Question about Computers & Internet

3 Answers

Emachines 3090 keyboard

Im having so much trouble right now i want to find out if my laptop will support another ram but can find out how to remove the keyboard i seriously need help. i was wondering if anyone would know about the above system and could tell me how to remove the keyboard, or if they know whether it will support another ram under the keyboard??? i currently have 1gb running hom premium. i started with 512mb, 40gb and home basic. i now have 120gb, 1gb and home premium. 1gb is still not enough, i am getting 2gb ram but it would be good to keep my 1gb and stick that in as well. does anyone know also where i can get the cheapest 250gb 2.5 sata hard drive??? i have found one for £72 i would like to know if i can get it cheaper??

thank you so much if you can help

Posted by on


3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 58 Answers
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer


Posted on Apr 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a emachines keyboard modle 9021. I was working with the keyboard and all of a sudden I lost my audio. I played with the buttons but I get no sound at all. If anyone has an answer to this problem, It will be great to have audio again.


Posted on Mar 08, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to install ram memory on e644g-0663 laptop

Up to 8GB of DDR3 Sdram ram memory that is SO-DIMM for laptops, and 1066MHz.

That is PC2-8500 that is SO-DIMM

An example,

There are TWO Ram Memory slots. EACH one has a maximum amount of 4GB.
Total Maximum Amount of Ram Memory is 8GB.

IF, just one Ram Memory module ('Stick'), is to be used, it is placed in ram memory Slot 1. (DIMM 1)

(The Processor reads what is in Slot 1 first. Cannot have ram memory in Slot 2, and not Slot 1 also )

No that's okay Acer/Gateway/eMachines!

I have access to the SERVICE MANUAL, bahahahaha! Your lack of info doesn't bother us...........

This is a PDF file. Scroll the page down using the scroll bar all the way to the right, until the top header of the PDF file reader shows.

To the immediate right of the number 216 at the top, is the Page Down Arrow.
To the left of the number 216 is the page number box.
The PDF reader page numbers do Not match the actual manual's pages.

Put your mouse cursor in the page number box.
Backspace the 1 out.
Left-click once.
Type -> 95
Press the Enter key on your keyboard.

(In the Top header is also the controls for view size.
To the left of the page number box is a Slider that is a blue 'Dot'.
Left-click on the blue 'Dot', hold the left mouse button down, and drag it to the left to Decrease the view size.
To the right to Increase view size )

Under the bold subheading - Prerequisite, click on the blue -
Base Door removal

Bottom of laptop facing you, open Battery Compartment to the Top, away from you, the Base Door is at the bottom.
Rectangular cover that has two Philips screws holding it on.

One screw at the Top/Middle, one screw at the Bottom/Middle.
Remove these two screws, do not lose them. (Double-sided sticky tape to table, and stick the screws to the tape )

BEFORE beginning;
Remove ALL power. Remove the AC adapter (Charger), and Battery.

To go on;
This is a general example of a laptop SO-DIMM ram memory module,

Note the Locating Notch on the bottom, and the two Side Notches on either side.

The Locating Notch at the bottom, lines up with a Locating Lug in the bottom of the ram memory slot.
For this reason it can ONLY be installed in one direction.

There are spring clips that 'snap' into the Side Notch/es.
The top of one spring clip is eased to the outside of the laptop.
Now ease the other spring clip to the outside.

Once both spring clips are freed from the Side Notches, the ram memory module should pop up a little.

(Sometimes you have to keep one spring clip, held out with one hand, and with the other hand move the other spring clip out )

Remove the Ram Memory module, at almost the SAME angle as it is now. Slightly tilted.

DO NOT bring the Ram Memory module straight up, or you will damage the gold plated contact pins of the Ram Memory module, and also the contact pins down in the ram memory slot.

Notice how ram memory in Slot 1, (Slot A), is on top of the ram memory module in Slot 2. (Slot B)
If you have two ram memory modules installed, you have to remove the top ram memory module, first. (Slot A)

Again, if you are just going to use ONE ram memory module, it goes in Slot 1 (Slot A)

Look at the ram memory slot, and the Locating Lug in the bottom, and/or observe which way the Locating Notch on the ram memory module was, before you took it out.

Line the ram memory module up with the Locating Lug.
Install it at the same angle roughly, that you took it out at.

Once in the correct position the spring clips 'bumps', will snap down into the Side Notches, of the ram memory module.
(Click / Click)

Reinstall the Base Door.
Reinstall the Battery.
Attach the AC adapter (Charger), and plug the AC adapter into power.

(ALWAYS plug into the laptop FIRST, then plug into power. Otherwise a power surge could happen, and burn out electronic components in the power section of the motherboard)

WAIT 1 minute, turn the laptop on. BIOS will recognize the ram memory. You're done.

For additional questions please post in a Comment.


Oct 22, 2012 | eMachines Computers & Internet

2 Answers

Where dom i insert new memmory in a dell latitude d820 computer?

1. Remove the keyboard bezel with a flathead screwdriver.
2. Remove three screws securing the keyboard
3. Unplug the keyboard cable from the motherboard and remove the keyboard. The internal RAM (memory) slot is located under the keyboard, right above the touch pad buttons.

-How to remove keyboard ( with pictures ) -

Aug 21, 2011 | Computers & Internet

3 Answers

Is there any manual to remove the eMachines 350 keyboard? Any video or something... thanx in advanced.

You can copy the method explained here to replace the keyboard of an eMachines 250:
In your case, the method is the same as explained there.

Feb 07, 2011 | Acer eMachines 350-2074 Netbook

1 Answer

I need to know how to change a emachine e440-1680 laptop keyboard.

Should be able to remove the shroud of the top of the keyboard (the long piece right infront of the monitor) with a screwdriver. Once that is removed there should be 2 screws revealed. Remove these scres and slide the keyboard towards the monitor and pull up. There should be a data ribbon connected, disconnect that and you have the keyboard out. Attach the new data ribbon from the new keyboard, slide it into place, put the scres in, reattach the shroud and your done! it's actually pretty easy.

Feb 04, 2011 | Computers & Internet

2 Answers

How do i change add ram in a toshiba laptop satellite a25-s279 . I don't see on the bottom where to the ram would be?

It's easy to make the old ram-switch-a-roo if there is no trap-door access on the bottom. expose the top of the keyboard by gently removing the trim cover that's in the way (you may see notches on either end to aide in prying up). Remove the 3 screws - there's a bracket on the center one - take note how it goes. Warning - the keyboard is tethered by a ribbon strip/cable - you'll see it underneath the keyboard - leave it attached - it may be a big hassle to put back the right way! Gently lay the keyboard upside down (you may have to remove the protective cover (one screw) over the ribbon). you'll see the memory on the left. lift the plastic shield back and carefully see how to unseat the stick (there is a clamp/arm on each end) then plug-in and then snap-in the new one - it's notched so it can only go in one way. If you do everything GENTLY and can remember the steps you took so you can put the thing back together, you should be OK. You just saved yourself a nice little pile of cash.

Dec 18, 2009 | Toshiba Satellite A25-S2792 Notebook

1 Answer

I replaced installed additional RAM in my eMachine T4510 but it wouldn't complete POST. Removed the new RAM and re-installed the factory-original RAM and it still wouldn't complete POST. Removed all RAM...

In your motherboard there will be a CMOS battery remove that battery and put it again you will get the display in your monitor, the battery will be in coin size the battery is CR2032.

Oct 18, 2009 | E-Machines eMachines Refurbished EMA...

1 Answer

E-System 3090 UK Laptop 512 MB DDRII 533 Ram.To enter the boot when pressing F2 or F12 I have to enter a password ( which i know ) But i want to sell my lap top so i need to remove the password and enter...

You should be able to remove the password within the BIOS. You sure you're going to be able to sell that laptop, because it looks like it's at least 5 years behind?

Jul 08, 2009 | Sony Computers & Internet

1 Answer

II need to upgrade the memory, and this means taking the laptop to peices. can someone please post a how to for this, thanks

The other slot is located under the keyboard on the top of the motherboard - not under. There may be screws on the bottom that secure the panel above the keyboard. Remove the panel and you will see the screws securing the keyboard. If you are careful, you may not have to disconnect the keyboard connector.

May 24, 2009 | eMachines M5116 Keyboard

2 Answers

Installing RAM to Maxdata ECO 3100x

The ram is sited under the keyboard, to remove undo case screws on underneath of laptop. Then, where the keyboard bottom edge meets the laptop case yo will find 3 lugs... which can be pushed in. Lift off keyboard, then undo access panel on right side of laptop. There you will see the 2 memory slots.

Aug 24, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides