Question about Cooktops

1 Answer

GE Stove Uneven flame on large center stove top burner(with griddle)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers
Re: GE Stove

Check all holes on burner make sure all air/gas holes are unclogged do not use any ajax or any cleanser that will leave a powdery residue.

Posted on Jan 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I adjust the flame on a MGC5430 gas cooktop? Flames are too yellow and cause black soot on bottom of pans. Doesn't seem to have an air shutter adjustment

Is this unit set up for natural gas or propane? New stoves usually come with ORIFACES for both gasses. They would install between the on/off knob and the burner tube under the stove top. They may be tapped to the under burner area of your stove. If you lift your top stove cover you may find them. If you don't find them, you may need to purchase the correct applications for your stove. GOOD LUCK FRIEND.

Nov 28, 2014 | Maytag MGC5430 Gas Cooktop

1 Answer

Does model XFG371LVQ Whirlpool stove have air adjustment for top burners?

Remove the front panel to find where the gas injectors enter the burner tubes you will see they are cut away and have a screw holding an outer ring which is adjustable, open them up more to get more air in .

May 16, 2014 | Whirlpool Stove / Oven / Range Cooktop -...

1 Answer

Yellow flame

The problem is with the orifice leading to the burner. If it is not centred then you will get yellow flame. Or you are impeding the flow out of the burner and it is not mixing properley. I would pull the burners apart and make sure everything is clear and the orifice is centred.

Apr 14, 2014 | GE Monogram ZGU48N4GHSS / ZGU48L4GHSS...

1 Answer

How do I plug back in the GE stove top burners after unplugging them?

The two leads from the burner fit into a socket in the stove top. It's a bit tricky to get it in just right. If the three metal "legs" on the burner fit snugly into the three slots on the stovetop you did it right.

Aug 26, 2012 | General Electric Ge Stove / Oven / Range...

1 Answer

My ge monogram stove top burner( model zgu366h)continues to ignite. even after the flame is lit

If you are saying the clicking continues you must move the burner knob past the LITE position.
If it continues clicking with the knob past the LITE position the ignitor switch behind the knob is bad.

Nov 30, 2010 | GE Cooktops

2 Answers

Gas stove burner will not turn on

Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work


Apr 29, 2010 | Gaggenau 23 in. KG 260 Gas Cooktop

1 Answer

My electric stove top burner only works on high

This is for the glass top units. well i'm not sure if your problem is with your large or small single burner or the large expandable burner. If it's the large or small single burner replace the burner and if it the expandable also replace the burner. If you have a coil burner replace the infinite switch. Good luck hope this helps you.

Jan 09, 2009 | Jenn-Air JED8430 Electric Cooktop

1 Answer

Thermador Gas Range - Griddle ignition will not spark

I have a Thermador Gas Range PG364GDBS - Oven, 4 burners, and center griddle. All are gas. The four burners and gas oven work fine. The griddle just stopped working, no spark. Turning on the griddle control, the gas valve opens(hear it), gas flows (smell it), but the ignitor will not spark (no loud or faint spark that I can hear). I got a replacement ignition device (mount at the burner) thinking it might be the problem, but still no spark. I checked the AC voltage at the terminal and measured 39 VAC between the terminal and ground. Not sure if that is the correct voltage. Any insights or advice would be great.

Dec 07, 2008 | Thermador SGS36GS Gas Cooktop

1 Answer

Stove-top burners

Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking


Jul 10, 2008 | Belling 27 in. CTC465 Electric Cooktop

Not finding what you are looking for?
Cooktops Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cooktops Experts

Barrett Palumbo
Barrett Palumbo

Level 2 Expert

1772 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers


Level 2 Expert

112 Answers

Are you a Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides