Question about IBM ThinkPad A21m 2628 Notebook

1 Answer

The computer turned off, because the battery is low

I don´t have any battery, How cant i skip that protection and up the computer?

Posted by on

  • apolorc Dec 12, 2007

    I have a laptop with a battery problem, and I do not have the battery to replace the one which does not get charge. When I connect the laptop to AC power supply, I receive a message “Critical error, low battery”. There will be a sensor that will fire that error when laptop does not have a good battery (with suitable charge) .

    Do you know if exist any way to cancel that sensor?

    Do you know if exist a way to use the laptop without the battery?

  • apolorc Dec 12, 2007

    I have a laptop with a battery problem, and I do not have the battery to replace the one which does not get charge. When I connect the laptop to AC power supply, I receive a message “Critical error, low battery”. There will be a sensor that will fire that error when laptop does not have a good battery (with suitable charge) .

    Do you know if exist any way to cancel that sensor?

    Do you know if exist a way to use the laptop without the battery?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 324 Answers

Good day to you!
I'm not really understanding your question. If you are asking whether you can use the A/C adapter without the battery in the computer, you certainly should be able to. If that's not what you are asking, could I get you to clarify things with a little more detail?

If you need any additional information, please feel free to ask. If this information has assisted you in the resolution of you problem, please return here to give my assistance an appropriate final rating. If this information has answered your question and/or lead to a resolution, please rate it as "Fixya!".
Thank you, and have a super day!
Ron-

Posted on Nov 30, 2007

  • Ron Roske Dec 12, 2007

    Hmmmmm. Well, first of all, it should run fine without a battery.
    As far as canceling that sensor, I don't think there is anything to be reset or disabled. The system should recognize that the battery is not in the unit and you should not be getting the error message that you are getting.
    Is the battery a NiMH battery? If so, have you tried the deep discharge process. That may recover your battery, at least to some degree. If you have a Lithium Ion battery, a deep discharge will not help.
    Ron-

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My coolpad catalyst battery went to 0% now it won't charge or turn on, or be recognized by my laptop computer


lithium polimer batteries take serious damage from over and undercharge, they prefer to stay within 20 to 80% charge. over and under this causes the battery to wear out quicker. with severe damage a possibility if it is allowed to go too low or too high. most devices cut off the battery before its allowed to drop that low and has protection for overcharge. but if you drain it to 0% then let it sit for a while. it may still go below its safe voltage. i would reccomend trying getting a new battery for it. replacing it is fairly easy


Battery Coolpad Catalyst

Sep 18, 2016 | Audio Players & Recorders

1 Answer

I brought a ipad and they cant remember the icloud pasword or user name so what can i do


You should be able to skip this part. See if you can find a skip button somewhere on the screen, they are usually hard to find because they don' want you to skip. But I'm sure it's in there.

Or you should be able to register one in that page, it's very convenient to have one.

Jan 20, 2015 | Apple Tablets & eReaders

1 Answer

How to install batteries in Onn keyboard.


I don't know which laptop model you are talking about but still you can check back side of your laptop where you find the batter and a singn of lock and unlock.
If it is saying battery low does not mean you need to change the battery, you can connect the laptop charger and charge it again, if only your charger and battery are working.

Aug 06, 2012 | Computers & Internet

1 Answer

When switched on my pc it will display error messaga . That is "error 912 the machine cover has been removed since last system is start up"


This error is displayed if chassis intrusion protection is enabled and the cover is removed.
But as I remember you can bypass this message and start the computer. I don't remember the key, but try Escape or Enter key. (I think the button to skip this error is displayed below the message).
You can also go to BIOS and disabled Chassis intrusion detection.

Sep 05, 2011 | HP Compaq Presario SR2011WM PC Desktop

1 Answer

I have a problem .. I have a mrv t757 amp and it isnt bumping like I used too .. If i keep the volume low all 3 lights are green but once I turn it up it blinks red n yellow n green back andn for in the...


check all your connections to make sure you don't have a short, but most likely it's your amp. If it was the battery it would turn on and off, including radio, then your car wouldn't start(dead battery), but if it does this and your car turns on no problem then it sounds like the amp gave out.

Aug 23, 2011 | Car Audio & Video

2 Answers

My cd player on my computer keeps skipping


LASER CANT FOCUS !YOU CAN TRY TAKING A Q-TIP AND SOME ALCOHOL AND CLEAN IT!

Oct 15, 2009 | HP Pavilion a6700f PC Desktop

2 Answers

1701 A.D. Constant skipping


what is your pc configuration ???
may be the RAM is low or graphic card cant turn it correctly

May 09, 2009 | Aspyr 1701 A.D. for Windows, Mac

1 Answer

How do i make my mp3 player play when hooked up to thw surround sound system?


This is taken out of a manual for the 209.
Is this the MP3 player that comes with unit?
if so then go down this list and see if helps

Troubleshooting (mp3 Player)
The player does not turn on when PLAY button pressed.
• Battery may be inserted incorrectly.
• Battery may be empty.
Skipping tracks or bad sound quality?
• Repeat or random function may be activated.
• There may be strong magnetic fields (e.g. too close to TV) near the unit.
• Low Battery level. Replace with new one.
Cannot perform playback?
• LOCK function may be activated.
• There may be no mp3 tracks in the card or internal memory.
• Memory Card may be damaged.
Cannot playback tracks on the player
• Make sure audio tracks are encoded in the mp3 or Windows Media formats at supported
bitrates.Bitrates support by the player: mp3 – 32 to 320 kbps
• WMA files may be DRM protected and you don’t have the proper rights (license) to play the
files.

Feb 19, 2009 | RCA RTD205 System

1 Answer

Need help!!!


Here's your answer: Songs will skip ...

  • If "Copy protected" option is selected when ripping CD in WMP10 or WMP11.
    • Deselect "Copy protected" options in WMP10 or WMP11 before ripping CD.
How to deselect "Copy protected" options
  1. Run WMP software.
  2. Right click Ripping on the top menu, then select Tools / Options.
  3. Click Rip Music.
  4. Make sure to deselect "Copy protect music".
-Tha Mp3 Doctor

Jun 20, 2008 | Philips GOGEAR SA6045 MP3 Player

8 Answers

My Sansa skips the songs I put on it, what can should I do


I restored settings to default factory settings and has been working and not skipping the songs. Restoring to factory settings does not delete any of your data/songs

-Raj

Nov 27, 2006 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
IBM ThinkPad A21m 2628 Notebook Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...