programming Method - Section A). If any
of the functions do not work as they
should, repeat from STEP 3 using [CHup]
or [CHdn] buttons to find the correct code.

STEP5 Save the code.

Feb 04, 2009 | Uniden Remote Controls

3 Answers

Sharp TV (LC52D64U) remote control Comcast cable (DVR) box ?

I had the same problem with my remote. I would enter the code and there would be no response from the remote. I looked up the manual for the other comcast remote and the codes are 5 digits instead of 4. Try codes 10093 or 11602. The reason why there is no response from your remote is because it is waiting for you to enter the last digit of the code. Hope this helps.

Dec 01, 2008 | Sharp Remote Control

2 Answers

Olevia Remote Control Codes

I think you are out of luck. None of the universal remotes recognize Olevia tvs. The manufacturer claims its because they are too new.

Sep 28, 2008 | GE JASRM24912 Remote Control

8 Answers

Program Comcast remote to operate Samsung 46"LCD

Not sure which remote you're using. We have comcast Motorolla box and Samsung LN-T4671F. the code I used was 10812 and it works perfectly.

Go here for more and check the comcast section:

May 18, 2008 | Samsung TV Remote Control

1 Answer

Olevia 32 inch monitor with direct tv box

the remote control code for DirecTV with Olevia 242T or 237T (37' or 42') model is 11610. this code will power on/off and volume up/down the buttons on directv remote.
Or buy the Olevia RC-LRN remote control. go to - accessories - remotes.

Dec 25, 2007 | Directed 434MHZ Remote Control

3 Answers

Olevia 232t remote code

Go to Best Buy and buy the DirectTV Universal Remote Control Model RC64 ($20). It will control both the Satellite Receiver and the Olevia TV (Everything on the Olevia except the A-B-C-D Guide buttons). The Remote Control User Guide lists the control codes, four for the Olevia. The codes are:

Satellite Receiver: 00392

Olevia 235-T12: 11610 (last of the four codes listed for Olevia)


Nick from Ft Myers

Dec 21, 2007 | Directed 434MHZ Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

1,181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66404 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4719 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides