Question about Panasonic KX-T7730 Corded Phone

1 Answer

Handset problem..... i have a problem in my kx-t7730....when i hook off handset..there is not any tone...and when i press a sp-phone ..i can hear a tone...and when i recevie a call and hook-off handset i can hear a low ring..and could not answer by a handset.... plz i want a solve

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 146 Answers

Sounds like a faulty handset, plug in another one from somewhere else on the system to compare, then renew. ( handsets often get bumped or dropped )
could also check user manual for secrecy options here is link
http://www.westlakecom.com/KXT7700-User-Guide.pdf

Posted on Jan 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Panasonic KX-T7730, we have a 824 phone system and cordless handsets (kx-tg1711) we cannot make outgoing calls on these handests but can take incoming calls and can transfer calls. how do we programme


  • Locate the program and auto-store button on your telephone. You will be using these to customize many of the features on your KX-T7730. The program button is used to enter or exit programming.

  • 2

    Program your outgoing line preference, i.e., the line you prefer to seize when you go off hook. Press "Program" "1" "1" "store" for no line. Press "Program" "1" "2" "Store" for an idle outside line. Press "Program" "1" "3" "Outside Line Number" "Store" for an assigned outside line. The outside line number will be a single or double-digit number that is set through your phone system.

  • 3

    Program your incoming line preference, i.e., the line you prefer to answer when you go off hook. Press "Program" "2" "1 "Store" for no line. Press "Program "2" "2" "Store" for ringing line. Press "Program" "3" "Outside Line Number" "Store" for an assigned outside line.

  • 4

    Program your flexible CO buttons. These are the inner row of 12 lighted buttons. Your outside lines need to be programmed to these--you can choose any of these 12 buttons in any order. Press "Program" "CO Button" "0" "Outside Line Number" "Store." The outside line number will be a single or double-digit number that is set through your phone system.

  • 5

    Program any other unused flexible CO buttons for an extension number or any frequently dialed phone number. Press "Program" "CO button" "1" "Extension Number" "Store" or "Program" "CO Button" "2" "9 + Phone Number" "Store". A "9" must be entered at the beginning of a phone number to tell your phone system to seize an outside line before dialing, e.g., "9-1-212-555-1234."

  • 6

    Locate the programmable feature buttons (the row of 12 solid buttons on the right). These buttons are basically one-touch buttons that can be set for extension numbers or phone numbers. Press "Program" "(PF) Button" "Extension Number" "Store" or "Program" "(PF) Button" "9 + Phone Number" "Store." Remember to press "Program" again to exit programming.

  • 7

    Locate your "FWD/DND" button. This button is used for setting "Call Forward" or "Do Not Disturb" on your telephone. To set call forwarding, go "off-hook" either by lifting the receiver or pressing speakerphone. Make sure you go to intercom and not an outside line. To forward all calls, go off-hook, press "FWD/DND" "1" "extension number" (the extension number that you wish to forward all your calls to) "#". After you hear a confirmation tone, place the receiver on-hook. The steps to set call forwarding for busy/no answer are the same as above, except you will press "2" in place of "1". To cancel call forwarding, press "0" in place of "1".

  • 8

    Program "Do Not Disturb," which stops your phone from ringing--any callers will just hear a DND tone. To program, go off-hook, press "Program" "4" "#" on-hook, to set. Press "0" instead of "4" to cancel.

  • 9

    Locate the message button--this works in coordination with your message light at the top right of your telephone. If the light is lit, press "message" to hear a message left to you either by another extension or a voice mail system. The message button can only be programmed as a message or one-touch button. To program as a message, press "Program" "Message" "3" "Store." To program as a one-touch, press "Program" "Message" "1" "Extension Number" or "Program" "Message: "2" "9 + phone number."

  • 10

    Return your KX-T7730 to its default settings by pressing "Program" "#" "*" "Store."



