Hi. I had the same problem, if you are talking about the top lcd. Follow these instructions just until you learn how to remove the flat cables. Remove all the cables on the right side of the back of the camera, and securely replace the cables in their connectors. I did this and now my lcd works fine. It is caused by a bad electrical connection. Good luck
i have a canon eos 20D and the camera don`t accept 2, 4, 8 GB CF i download the last actualization...
(More)
i have a canon eos 20D and the camera don`t accept 2, 4, 8 GB CF i download the last actualization and the problam is the same can you help me with this problam thanks
I am a camera repairer & getting err 99 on top display in one body,getting err99along with...
(More)
I am a camera repairer & getting err 99 on top display in one body,getting err99along with mirror moves up down continuously.Camerawon'tshuts down until you removes battery from chamber. i have replaced shutter plates in few cameras which solves problems but this seems something different.could you help me
Hi, the on/off switch on my Canon EOS 20D seems to be faulty. It turns on and off okay, but when I...
(More)
Hi, the on/off switch on my Canon EOS 20D seems to be faulty. It turns on and off okay, but when I switch it up to the third setting (to allow the 'wheel' on the back to change some settings) the camera switches off completely. Rather frustrating for someone who wants to be able to use the 'manual' settings! Any clues, or am I going to have to bite the bullet and take it into a service agent? Cheers for any help.
I have a Canon 40D. I get an error 05, the built in flash's auto popup obstructed. How do i resolve...
(More)
I have a Canon 40D. I get an error 05, the built in flash's auto popup obstructed. How do i resolve this?