Question about Hoover U5753-900 WindTunnel Bagless Upright Vacuum

1 Answer

Wind tunnel hoover

It has lost suction

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers
Re: wind tunnel hoover

Do you have suction at the hose end, if you do then it may be clogged at the inlet by the brush roll. Is the filter cartridge clean? If it is clogged and air can't pass thru it, then you will have no or low suction. Might also check the belt to make sure it is turning.

Posted on Jan 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why is my hoover wind tunnel blowing out side filter and not suctioning

Perhaps dirt or hair is stuck or the full canister needs to be emptied, remove blockage and suction should return.

Jul 15, 2014 | Vacuums

1 Answer

Loud rattling noise and no suction

You have something that's been sucked up into the floor cleaning part of the machine... then clogged it off. Be persistent and you should be able to find it and get it out..

Nov 04, 2013 | Hoover Vacuums

1 Answer

My hoover has no suction. How do you unclog the hose?

get an old wire coat hanger and straighten it out and unclog you pipe.adrian,,,,

Jul 07, 2010 | Hoover Company Wind Tunnel U53019 Upright...

1 Answer

How do you change the Hoover wind tunnel belts?

If you turn the vacuum over there will be (4) screws that hold on the base cover for the roller brush. Remove the screws and the cover and you can get to the belt(s). You can get replacement belts here:

Hoover Windtunnel Belts

Nov 18, 2009 | Hoover Company Wind Tunnel U53019 Upright...

1 Answer

Lost suction - Hoover Wind Tunnel S3630

You have a clog. The "bag full" indicator is nothing but a vacuum gauge, and impeding the airflow will cause a false indication of a full bag.
Clear your hoses and the air pathways behind the brushroll, and you will be back in business.


Sep 27, 2008 | Vacuums

1 Answer

No suction on Hoover Wind Tunnel.

Greetings from,

First this is a common problem on ALL bagless vacuum cleaners. Usually it takes longer then 1 day however.

Is there no suction in the suction hose, or is it not suctioning from the floor?

Most people buy a bagless vacuum once, then return to a bagged one after their bad experience, you are not alone!

Please give me the model number to your Hoover, (found on the bottom or the back of the vacuum on a foil label).


Chris Jones

Aug 18, 2008 | Vacuums

1 Answer

I have little suction when using the hose attachment

Check the hose for a blockage. If you remove the hose, if there is suction at the point where the hose hooks to the back of the vac, then the hose is clogged. If no suction there, check filters, make sure they are clean.

May 31, 2008 | Hoover Company Wind Tunnel U53019 Upright...

1 Answer

Problem with vacuum suction in upright position

Move the lever on the front of the machine to "carpet". It won't agitate on floor

Apr 11, 2007 | Hoover Company Wind Tunnel U53019 Upright...

Not finding what you are looking for?
Hoover U5753-900 WindTunnel Bagless Upright Vacuum Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts


Level 3 Expert

18258 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides