Question about Kenwood VR-405 Receiver

2 Answers

Kenwood VR-405 I have a kenwood receiver and I recently updated to HD TV and programming. When i switch channels between HD and regular channels the sound goes crazy. Scratchy & loud. Any ideas?

Posted by on

  • simas Jul 22, 2008

    That would be nice, I Have a 52" HP TV and Best Buy came out and installed about 100 monster cables, NO HDMI. I do have optical from the receiver to the direct tv receiver. It is in snug.

  • ballardchad Nov 08, 2008

    Exact Same problem. I tried everything. I now have a new problem when I switched to a new Optical Cable. The power goes off of the amp and the red power light starts blinking fast!! The HD Chanels are fine, but when I switch between the standard Devinition chanels the sound goes nuts...

×

Ad

2 Answers

Vr-405 does not have a digital decoder, so the digital signal is what you're hearing

Posted on Oct 14, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

More info would be nice. If you're using optical, make sure its securely in both the tv and your vr-405 receiver. I have owned the vr-405 since 2000 and i just purchased a sony 32xbr6. HDMI into the TV, optical out to the receiver, it sounds amazing!

Posted on Jul 22, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenwood Auto video surround receiver DR / 409 how to reset it


PDF]KRF-V8030D VR-409 - Kenwood

manual.kenwood.com/files/B60-4593-00.pdf
VR-409. INSTRUCTION MANUAL. KENWOOD CORPORATION. B60-4593-00 (EN) ...on the country and sales area. AUDIO VIDEO SURROUND RECEIVER ...

Kenwood VR-409 Manuals

www.manualslib.com > Brands > Kenwood Manuals > Stereo Receiver
View online or download Kenwood VR-409 Instruction Manual. ... Kenwood Instruction Manual Audio Video Surround Receiver KRF-V8030D VR-409.

Kenwood VR-409 Receiver Repair Questions, Solutions ...

www.fixya.com > Forum > Audio & Video Receivers > Kenwood
Recent Kenwood VR-409 Receiver questions, problems & answers. Free expert DIY tips, support, troubleshooting help & repair advice for all Audio & Video ...

Kenwood VR-409 PDF Owner's Manual Download & Preview

www.manualguru.com > Kenwood Manuals > VR-409

Feb 03, 2016 | Kenwood Audio Players & Recorders

1 Answer

Need the 4 digit code for a kenwood vr-405 reciever with my kenwood rc-ro509 remote..stop working?


Hi,
Here are some remote codes for Kenwood Receivers.
The codes are as follows: One of them should work
0027, 0077, 0313, 0186, 0314, 0356

Here is a link to a web site that has universal codes for remotes.
http://www.hifi-remote.com/ofa/codes-amp.shtml#amp

Hope this helps,
Best Regards,
Mark

Jan 27, 2011 | Kenwood VR-405 Receiver

1 Answer

I have a Kenwood vr-405 and for the most part it works. I have been noticing that one front speaker is quite a bit louder than any other speaker. I have tried to adjust it many times and it seems like...


Maybe you should first isolate the problem to the receiver or the speaker by swapping the front speakers with each other to see if the loudness stays with the channel of the speaker.

Or, the acoustics of the room just make that speaker seem louder at the listening position. Try taming it with the adjustments provided in the receiver.

The manual can be found at http://www.retrevo.com/s/Kenwood-VR-405-Receivers-review-manual/id/480ag202/t/1-2/

Aug 18, 2010 | Kenwood VR-405 Receiver

1 Answer

How to hook up a kenwood audio-video surround receiver vr-405 to a 46" Bravia tv?


hello all you need is a good pair of RCA cables.

Use the audio output on the TV
run it to the VIDEO 1 input on the receiver


as for your DVD player vcr etc you can either run them directly to the tv as it will output whatever sound is playing to the receiver.

or

use the receiver as a video switcher and connect your components directly to it.

remember your receiver will need to be set to the input you use. ie: video 1 / dvd etc..

Hope that helps

Jan 10, 2010 | Kenwood VR-405 Receiver

1 Answer

How do i get dolby digital to work on my kenwood vr0405 reciever?


Make sure your source is playing something that has been recorded in dolby digital, not all dvd's and tv boxes transmit dolby digital. what is your source?

Dan

Dec 27, 2009 | Kenwood VR-405 Receiver

1 Answer

Reear speakers not putting out sound


If the TV sound source is through stereo RCA cables you'll only get rear sound if you choose one of the DSP modes. A digital source might work as expected, IF you have things correctly set up for multi-channel.

Dec 26, 2009 | Kenwood VR-405 Receiver

1 Answer

Does kenwood VR-405 play DTS-HD Master


I have the 405 and a Samsung 3600 which has onboard DTS Master/ Dolby True HD. Out of the 6 movies I 've watched, only 2 have given me Dolby Digital. Bottom line: If the movie doesn't have DD, you cant get DD on the 405. I thought just about all blu rays had DD but its not so. Its time for us to upgrade!

Oct 24, 2009 | Kenwood VR-405 Receiver

2 Answers

I need the remote control code for a kenwood vr405


i need you 4 digits for the kenwood vr 405

Jul 11, 2009 | Kenwood VR-405 Receiver

1 Answer

Kenwood vr-405 receiver


I have the 405 as well. My TV has an optical out and I run that straight to the 405 optical input. I set the input selector to DVD/CD (not DVD)and presto! TV audio out my speakers. It all comes down to the audio connections on your TV.

Mar 23, 2009 | Kenwood VR-405 Receiver

Not finding what you are looking for?
Kenwood VR-405 Receiver Logo

Related Topics:

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5487 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Don Hart

Level 2 Expert

108 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...