Please download APD 3.04 from the epsonexpert website. When installing the driver it will ask you on what operating system you are going to use. Please select windows 2000 instead of xp. You should be good. If not use generic text (if you are using parallel or serial cable).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try printing something that is formatted properly to fit on a receipt roll printer. the Windows test page will always be slow on a receipt roll printer, because it is formatted for 8-1/2" X 11" pritners and contains graphics. I suspect that actual printing will be fine.
Dear Clark, it seems you have a lot of money when you suggest to waste a printer 240€ value. The solution: Link www.epson-pos.com and register, after that, follow this path: Thermal line printers Choose your model Epson Advanced Printer Driver for TM Series (the first option for Windows7) Install it, it Works properly.
First of all go to Control Panel->Add Remove programs. There select this printer and delete it. Disconnect the printer from the PC and reboot.
Now reinstall the drivers of this printer from the CD that came with it.
reboot the PC.
Connect the printer to the PC and allow Windows to detect it and load its drivers. You will get a message in the right bottom corner of the screen "The new HW has been installed and is ready for use". Now start the word processor and go to File->Print. Here select this printer as default printer. And print away.
Remember to reboot when I have said you must.
You can set this up under printer settings - Under Windows XP - At the control panel, click printers, right click the tm-t88iii printer and select properties. Click the 'Device Settings' tab and there *should* be a option to open the cash drawer after printing.