Question about Washing Machines

1 Answer

I hate washing machines

I have a whirlpool Duet front loader 9250 series It was recently moved to my new house and now rocks the entire house in the spin cycle. The laundry is really piling up around here... four teenagers + friends! I have leveled it many times, with a level etc. It is on solid surface, poured concrete w/tile overlay. Could something have happened to it in the move? Any advice would at least keep my busy trying to fix it!

HELP! I am drowning in laundry

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 164 Answers
Re: I hate washing machines

Check the suspension system. I am not familiar with this particular achine, but front loaders in general must have the straps put back on the tub when moved. if the unit recieved and hard drops or bumps it could have ruined/damaged the suspension causing it rock out of control. The suspension could be springs/ and or shocks, like a car

Posted on Dec 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why does it beep through the entire. Wash cycle. No code showing.

Whirlpool Duet GHW9150P Front Load Washer Beeping ... > ... > Whirlpool Duet GHW9150P Front Load Washer
Question about Whirlpool duet Washing Machines ... my front loader is not workingwhirlpool washer flashes and beeps will not finish a cycle 1 Beep/E10--Error: Water... It beeps through the wash and rinse cycle every couple of minutes. ... Cycle signal which tells you that the cycle is complete beeps through the entire cycle.

[PDF]front-loading automatic washer use and care ... - Whirlpool

Translate this page Whirlpool Home AppliancesWash. This is the main portion of the wash cycle. You will see the washer tumble the load. ... Spin cycle. If the laundry is still wet, take half of the load out of the washer and try again. .... Using recommended AFFRESH® washer cleaner, add.


Translate this page Whirlpool Home AppliancesThe first cycle using the sensor will run longer to calibrate the optical sensor. Rinse Aid. Using rinse aid will optimize your drying and wash performance. This dishwasher is ...... laundry detergent, hand soap, or dish detergent for hand washing .... models) you will experience more starts and stops throughout the entire cycle.

Continuous Beeping - Whirlpool Duet Sport Washer - The ... > ... > The Laundry Appliance Repair Forum

Jan 25, 2016 | Whirlpool Washing Machines

1 Answer

Ytek.netwe just moved into a house with a duet washing machine- a few years old. when we do a normal clean cycle, it doesnt appear there is that much water getting used. How much water should we see thru...

All front loaders use very little water as a opposed to a top loader that uses up to 45 gallons per load a front loader uses about 10,plus a front loader cleans clothes very well with that minimal water usage.
The major question is do the clothes seem to come out clean when you have used that washer?

Aug 20, 2011 | Whirlpool Washing Machines

1 Answer

How do I change the door gasket on a Whirlpool Duet washing machine model WFW8300SW03 I have the new part

The following link explains step-by-step how to replace the door bellow on a Whirlpool Duet series front loader:

If you have any questions about this repair, please post back and let me know. I hope this helps you.

NOTE: You can view helpful exploded view diagrams of your washer at for assistance as well.

Apr 22, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Duet Vibrates the whole house on the spin cycle. it has started this only when we recently moved.

The key statement that you made was the fact that you recently moved. Some questions you may ask yourself:

Where was your washer installed in your old home as compared to where it is installed now?

Did you re-level the feet after you moved the washer?

Did any of the shock mounts come dislodged during the move?

Is the flooring in your new home substantial enough to handle the weight and spinning action of a front loader?

The following link can give you some things to consider when trying to figure out what may be causing excessive vibration:

You may not like hearing some of this, but I can assure you, I have dealt with this problem numerous times. In the majority of cases, substantial flooring was causing the problem.

Read through the link provided and let me know if you have any questions. I hope you find the information helpful in some way.

Mar 04, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool duet washer, inner stainless drum rubs

This sounds like a worn bearing housing or the bearing itself has packed up,either way you would have to strip and check these and replace what is broken

Dec 28, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F3 error on whirlpool duet front loader

The Heater has a internal short circuit.

Short circuit of Heater to Ground.
Measure insulating resistance of heater between contact and housing
(norm. 2 M?).
Replace heater.
Perform test program.

Nov 11, 2009 | Whirlpool Washing Machines

1 Answer

Whirlpool Duet Front Loader won't get up to spin speed

Careful of overloading the front-loading washers. Too much of this will result in the bearings in the drum to go bad. When this happens, the rpms on the drum slow down due to belt slack. You can only see this with the back off of the unit and in the middle of the cycle. They do not sell replacement'll have to buy the whole drum (bearings pressed inside) and for 1/2 the cost of a new washer. I hate front-loaders. I'll never buy one again.

May 20, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Sounds like rocks in my front loading washing machine

did you try removingthe lower acess panel and checkin g the drain pump for possible obstruction??

Mar 12, 2009 | Whirlpool Duet GHW9150P Front Load Washer

4 Answers

Service manual

Whirlpool GHW9150P front loader washer keeps stopping mid cycle witht he F06 code. I can get through an entire cycle if there are only two or three items in the washer. My thought is it needs a new motor drive. would you agree?

Apr 04, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides