Question about Lands Phones

2 Answers

BellSouth caller ID -- CI-26

I need to know the power supply voltage for this product. I kept the
sheet, but in our last clean-up, my wife found it and trashed it.

I just need to know the input DC voltage.

Chuck

Posted by on

  • Anonymous May 31, 2008

    There are 6 AA batteries connected in series so that = 6 volts.

  • MAMA77 Oct 07, 2008

    I HAVE THE SAME PROBLEM. I HAVE TO HOOK A FILTER FOR MY INTERNET AND WE DONT WANT OUR CALLER ID ERASED. SO WE NEED A POWER CORD AND DONT KNOW WHICH ONE TO GET. HELP!!

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Um. No, 6 AA batteries does NOT equal 6 Volts.

This is elementary arithmetic, folks.

6 batteries × 1.5 Volts each = 9 Volts total.

Posted on Nov 24, 2008

  • tgi007 Nov 24, 2008

    On the other hand, I just dug out my BellSouth CI-26, and it uses 4 AAA batteries (NOT 6), so the voltage is, indeed, 6 Volts.



    4 batteries × 1.5 Volts each = 6 Volts.



×

Ad

There are 6 AA batteries connected in series so that = 6 volts.

Posted on May 31, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bellsouth CI-43 Owner's Manual


For the CI-43 only :
Online manual - website looks like I traveled back to 1995 but it works:
http://users.javanet.com/u/s/use/caller_id_ci43.htm

May 10, 2014 | BellSouth BELL SOUTH CI-36 Caller ID with...

1 Answer

How bellsouth caller id ci 43 contrast adjustments?


If the display is too light or too dark, you should adjust the contrast of the display.
Press either review button until NO CALL or the number of calls displays. Press and hold the READ button approximately 5 seconds until the display reads CONTRAST followed by a number. Release the READ button and use the review up and review down buttons to change the contrast number. When you are finished, press READ again.


From:http://users.javanet.com/u/s/use/caller_id_ci43.htm

Apr 26, 2014 | Canon Office Equipment & Supplies

1 Answer

The phones have caller id and it works except not in the call waiting. How to I activate the call waiting-caller id?


You'll need to call your phone company. (Qwest, BellSouth, SBC, it depends on where you live)

Call Waiting ID (or CID-on-Call-Waiting) is a separate feature, possibly with an extra monthly charge, but possibly it just needs a free activation

Jun 10, 2010 | Uniden DCT646-2 Cordless Phone

2 Answers

Is there on-line manuals I can download for the Bell South CI-36 caller ID unit?


hi,
i recommend you to the website and download the manual.
thanks for using our website.

Jun 05, 2010 | BellSouth BELL SOUTH CI-36 Caller ID with...

1 Answer

I cannot find the ac cable for my d100 camcorder. can I get a ne


Missing Camera-Charger cable:
I had this problem, many places don't have the connector to even make one. The camera requires the full voltage from this wire to download video. But, I found the 99cent store had a CIDCO caller ID unit that used a power supply with the same size connector on the power supply. so... $2 and cut the two connectors off and twisted the ends together and voila.. problem solved. Camera to battery charger worked. The battery must be in the charger for some reason, but the camara connects. It dosen't light up during this proscess though, and it took almost a minute to do it.

The Caller Id is actually pretty good. so reconnect the wires back and you'll have $2 worth of caller ID. ( service must be active from your service provider ), but every telephone can have a display.

Apr 07, 2009 | Panasonic VDR-D100 DVD Camcorder

1 Answer

Alarm messes phone system


It sounds like your alarm is picking up the phone. How many rings before it picks up?

Mar 18, 2009 | BellSouth BELL SOUTH CI-36 Caller ID with...

3 Answers

Uniden CXA15198 not showing caller id


Hi! There is a small device available in the market which is a converter. By connecting this between landline and phone, caller ID start display simply.

It cost to me Rs.450/- made by Fintel. Try to get it cheaper at your place.

Try this and the problem is solved.

Nrupesh

Apr 08, 2008 | Uniden CXA15198 Twin Corded/Cordless Phone

2 Answers

Caller ID


First off seven to nine you do not use an external cid unit for norstar systems. Make sure you have a caller id card in the main ksu or key service unit( the phone cabinet) It should say CI on it. If the card says DS then you do not have a caller id card on the system and will need to exchange it for one. Then the system phones will have to be programmed for cid.

Feb 16, 2008 | NorStar Meridian M7310 Phone

7 Answers

Caller ID is not working in India.


For people who have purchased cordless phone in usa and caller id is not working they should purchase fsk to dtmf converter at any local phone shop and caller id will start working.

Here is the article on various frequency used by various countries for caller id.

Hope this will help you out.

Detailed Product Description

There are 3 major caller ID specifications in the world: DTMF, ETSI FSK and Bellcore FSK. When users buy a foreign telephone devices(such as cordless phone, fax machine or computer telephony interface), may encounter the problems of non-match for caller ID standard. This will cause the device unable to display the caller ID. EX220 can solve this problem easily. This product can receive all 3 kinds of caller ID format, and convert to FSK(Bellcore or ETSI selectable) to match foreign telephone's standard.
EX220 has a rechargeable battery inside the device, during idle status, it gets power from the telephone line and recharge the battery, so no need to use or replace battery. Just plug one end to telephone line, and the other to the telephone device.
For example, if you live in Netherlands, Saudi or India, the caller ID standard is DTMF. You purchased a cordless caller ID phone from US(which uses Bellcore FSK standard), or from Germany(which uses ETSI FSK standard). You won't be able to use the caller ID feature. In this case, just get one EX220 and connect it between the telephone line and the cordless phone, your cordless caller ID phone will display the caller's number immediately.
Remark:
1. Telephone sets for UK and Japan standard are not applicable.
2. In some countries, users must subscribe to Telecom for caller ID service

Feature List
Caller ID Format Conversion --- Convert 3 kinds of caller ID(DTMF, Bellcore FSK or ETSI FSK) to ETSI FSK or Bellcore FSK(selectable)
Date/Time Stamp --- The DTMF caller ID doesn't content date/time stamp. User can set up clock of EX201, so each call will be sent with actual date and time stamp
Area Code Setting --- User can set up the area code, so the dial back feature can easily applied
Rechargeable battery powered by line --- Just connect to the telephone line, the built-in rechargeable battery can get power from the telephone line, no need any external battery nor power supply

News
Now, Multi-Line caller ID converter is available.

Dec 09, 2007 | Motorola Mobility 5.8 GHz Digital Cordless...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

765 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

5575 Answers

Marvin
Marvin

Level 3 Expert

82149 Answers

David Burbee
David Burbee

Level 3 Expert

1871 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...