Question about Philips PM4S Remote Control

1 Answer

I need the codes

I lost the code sheet and need the codes. I need to program it for a panasonic DVD/VCR recorder combination and doing it with the code search feature doesn't work

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers
Re: I need the codes

Here's how:

Turn on the electronic you will programming the code for.
Press and hold the CODE SEARCH button until the red indicator stays on, then release the COE SEARCH button.

Press and RELEASE the desired mode button (TV, VCR, etc.). The red indicator blinks quickly, then stays lit.

Enter the 3 digit code from the code tables.

With the device on, press CHANNEL UP on your remote. If the device responds, no further programming is required.

Panasonic DVD/VCR combo code: 345

Posted on Dec 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Need to find a manual for remote eur7721x10

Since the EUR7721x10 remote shipped with specific Panasonic DVD/VCR units, the manual for the DVD/VCR recorder may give you the information that you need. One of the models is the DMR-E75V. Panasonic has the manual on the product support page: . The direct link to the manual is . The remote buttons are described on page 6; the TV codes are given on page 17. (Note: these codes will probably only work on TVs that are older then the programming in the remote.)

I do not know of any available manuals for the remote that are separate from the DVD/VCR Recorder manual. I hope this helps.

Cindy Wells

Jun 30, 2015 | Panasonic Remote Control EUR7721X10...

1 Answer

Big Button Remote Control

This is because you did not use the right remote code. Try trying different codes and test different functions with your recorder. Try searching on the Pioneer wesbite for remote codes. I would get the codes for you, but I don't have your model number so I can't. You can search for them yourself or comment back informing me of the model.

Hope this helps :)

Jan 25, 2008 | Remote Controls

1 Answer

Lost code for Panasonic T.V.

0286,0280,0284. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
Try this link too

Apr 17, 2014 | Conect It RM700 Universal Remote Control,...

1 Answer

Need codes for a rca remote CRCR4373 to program it for my panasonic vcr/dvd player

Try DVD-3228, VCR-2079 for the Panasonic.
If you need other codes for the RCR4373 try
Please rate this solution. Thanks.

Mar 22, 2010 | RCA 3-Device Universal Remote

4 Answers

Codes to program Innovage Products Jumbo Universtal Remote

Innovage Jumbo remote codes for RCA TV; 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191,194.
Pansonic DVD; 175.
Pansonic VCR; 021, 060, 115, 125, 138, 148, 149.
Philips DVD; 173, 183, 198.
Bell ExpressVu; 168, 187, 194.

Dec 18, 2008 | Remote Controls

3 Answers

Jensen JER321 3-Device Universal Remote

1.Manually turn on the component you want the remote to control.

2.Press and hold the component key (TV, VCR, Etc..) you wish to program. The illuminated ON-OFF key turns and remains on.

3.While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off.

4.After holding down both keys for three seconds, the illuminated ON-OFF key turns back on.

5.Release both keys. The illuminated ON-OFF key remains on.

6.Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each keypress. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks and the next code in the list is sent. This process continues until all of the codes in the Code lists have been searched. If your component turns off, you have found the correct code.

7.Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored.

Jan 26, 2008 | Jensen 143307 Remote Control

1 Answer

Programming Code for a Toshiba dvd/vcr on a Samsung BP59-00048 universal remote control

If you haven't found the manual yet, you can download it from's download center. Just enter your model number or search by product category.

Oct 12, 2007 | Samsung BP59-00016A Remote Control

Not finding what you are looking for?
Philips PM4S Remote Control Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Remote Controls Experts

Ross Keen

Level 3 Expert

1126 Answers


Level 3 Expert

2963 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

59 Answers

Are you a Philips Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides