5 Network settings
5-52 bizhub C650/C550/C451 (FE3)
Setting up LDAP
Register LDAP servers and specify authentication settings. Settings can be specified for the following.
Setup LDAP screen 1/6
Setup LDAP screen 2/6
Setup LDAP screen 3/6
Setup LDAP screen 4/6
Parameter Description
LDAP Server Name Type in the name of the LDAP server to be registered.
Use the keyboard that appeared in the touch panel to type in the server name (32
characters or less).
Max. Search Results Specify the maximum number of destinations to be displayed after a search. To
change the setting, press the [C] (clear) key, and then use the keypad to type in
the desired setting. (Range: 5 to 1000)
Timeout Specify the maximum wait time for a search operation. To change the setting,
press the [C] (clear) key, and then use the keypad to type in the desired setting.
(Range: 5 to 300 seconds)
Initial Setting for Search Details Specify the initial search conditions for "Name", "E-Mail", "Fax Number", "Last
Name", "First Name", "City", "Company Name" and "Department" in an advanced
search.
Parameter Description
Server Address Specify the address of the LDAP server. Use the keyboard that appears in the
touch panel to type in the address (255 characters or less).
Search Base Specify the search starting point in a hierarchical structure arranged on the LDAP
server. Searches are performed by also including the sub-directories lower than
the starting point that was specified.
Use the keyboard that appears in the touch panel to type in the address (up to 255
characters).
Parameter Description
SSL Setting Select whether or not SSL (data encryption) is used when connecting to an LDAP
server.
When SSL is used, communication information is encrypted.
Port Number Specify the port number for the LDAP server. To change the setting, press the [C]
(clear) key, and then use the keypad to type in the desired port number. (Range: 1
to 65535)
Port Number (SSL) Specify the port number when SSL is used. To change the setting, press the [C]
(clear) key, and then use the keypad to type in the desired port number. (Range: 1
to 65535)
Parameter Description
Authentication Type Select the authentication method used for logging on to the LDAP server.
Anonymous: This authentication method does not require a user name and password.
If "Anonymous" is selected, dynamic authentication is disabled.
Simple: This simple authentication method requires a user name and password.
Be careful since the passwords can be leaked over the network.
Digest-MD5: This authentication method can be used on a typical LDAP server. If
authentication fails using Digest- MD5, the authentication is performed by automatically
switching to CRAM-MD5.
GSS-SPNEGO: This authentication method can be used with Active Directory in
Windows (Kerberos authentication).
NTLM v1 and NTLM v2: These standard user authentication methods can be used
with Windows NT.
They can be used for logging on when sharing files and printers.
bizhub C650/C550/C451 (FE3) 5-53
Network settings 5
Setup LDAP screen 5/6
Setup LDAP screen 6/6
All screens
LDAP screen 6/6.
User Authentication: If a user is logged on to the copier with external server authentication,
the user name used with external server authentication is automatically
entered in the LDAP server logon screen.
Dynamic Authentication: When using the LDAP search function, a user name and
password is requested.
Referral Setting Select whether or not the referral setting is used.
If referral is used, the search base that was specified in the LDAP server settings
searches the upper and lower levels as the starting point.
Parameter Description
Login Name Specify the logon name for connecting to the LDAP server. Use the keyboard that
appears in the touch panel to type in the logon name (255 characters or less).
Password Specify the password for connecting to the LDAP server. Use the keyboard that
appears in the touch panel to type in the password (128 characters or less).
Domain Name Specify the necessary domain name for connecting to the LDAP server. Use the
keyboard that appears in the touch panel to type in the domain name (64 characters
or less).
Parameter Description
Check Connection Touch this button to check the connection to the LDAP server.
Reset All Settings Touch this button to reset all LDAP server settings to the defaults.
If a message appears, requesting confirmation to reset the settings, touch [Yes].
5 Network settings
5-54 bizhub C650/C550/C451 (FE3)
1 Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the administrator
settings screen" on page 4-7.
2 Touch [6 LDAP Settings] in the Network Settings screen.
3 Touch [2 Setting Up LDAP].
The Setup LDAP screen appears.
4 Touch the button to be programmed and where settings are to be specified for the LDAP server.
Setup LDAP screen 1/6 appears.
bizhub C650/C550/C451 (FE3) 5-55
Network settings 5
5 Specify the desired settings.
– To specify the initial search conditions in an advanced search, touch [Initial Setting for Search
Details]. Select a condition and its setting.
– Select the default condition ("OR", "AND", "START" and "END").
– The specified conditions can be changed when a user performs an LDAP search.
6 Touch [Forward ].
Setup LDAP screen 2/6 appears.
7 Specify the desired settings.
– [Check Connection] appears only if "Enabling LDAP" (displayed from the LDAP Setting screen) is
set to "ON" and "Manual Destination Input" (displayed on the Security Details screen) is set to
"Allow".
8 Touch [Forward ].
Setup LDAP screen 3/6 appears.
9 Specify the desired settings.
10 Touch [Forward ].
Setup LDAP screen 4/6 appears.
11 Specify the desired settings.
– Select the authentication method that is used by the LDAP server being used. For details, refer to
the manual for the LDAP server being used.
– If "GSS-SPNEGO" is selected as the authentication method, type in the domain name of Active
Directory.
– Depending on the selected authentication method, a connection check cannot be performed if the
following settings are incorrectly specified in Setup LDAP screen 6/6.
– For "Simple" and "Digest-MD5": Login Name
– For "GSS-SPNEGO": Login Name and Domain Name
12 Touch [Forward ].
Setup LDAP screen 5/6 appears.
13 Specify the desired settings.
bizhub C650/C550/C451 (FE3) 5-57
Network settings 5
14 Touch [Forward ].
Setup LDAP screen 6/6 appears.
15 Specify the desired settings.
16 Touch [OK].
17 Touch [Close], and then touch [Close] in the next screen that appears.
– To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
The LDAP server is registered, and the authentication settings are specified.
×
2,652 views
Usually answered in minutes!
Enabling LDAP Select whether or not a connection is established with the LDAP server and the LDAP function is used. 1 Touch [5 Network Setting] in the Administrator Settings screen. ? For details on displaying the Administrator Settings screen, refer to "Displaying the administrator settings screen" on page 4-7. 2 Touch [6 LDAP Settings] in the Network Settings screen. 3 Touch [1 Enabling LDAP]. The Enabling LDAP screen appears. 4 To use an LDAP server, touch [ON]. 5 Touch [OK]. ? To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to the selected screen without applying the changes to the settings. Use of the LDAP server is specified.
×