Question about JVC AV-48WP30 48" Rear Projection Television

1 Answer

RED is Dropping picture

Red is out of wack

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

Hi, by out of whack I`m assuming you mean the color red has shifted on letters or peoples faces, outlines of doors etc.? If so your convergence IC`s have failed and will have to be replaced of course, If your very proficient at soldering and un-soldering you can attempt this, be advised the board will have to come out of the set, answer back if you have questions.

Posted on Nov 30, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After 5 minutes the picture goes red


That model is famous for having CRT issues. Chances are the Red CRT or one of the CRT drive board is whats causing the issue. Usually if the set shuts down shortly after turning all red then its the CRT. But if it just turns red and keeps working it could be one of the CRT boards dropping out causing the Red to become dominate.

Jun 19, 2012 | Sony KP-57WV700 57" Rear Projection HDTV

1 Answer

Poor quality picture. specifically the red is brown and can't be adjusted. the tv is about 3 years old.


If the picture is replace the lamp. Lamp only affects brightness if the color is wacked replace the light engine.

Mar 26, 2010 | JVC HD-56FN97 56" Television

1 Answer

Philips 43P8341 picture bowed red wont line up


You will need two STK392-120 convergence IC and about six 6.8 ohm 1watt convergence resistors you can get the parts at the following link and they provide free step by step instructions with pics.
http://servicemanuals.vstore.ca/

May 27, 2009 | Philips 43P8341 43" Rear Projection...

1 Answer

Red muti red is out of wack


you can get the DPTV305 - 345 convergence repair kit at the following link which will fix that issue. Its listed under the repair kits category and they send detailed step by step instructions with pictures on how to do the repair. Heres the link.
http://servicemanuals.vstore.ca/

Mar 25, 2009 | Televison & Video

1 Answer

Magnavox rear projection


you will need to replace both convergence ics they are both STK392-120 and you will also need four 6.8 ohm 1 watt convergence resistors. You can get replacement ICs and the resistors at the following link and they provide free instaltion instructions with pictures so you can do the repair yourself.Here is the link.
http://servicemanuals.vstore.ca/

Jul 06, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Convergnce


your convergence ICs need to be replaced very easy and inexspensive repair. I can post a link where you can get replacement ICs and free installation instruction with pictures so you can do the repair yourself.Let me know if you would like the link.

Apr 04, 2008 | Pioneer PRO-200 60" Rear Projection...

1 Answer

Skewed picture


Is it a projection? DLP? LCD? etc... depending on the type the suspicion i have is it is out of focus.  The symptom of writing triplicate comes from the thing being out of wack.. a tech needs to fix it.  all this is assuming ;you have a projection tv of some sort.

Mar 02, 2008 | Samsung PCL545R 54" Rear Projection...

1 Answer

Convergence problem???


you must move red and blue lines into the green. change red to blue by useing the select button on the remote. till all convergance lines are white

Jan 12, 2008 | JVC AV-48WP30 48" Rear Projection...

2 Answers

RED


to do a proper convergence alignment always use your geen as refferance to work from bring the red and blue to the green also find the center of the screen and on the top and bottom to be sure your geen is centered then start/g

Mar 19, 2007 | Samsung PCN5425R 54" Rear Projection...

Not finding what you are looking for?
JVC AV-48WP30 48" Rear Projection Television Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...