Question about Frigidaire GLTF2940ES Front Load Washer

1 Answer

Frigidaire washing machine model LTF2940E

Washing machine display is flashing E70 error code and leaving load extremely wet.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers
Re: Frigidaire washing machine model LTF2940E

Check your outlet filters, clean out. The machine will not spin if the filter is blocked. Also check your inlet into the machine. Clean screens on both ends of the pipes. Refit carefully.

Posted on Nov 30, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Frigidaire washer LTF7000ESO error code E70

Good Morning Jazy, this is JK. I see that you are receiving an error message E70. The E70 error means that the Main Control Board is not seeing the correct water supply. I would suggest swapping the hot and cold hoses. Hope this helps!

Mar 24, 2014 | Frigidaire Washing Machines

2 Answers

AEG Lavamat 76810 E70 7Beeps Does seem to still work but display shows E70 and 7beeps over and over. Many thanks gary

I Have AEG Lavamat 76810 E70 7 Beeps and Beeps never stops

The water was not hot
I took all the multi-plugs out and put them back in the whole machine ALL CONNECTORS
Now it works fine E70 is gone

Jul 14, 2011 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

Washes starts buzzing and blinking and says e70

The e70 error code comes on when the hot and cold water hoses are reversed or not properly installed.

Feb 21, 2011 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

E70 error code

The main cause for this e70 error is that the hoses would have swapped (hot to cold, cold to hot). It means the washer isn't getting cold water.Try to switch between the hoses. Another possibility is the faucets are not turned on.... Hope this solution will fix your problem for sure.

Mar 30, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Error code E70 on my Frigidaire front loading washer model LTF2940FEO

The hot and cold water hoses were connected wrong to the washer.

Dec 22, 2009 | Frigidaire Washing Machines

1 Answer

The washer is leaving a dark stain on all of my white clothes

the dark stains are caused by mold build up on the boot of the washer, the e70 may be a pump error. you need to wet a cloth with bleach and then wipe of the mold builldup on the boot, this should solve that problem.

Jun 14, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Frigidaire (LTF2940E) Washer starts, stops, starts, stops...

The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.

  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

May 07, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Error Code E70

water fill problem ,,,check fill hose for kink,,,or lost of water pressure,,,you may need to clean inlet vavle screens..onthejob

Dec 20, 2008 | Frigidaire Affinity ATF7000E Front Load...

8 Answers

E70 error

May 15, 2009


I had this exact same problem with my Frigidaire washer (E70) as bubbles100. I called an appliance repairman on 5/14/09 and paid him $60 to tell me my hot and cold water hoses were reversed/not properly installed.

This repairman was the cheapest priced $60 and he would work till he found the problem. I had one appliance repair company wanting to charge me $90 for 30 min and another wanting to charge $120 for 30 min. Hopefully this information can help save the next person some money by trying this first.

Feb 16, 2008 | Frigidaire Affinity ATF7000E Front Load...

9 Answers

E70 error code repeatedly comes up when attempting to start a load and you have to cancel and restart 4-6 times before the load washes; again at the end of a load it will come up with the E70 error and to...

Means you are not getting cold water into unit..Either cold water hose is connected to the wrong hose or cold water faucet is not turned on..You can solve this by connecting hose to cold water faucet and cold water inlet on washer..

Nov 06, 2007 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts


Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides