Question about Mercury P4VM800M7 Motherboard

1 Answer

Red and blue power wires

I disconected the red and blue wires that say "power sw" and "power led" from the bottem right hand corner of the motherboard and cant seem to remember exeactly where they go. can you help me?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 209 Answers
Re: red and blue power wires

You can see this markings in the mother board if you have manual you can also this

Posted on Dec 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What colors are the wires for the pwr sw, smi,rst,hdd led,grn led and where so i plug them in at s7sen 15-a01-013010 rev 3.0a

- the colors of the wires (can differ, depends on the case type):
  • Green(+ is the colored wire)-White(-) --> POWER LED (GREEN light)
  • Red-Black -> POWER SWITCH
  • Red-White -> HDD LED (RED light)
  • Blue-White -> RESET
  • Red-Black (4 pins wide)-> SPEAKER


Sep 03, 2010 | EliteGroup K7SEM Motherboard

2 Answers

I cleaned my pc, and disconected the wires that are right downside corner. I cant remember how to put them back rightly. Any help? hdd led power led + power led - power switch (sw) reset switch (sw)

H57H-AM2 v2 Motherboard in a Gateway DX4840 wire connections for Front Panel are shown here in Photo. I took them before I disconnected mine so it works.3_3_2012_12_10_44_pm.jpg3_3_2012_12_10_56_pm.jpg

Jun 15, 2010 | EliteGroup ECS L4VXA2 (CDL4VXA2)...

1 Answer


The hdd red wire gooes to pin #1 the hdd white wire goes to pin #3 the power sw orange wire goes to pin #6 the power sw white wire goes to pin #8 The reset sw blue wire goes to pin #7 the reset sw white wire goes to pin #5 the power led green wire goes to pin #2 the power led white wire goes to pin #4.
Now the layout of the pins is the long row (5) pins are the odd number pins 9 being the odd one and 1 is the other end of the row. 2 through 8 start at the pin accross from 1 : : : : . I hope this helps you.

Aug 22, 2009 | PC Chips MB PCCHIPS SiS746FX M848A V5.0...

1 Answer

Motherboard installation

Just download manual and check configurations:

May 16, 2009 | Motherboards

1 Answer

MSI MS6511 jumpers overview?

Dear User here is confiruration.
1.Orange with + sign and orange is for HDD LED.
2. Green with +Sign and Green is for Power LED.
3.Red is for Power switch.
4. Blue of Black is for Reset switch

Mar 29, 2009 | Motherboards

1 Answer

Connecting startup leads to ABIT NF7 motherboard

Below is a link to the manual for this motherboard, It should be able to show you where each of the leads on your dislocated panel wires go to.

Hope this helps

Nov 20, 2008 | Abit Motherboards

5 Answers

Gigabyte GA-8INXP Motherboard Problem- front connector pins

If the wires from the reset switch is white/blue the blue wire is positive, Hdd red/white red is positive power Green/white Green is positive etc. The wires on the speaker connector will be red/black/black/white - red is positive. The colored wire is always positive. On all GA mb's the positive connection is always towards the back of the MB and are marked with a + on the base of the pin as you can see on the photo. Hope this help.

Sep 19, 2008 | Gigabyte GA-8INXP Motherboard

Not finding what you are looking for?
Mercury P4VM800M7 Motherboard Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Roshan Rijal
Roshan Rijal

Level 2 Expert

361 Answers

Are you a Mercury Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides