Question about Zanussi FJS1225W Front Load Washer

3 Answers

Water coming from bottom of machine

On some occasions when the machine is filling it water comes from the bottom of the left hand side of the machine,

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 67 Answers

If this only happens when the machine is filling the hose leading to the top of the tub may be leaking. Before it fills this hose is disconnected from the water supply by a closed solenoid valve. There are two valves which feed into a common hose that comes up to the top of the tub where the water runs into the tub. The leak does not happen after the tub fills because all the water leaks out and no new water runs in. These hoses are usually very small and very inexpensive and held on with clamps. They can usually be replaced by removing a small panel near the hose attachment location.

Posted on Nov 30, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Zanussi Expert
  • 517 Answers

Have you cleaned out your soap dispenser also remove and clean the inside of it ie top and bottom of the in side area

Posted on Oct 20, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check the intake valve on left hand at backside machine or
check the hose connection with intake valve

Posted on Dec 09, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY IS WATER IS LEAKING FROM WASHER?


you just have to pull it out and take back panel off start filling with water and watch and see where it coming from a few rubber hoses under there or water pump.

Jul 30, 2014 | LG WM2016CW Front Load Washer

1 Answer

MACHINE WONT FILL WITH WATERAND THE WATERCHECH LIGHTS UP


Probably jug impellor part number (424099) from espares, buyspares or bosch direct.
No fix unfortunately, this problem manifests as unit starts to fill and motor does not switch on. Eventually the unit overfills and the pump and fill start to alternate and check water light comes on. If this is the fault then this part is the solution it runs in line with the inlet valve and side fill chamber, take the left side panel off (looking from the front) it is tucked away behind the hoses bottom left. Check water light can also come on if the unit is not pumping, if this is the case, repost and I will try and talk you through clearing this fault.

Feb 20, 2013 | Bosch Dishwashers

1 Answer

Water is frozen in fill cup inside the ice maker


Put your frozen food in a cold place.Unplug the fridge, leave the freezer door open for 12 hours. Dont mess with hair dryers

Jan 30, 2013 | GE GSS25LGM Side by Side Refrigerator

1 Answer

Kenmore 665-15522, drained for winter and this spring, water coming out on inside left of dishwasher, is this a freeze plug of some sort, can it be replaced or fixed.


are you saying that the water is filling all the time,if so you have a bad water valve on the left hand side of the d/w behind the bottom panel,when you start the d/w the water fills on the left side but if it's filling on it's own water is weeping through the valve,change it out

Apr 03, 2010 | Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

LG condenser dryer, TD-C70040E. Empty water warning every 3mins!


Did you repair this problem? If yes, how?
Thank you.

Dec 11, 2009 | LG Dryers

1 Answer

E1 error code


Fault is 1E- this indicates a water inlet error.
To access test mode: press and hold Normal+Eco, and press Power. Release buttons. Then press Start(display n:01).Press Start again (display shows water level frequency-not important). Press Start again-(display n:03-motor will be running). Press Start again (display n:04-drain pump will run). Press Start again (display n:05-inlet valve will come on and machine should fill with water). You have now tested major components are working-if you keep pressing start you will scroll thru and test other functions, like heater, dispensor etc, but not needed for your fault.
If Machine didn't fill with water in test mode, you probably have a faulty inlet valve (test resistence should be approx 3.7-4 k ohm).
If inlet valve has tested OK ie machine filled with water in test mode then:
Disconnect from power.
Remove side panels (need to remove top, and bottom front panel to then be able to remove sides)
- Check no water in base of machine-water in base will indicate machine has leaked and activated the safety device which shuts off inlet valve.
- If OK, you probably have a faulty flow meter(measures water intake). Located left hand side of machine, large plastic compartment, which has a sensor at the bottom with 3 wires (red,white,black) that go up to control board. Replace entire flow meter assy-relatively inexpensive part.
- If you still have problem, then control board is faulty, but in my experience it is much more likely to be flow meter

Aug 05, 2009 | LG Dishwashers

1 Answer

Machin fills with water,washes and then fills again


hotpoint wma turn off the power and you are looking for the presure w
switch and chamber , the switch is at the back of the soap draw by the valves on the left hand side there should be a hose going into it take it off and blow through it if nothing happens pull the machine out and at the bottom of the back there is a white plastic cover take it off look for the sump hose and on the side of it there is a whit plastic tube this is the presure chamber clean it out might be blocked

Jun 27, 2009 | Hotpoint WMA64 Front Load Washer

1 Answer

Fill tank


ok on the bottom left side( from the front) is a magnet in the water tank. Sometimes that gets stuck and the sensor wants you to fill.
it can also be that the machine needs to be primed

Mar 27, 2008 | Saeco Vienna De Luxe Espresso Machine

2 Answers

Washing machine doesn't respond to the low, medium or high water settings and keeps filling. Spin and drain cycle works. Won't stop filling and doesn't go into the wash cycle.


My GE WSM2780DAWW stack set dryer and washer was encountering the same problem (water kept filling up not stopping). I saw this page, but the SOLUTION described didn't really draw a picture for me.

Here's how I fixed the leaking washer. Sitting in front of the washer I removed two small screws on the bottom left and right of the front panel. Then sliding the front panel DOWN, it comes off. This allows a view into the machine. Around the LEFT side of the wash basin you will find a white tube. This tube is about the diameter of a pencil. My tube was not attached, and when the wash basin filled up past the point where it should stop, water came out. Reaching around the side of the wash basin with my left hand I could feel where the white tube was supposed to connect properly. Then I attached the white tube. This fixed the problem.

I left the front panel off for a day to make sure it didn't continue to leak and also for the area to dry out.

Jun 17, 2006 | GE WSM2780DWW Unitized Spacemaker Washer...

Not finding what you are looking for?
Zanussi FJS1225W Front Load Washer Logo

430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...