Question about Pioneer DEH-P4100

1 Answer

I try to fix my pioneer deh2300, but no sound.....

Can't u explain me why did i have sound on my pioneer.... ?? i try on 3 different cars...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers
Re: i try to fix my pioneer deh2300, but no sound.....

If you have verified that indeed all the wires are connected as to where they are supposed to be connected, pls try:
1. Activating Internal Speaker to ON in the DFS Alarm Function'
2. the brown wire (or whatever color wire it is that is to be attached to a mobile phone) must not be connected to anything;
3. try all sources, AM, FM, CD;
4. check that none of the speaker wires is grounded.

Pls post back for any developments or the lack of it.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Mar 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a pioneer keh-p4250 it turns on and works fine but no sound have tried differant speakers to no avail can any body help

Try checking your speaker wires to make sure there are no nicks or cuts shorting out to ground. If the wires all check out, you may have a bad output ic inside of the deck.

Dec 28, 2014 | Pioneer Car Audio Receivers

1 Answer

Pioneer deh-x36ui. Sound cuts out when turned up

Hello there,

When it cuts out, then if you dont get an 'AMP errror', on the display, then it sounds like your speakers are faulty. Try using a different pair of speakers temporarily to prove if its the Pioneer or the speakers.

If its the Pioneer, then back to base unser Warranty or repair shop.

Sep 15, 2014 | Car Audio Receivers

1 Answer

I have a pioneer deh-p3100ub what should my highs lows and mids be set at when I'm on powerful preset eq and what should the q frequencies be at

Generally, I would say just set them to where they sound the best to you. Different people have different tastes and ideas as to what sounds the best.

Jun 14, 2011 | Pioneer DEH P3100UB Car CD/ MP3 Player

1 Answer

Audio settings for pioneer DEH-P3100UB

The q1w and all that- is a way to fine tune your eq settings: the q means "frequency" the w means wide and the n means narrow. if you choose to boost your lows at 125 hz which is a low midbass the q selection you choose will focus more on the frequencies very close(narow) to that frequency. if you choose a w setting it will spread the boost to frequencies further away(wider) from the center frequency(125hz) Dink around with it and you will notice the way it contours the sound a little. The different numbers associated with the lows mids or highs are the frequencies that you want to boost when you're adjusting your sound-example if you turn up the bass and it starts distorting your speakers = go into settings 2 and change the "lows" Q to a higher frequency(change 80 hz to 125hz) and that way it wont muddy up your sound quite as bad if at all

Jan 15, 2010 | Pioneer DEH-P3100 CD Player

1 Answer

I have a pioneer DEH-p3100 and I dont understand all the different levels and at what HZ to put the low high and mids at. i have (2) 12" kenwood speakers and a 600W alpine amp. I am lost when it comes to...

dude honestly you could get 101 answers for this and 101 oppinions a real person who knows what there talking about will tell you put on a sound cd with high and lows made for sound testing and play with the setting to you get the best sound to your ear every system is different even if i had the same system i would want mind different because of maybe different cars subs facing different way.prted boxes theres just to man it comes down to you having to play with it and use your headunit manual or find a printout for the basic controls so you actuall know what your changing around till you find the best sound

Jan 15, 2010 | Pioneer DEH-P3100 CD Player

1 Answer

I have just been given a Pioneer DEH-P6800MP but I have a Toyota Celica and the stereo fixes into the car in a different way whereby you screw the stereo into 2 side plates as opposed to using a cage. Does...

ACE hardware. They should be #6 x 10mm x 20 or 32. Take the parts with you. If you don't have an ACE, try True Value. Any car audio install bay would have tons as well. Hope this helps

Aug 17, 2009 | Pioneer DEH-P6800MP CD Player

1 Answer

DEH-P360 Won't output to rear channels/Sub

Make sure that the FIE (front image enhancement) is off. If it is on, the rear outputs are muted.

Oct 01, 2008 | Pioneer DEH-P3600 CD Player

1 Answer

Setting clock on my pioneer deh 1400

the radio must be turned off with the ignition key in the on position... then hold the function key for about 3 seconds if it doesnt have the function key try the audio or source button one of them will bring you to a menu, once in that menu use the func key to scroll though options until you see the clock flashing.. use the up down left right keys to adjust these different options...

Feb 21, 2008 | Pioneer DEH-1400 CD Player

Not finding what you are looking for?
Pioneer DEH-P4100 Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xxxxxx xxx

Level 3 Expert

4679 Answers


Level 3 Expert

56631 Answers

Are you a Pioneer Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides