Question about Euro-Pro Shark 60 - 384

1 Answer

Set bobbin to thread

Need diagram on how to do this, do not have manual for Euro Pro Shark 384

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Set bobbin to thread - Euro-Pro Shark 60 - 384 Sewing Machines

Where do i purchase this item?

Posted on Dec 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I asked earlier but didn't say what I have . I have a Euro Pro X model 384 and my Bobbin keeps tangling up . What do I do to solve this issue . Thank you

Nearly always incorrect threading or misplaced bobbin. Sometimes just a little lubrication. They used to supply a bottle of oil way back when.

Your manual is here.

Aug 12, 2015 | Sewing Machines

1 Answer

What do I set for straight stitch on the shark euro-pro 384

It should automatically be set on straight stitch when it is switched on. Which means the needle is in the centre. (Hope this wasn't the reason you were given it.)
You can try Manuals on line as Euro Pro is hard to get hold of.

Sep 14, 2014 | Euro-Pro Shark 60 - 384

1 Answer

My machine was working fine until i rewond my bobbin put back in machine started to sew seem to work fine i checked stich and it didnt have any thread in fabric

Check your manual. Make sure the bobbin is not in upside down. Most bobbins must be put in with the thread pulling from one side or the other. If you put it in upside down.... strange things happen.

Feb 05, 2011 | Euro-Pro Shark 60 - 384

1 Answer

After i insert the bobbin case and turn the handwheel the needle wont pick up the bobbin thread

is the thread going acrossed the top of the bobbin friction brings the thread up

Jan 18, 2011 | Euro-Pro Shark 60 - 384

1 Answer

Cant pull the thread up through the bobbin.

Try a new needle,remember flat side faces to the rear of the machine, if you need a copy of your manual, email me at and I will send it to you for free.

Jan 09, 2011 | Euro-Pro Shark 60 - 384

1 Answer

Zigzag stitch pulling tight, looks wrong

Try adusting the bobbin thread instead of the top. Always make sure to insert the bobbin so the thread is pulling in a clock wise direction. Both threads top and bobbin should have about the same resitance when pulled.

May 08, 2009 | Euro-Pro Shark 60 - 384

1 Answer

Hi my name is rubie perry. i purchased a euro-pro shark 60- 384 last year. i decided to open it up and attempt to use it but there's no manual in it. can you please tell how i can obtain a manual??????? ...

I have a brand new sewing machine and the needle does not move up and down when I press the pedal. I already check to se if it was set up to wind a bobbin, because sometimes that is it, however no it isn't. Is there a special switch that I don't see?

Sep 02, 2008 | Euro-Pro Shark 60 - 384

1 Answer

I have euro pro x 384

Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} all machines thread the same. TTN tension, take up, needle.
Beginning with the spool, guide the thread through the thread guides to the tension assembly. Pull the thread through the tension assembly and test it to make sure the tension is working correctly.
(To do this test, adjust your tension setting to normal or medium or 5 or something in the middle. Raise the presser foot and pull the thread through the tension. It should pull easily!! Lower the presser foot and pull the thread. It should pull noticeably harder.) If it passes this test, continue up through the take up lever,then down through the thread guides to the needle. Make sure your needle is fully inserted and turned the correct way.( If you load your bobbin case from the left side,the needle rule is normally FLAT to the RIGHT is RIGHT. There are some exceptions. If you have a newer style drop in bobbin or your bobbin case loads in the front then the rule is FLAT to the BACK.


Aug 24, 2008 | Euro-Pro Shark 60 - 384

Not finding what you are looking for?
Euro-Pro Shark 60 - 384 Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers


Level 3 Expert

18257 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides