Question about NEC Dterm DTP 16D-1 Corded Phone

1 Answer

Internal Call "Voice Call" and does not ring

Hi,

I have one phone in a large phone system (Series I Dterm). When you call this phone with the full number (externally dial), it rings fine. If you dial it internally (using just the extension), the calling phone's display says "voice call" and the extension number, but does not ring on either end.

Please help.

Posted by on

  • 1 more comment 
  • Anonymous Mar 16, 2014

    I get the same thing happen when i lift the reciever up then i get an automated voice saying the number i have dialed is unobtaneable

  • Anonymous Mar 17, 2014

    How do I reprogram the 10 speed dial keys on the phone to new phone numbers or internal extensions? Thank You!

  • Anonymous Mar 17, 2014

    No dial tone on SLT extension on Samsung DCS 816 phone system. Phone rings when extn. is dialled but no transmission ??

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 43 Answers

You can toggle each individual phone extension as to whether or not it recieves a "voice" call or a "ring-first" call.

At the extension, press "SPEAKER - 60" it will display the mode. Press the * (asterick) key to toggle between the modes. Then press SPEAKER again to set.

Posted on Feb 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn ringer volume up on NEC Dterm series i? I have tried adjusting while ringing but the LED volume shows up still


You need to lift the handset first then adjust the volume via the large silver round button on bottom right of phone

Feb 27, 2015 | NEC Lands Phones

1 Answer

Trying to call an employees extention and it goes straight to intercom and he cant recieve any incoming calls on a dterm 80 phone


Not too clear on what's happening. Maybe the phone is set to call forward all. Usually CFA code is 41 plus ext. If the user happened to dial 41......, but forgot to dial 9 first for an outside line the phone could be forwarded to the twilight zone. In this case, dial 42 to cancel CFA, problem solved. If do not disturb in on, code 40 is the cancel code. This depends on your codes being at default, if your office codes were changed, say to make room for 400 series extensions, then who knows what will set and cancel CFA or DND. If you want the phone to ring instead of voice announce on internal calls, I'll have look for that later. I know it can be done in programming, but there's probably a code so you can do it yourself.

Apr 14, 2014 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

All extensions ring on oncoming call on NEC Dterm series i


.. I don't have a solution, I need a solution.
NEC Dterm Series I, through internal calls my phone flashes notifying me that I have a call coming through but it doesnt ring. I have tried the volume key ^, that didn't work. Can anyone help me?

Aug 27, 2012 | NEC Dterm DTP-2DT-1 Phone

1 Answer

I need to change a name on a particular internal extension line, but I dont have a code. How do I do it. It's for an NEC Dterm Series i


To change the name I believe you have to go into the voice mailbox for that extension, and change the recorded name.

Mar 07, 2011 | Lands Phones

1 Answer

Voice Mail


It depends on what type of phone system your terminal is running on. On a NEC 2400 IPX and SV8500 for example it's ASYD sys 1 index 140. A 2000 & key system is different.

Mar 22, 2010 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

DTERM SERIES E VOICE MAIL


If its an intergraded VM,, somply dial the main Voicemail number from that phone

Apr 14, 2009 | NEC Dterm DTP-2DT-1 Phone

4 Answers

NEC Dterm 80 calls won't go to voice mail


for us i just found this out.

1.Fwd B/NA
2.1 - 1:set-0:cancel
4.200
5.speaker
after 4 rings it goes to voicemail
this works for us.
i hope it works for others too.

turn this feature off
1.hit fwd b/na
2.0:cancel
3.exit
4.exit
should see the normal display then.

Jul 17, 2008 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

Voice mail not answering


Press speaker, 43, xxx, speaker. "xxx" is the number of your company's message box, if you know that.

Jun 13, 2008 | NEC Dterm DTP 32D-1 Corded Phone

1 Answer

Voice vs ring on intercom


Speaker - "60" - Speaker.

This is the default setting for Voice / Tone toggle.

Feb 26, 2008 | NEC Dterm DTP 16D-1 Corded Phone

Not finding what you are looking for?
NEC Dterm DTP 16D-1 Corded Phone Logo

1,448 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

ray gallant

Level 3 Expert

53430 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...