  • Read more: How to Program a Panasonic KX T7730 ' eHow.com http://www.ehow.com/how_7159736_program-panasonic-kx-t7730.html#ixzz1eYPzbevZ

    Nov 23, 2011 | Panasonic KX-T7730 Corded Phone

    2 Answers

    How to set speed dial on panasonic kx-t7730


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308/824 system. From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 001 and then SP-PHONE. Enter the system speeddial location ( 00 to 99 ) or just press SP-PHONE again to go to 00.
    3. Enter your line access number ( usually 0 or 9 ) followed by the telephone number you would like to assign for the speeddial.
    4. Press AUTO DIAL / STORE to save your setting.
    5. To go to the next speeddial location press SP-PHONE and follow steps 3 and 4 again.
    6. Press PROGRAM to exit program mode.
    7. To dial the system speeddial from any extesion lift the handset and press * followed by the speeddial location ( example 00 )

    Apr 12, 2010 | Panasonic KX-T7730 Corded Phone

    1 Answer

    How do I change the extention names on KX-T7730?


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system.
    From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 604 and then SP-PHONE. Enter the jack number you wish to change ( 01 is extension 101, 02 is extension 102 etc. ).
    3. Enter the name ( basically the same as texting on a cellphone ). Press AUTO DIAL / STORE to save your change.
    4. To go to the next extension press SP-PHONE. Don’t forget to press AUTO DIAL / STORE to save your change after each name entered.
    5. Press PROGRAM to exit program mode and you are done.

    Mar 23, 2010 | Panasonic KX-T7730 Corded Phone

    1 Answer

    KX-T7730 - Used to have 3 incoming/outgoing lines. Have cut this down to 2(lines 1 and 3). Outgoing calls are automatically selected by line 3, 2, 1. When calling out the second person can't get an outside...


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system.
    From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 400 and then SP-PHONE. Enter the line number you wish to change. ( In your case 2)
    3. Press AUTO ANS / MUTE to change between Connect and Not Connect.
    4. Press AUTO DIAL / STORE to save your changes.
    5. Press PROGRAM to exit program mode and you are done.

    Mar 17, 2010 | Panasonic KX-T7730 Corded Phone

    1 Answer

    Address storage


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308/824 system. From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 001 and then SP-PHONE. Enter the system speeddial location ( 00 to 99 ) or just press SP-PHONE again to go to 00.
    3. Enter your line access number ( usually 0 or 9 ) followed by the telephone number you would like to assign for the speeddial.
    4. Press AUTO DIAL / STORE to save your setting.
    5. To go to the next speeddial location press SP-PHONE and follow steps 3 and 4 again.
    6. Press PROGRAM to exit program mode.
    7. To dial the system speeddial from any extesion lift the handset and press * followed by the speeddial location ( example 00 )

    Mar 07, 2010 | Panasonic KX-T7730 Corded Phone

    1 Answer

    CANNOT ENTER NUMBER INTO AUTODIAL.


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308/824 system. From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 001 and then SP-PHONE. Enter the system speeddial location ( 00 to 99 ) or just press SP-PHONE again to go to 00.
    3. Enter your line access number ( usually 0 or 9 ) followed by the telephone number you would like to assign for the speeddial.
    4. Press AUTO DIAL / STORE to save your setting.
    5. To go to the next speeddial location press SP-PHONE and follow steps 3 and 4 again.
    6. Press PROGRAM to exit program mode.
    7. To dial the system speeddial from any extesion lift the handset and press * followed by the speeddial location ( example 00 )

    Feb 03, 2010 | Panasonic KX-T7730 Corded Phone

    1 Answer

    Speed dailing


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308/824 system. From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 001 and then SP-PHONE. Enter the system speeddial location ( 00 to 99 ) or just press SP-PHONE again to go to 00.
    3. Enter your line access number ( usually 0 or 9 ) followed by the telephone number you would like to assign for the speeddial.
    4. Press AUTO DIAL / STORE to save your setting.
    5. To go to the next speeddial location press SP-PHONE and follow steps 3 and 4 again.
    6. Press PROGRAM to exit program mode.
    7. To dial the system speeddial from any extesion lift the handset and press * followed by the speeddial location ( example 00 )

    Nov 12, 2009 | Panasonic KX-T7730 Corded Phone

    1 Answer

    Cant Change the display name


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system. From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle press PROGRAM * # followed by the system password ( default is 1234). Now press 604 and then SP-PHONE. Enter the jack number you wish to change ( 01 is extension 101, 02 is extension 102 etc. ). Enter the name ( basically the same as texting on a cellphone ). Press AUTO DIAL / STORE to save your change. To go to the next extension press SP-PHONE. Don’t forget to press AUTO DIAL / STORE to save your change after each name entered. Press PROGRAM to exit program mode and you are done.

    Basically, there are 2 ways of programming the date
    and time - the short way and the long way.
    If you are using the KX-T7730 phone on a Panasonic
    KX-Txx 308/824 system:

    SHORT WAY:
    From the Switcboard / Main telephone
    ( ext 101, 10 or 9 ) with the handset on the
    cradle/hook:
    1. Press PROGRAM 0
    2. Enter Date and Time
    ( The format is: yymmdd,
    1 to 7 1=Monday 2=Tuesday etc, hh:mm,
    0 or 1 0=AM 1=PM ) see example
    3. Press AUTO DIAL / STORE to save your changes
    4. Press PROGRAM to exit program mode

    EXAMPLE:
    If the date and time is 3 February 2010 Tuesday 2:15 pm you will enter as follows:
    100203 2 02:15 1

    LONG WAY:
    From the Switcboard / Main telephone ( ext 101, 10 or 9 ) with the handset on the cradle/hook:
    1. Press PROGRAM * # followed by the system
    password ( default is 1234).
    2. Now press 000 and then SP-PHONE.
    Enter the year.
    3. Scroll to the month with the right scroll key
    (located at the right bottom corner of the phone).
    To change the month use the AUTO ANS / MUTE
    button.
    4. Now scroll right again and change the date and
    day.
    To change the day, again use AUTO ANS / MUTE
    5. Scroll right again and the time will appear.
    Set the time.
    To change am/pm scroll to it, and again,
    use the AUTO ANS / MUTE button.
    6. Press PROGRAM to exit program mode and you
    are done.

    Jun 27, 2009 | Panasonic KX-T7730 Corded Phone

    1 Answer

    How do you program a Panasonic KX-T7730?


    I assume that you want to program the extension names.

    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system. From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the hook/cradle press PROGRAM * # followed by the system password ( default is 1234). Now press 604 and then SP-PHONE. Enter the jack number you wish to change ( 01 is extension 101, 02 is extension 102 etc. ). Enter the name ( basically the same as texting on a cellphone ). Press AUTO DIAL / STORE to save your change. To go to the next extension press SP-PHONE. Don’t forget to press AUTO DIAL / STORE to save your change after each name entered. Press PROGRAM to exit program mode and you are done.
    PLEASE rate / vote this answer if it was helpful.
    Thank you.

    May 18, 2009 | Panasonic KX-T7730 Corded Phone

    1 Answer

    For assigning a person name to the extention


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system.
    From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 604 and then SP-PHONE. Enter the jack number you wish to change ( 01 is extension 101, 02 is extension 102 etc. ).
    3. Enter the name ( basically the same as texting on a cellphone ). Press AUTO DIAL / STORE to save your change.
    4. To go to the next extension press SP-PHONE. Don’t forget to press AUTO DIAL / STORE to save your change after each name entered.
    5. Press PROGRAM to exit program mode and you are done.

    Jun 18, 2008 | Panasonic KX-T7730 Corded Phone

    Not finding what you are looking for?
    Panasonic KX-T7730 Corded Phone Logo

    Related Topics:

    147 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Panasonic Lands Phones Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    guyvstewart

    Level 2 Expert

    85 Answers

    john milligan

    Level 3 Expert

    514 Answers

    Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...