Locking my phone

Hi, there are two options for you to lock your cell phone under "Key Guard Settings", One is the "Automatic Key Guard" where you can set the delay time to lock the phone, and the other one is "Key Guard Code" where you can set a password every time you wish to unlock your phone. I think you have only disabled the Key Guard Code, please try turning OFF the Automatic Key Guard. I hope this helps.

Thanks for using FixYa.

Hi,

Simply press the menu key and ash(*) key and the key pad will lock it self.

Or press the menu key, scroll to setting, press select key, scroll to phone setting, press select key, scroll to key guard setting, press select key, then you can now choose either theautomatic key guard or you want to use your on code.

When using the automatic keyguard, you specify the the seconds you want your phone to stay before being automatically locked up and presss ok.

Regards.

the default code is 12345... try that

Just press the menu key and after that press the * key..
Your phone will be locked..
You can also lock your phone using security code by searching through menu-->settings-->phone settings-->security code..
You can also check the automatic key guard option and select it to automatically lock the keyguard in stand by mode so every time you do not want to lock it manually..
To unlock the key guard do the same by pressing menu and * key..
The default code is 00000 or 12345
If you use a security code you need to give the code to unlock your phone..
Thank you for using fixya..
Please rate me on fixya to continue my future assistance..

How do I change the code that locks my phone?

Press "Menu"
Scroll to Settings, press "Select"
Scroll to Security settings, press "Select"
Scroll to Change access codes, press "Select"
Scroll to Change security code, press "Select"
Enter the current security code, press "OK"
Enter a new security code, press "OK"
Re-enter the new security code, press "OK".

Sir, then enter the lock code instead of the seurity code. Its defalt is in the manual.

Download user guide from:

http://nds1.nokia.com/phones/files/guides/Nokia_3230_UG_en.pdf

Page 163

Formatting the memory card
When a memory card is formatted, all data on the card are permanently lost.
Some memory cards are supplied pre-formatted and others require formatting.
Consult your retailer to find out if you must format the memory card before you
can use it.
• Select Options→ Format mem. card.
Select Yes to confirm. When formatting is complete, enter a name for the
memory card (max. 11 letters or numbers).

Backing up and restoring information
To back up information from your phone’s memory to the memory card, select
Options→ Backup phone mem.
To restore information from the memory card to the phone’s memory, select
Options→ Restore from card.
You can only back up the phone memory and restore it to the same phone.

Locking the memory card
To set a password to lock your memory card to help prevent unauthorised use,
select Options→ Set password.
You are asked to enter and confirm your password. The password can be up to
eight characters long.

Your rating would be most appreciated.

According to the user guide which you can read at the link below, the factory-set USER lock code is 1234. The document also covers lost codes, saying, "If You Forget a Code, PIN, or Password Note: Your phone's 4-digit unlock code is originally set to 1234, and the 6-digit security code is originally set to 000000. Many service providers reset the unlock code to the last 4 digits of your phone number before you receive your phone. If you forget your unlock code, try entering 1234 or the last 4 digits of your phone number. If that does not work, do the following (and shows a graphic of doing...) Press the OK key, then the keypad keys to enter your security code (or try the defaults I mentioned above) and press SUBMIT to enter the code. Here is the link to the page I was quoting from. Once you've assured yo ur not a robot, look for the BLUE download button just below that. Best wishes! -Mark
Motorola V325 V323 V323i V325i Manual User Guide

The options for the keyguard can only be accessed from the front screen. If you open up the enV and try to find the option it's not there, so on the front screen go into Settings & Tools, Keyguard.

Answer from:::::::::::::: [VJ]'s
(Firstly coppy all contacts from the phone to SIM card)
1.Switch off the phone.
2. Press and hold the following three buttons:
Green(call answer) button, (*) button, (3) button.
3.Now press the switch on button.
4.Then the message 'Formatting" appears on the screen releas all buttons