Question about AOC LM742 17" LCD Monitor
Kindly assist me in unlocking the OSD menu of my AOC LM725 Monitor
Solution #1 really works. thank you.
Posted on Aug 12, 2010
Solution #5 just makes no sense at all. If the people above you said its fixed then why post something so stupid as that (warranty, personnel, can only be done by AOC????????? come on!!! Are you for real here??) Solution #1 fixed my problem right away! Thanks.
Posted on Aug 21, 2009
Solution numer #4 is ultimate.............thankx buddy
Posted on Jun 13, 2009
For my 917Sw 19"w, I just ran into this problem. It was kinda annoying, but after looking around then remembering to look in the instructions, I found I just had to turn off the monitor, then hold the left button as I turned the monitor back on.
Posted on Oct 10, 2008
Except that fiddling with buttons . . . uh . . . works? It's not even a mistake or error. It's a function of the monitor that you can turn off by 'fiddling with the buttons.'
Posted on Mar 13, 2010
Unlocking of OSD in AOC LM725 Monitor?
This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:firstname.lastname@example.org,we sincerely hope we can help you!
you can also check this boards whether suit you:
2202130701P AOC 6201 7978301421 Power Supply Backlight Inverter
Posted on Feb 27, 2015
But what if there's a keyhole on the back of he monitor ?
Posted on Jan 30, 2014
I ran into this problem too, it was holding the menu button down while turning on the monitor that fixed it! All good now!
Posted on Oct 26, 2008
It is not at all a problem related to desktop or video card. It is most certainly a problem within the Monitor itself and will probaly need a change of some IC which can only be done by AOC service personnel (If under warranty) or by other skilled repairmen. No point fiddling with buttons & cords.
Posted on Sep 09, 2008
No, all you need to do is reset the monitor to factory settings. I fixed mine that way.
If your monitor goes off every 3 seconds (like mine did) you have to be fast or siwtch it on/off few times between the steps to get it fixed.
- 1st. unlock the OSD if when you press 'menu' you get the message 'OSD Locked'. To do this switch off the monitor, and press 'menu' while you switch it on again.
- 2nd. Switch it on, press 'menu' and quickly 'press '<' (left) twice and 'menu' twice to get it reset.
- 3rd switch it off and on again and if still goes off after 3/4 secs, try to reset it again.
I reset mine and it is working find. Before it went blank after 3 secs.
I just tried this because I did not understand why if it was a hardware problem I could see the screen for 2/3 seconds and if pressed on/off it came back, it made no sense as a hardware problem.
Posted on Dec 10, 2009
Hi there - I read in another forum to use the left button instead of menu. Give it a try - power off and hold left button while powering on.
I'll cross my fingers for you :)
Posted on Aug 29, 2009
SOURCE: I am trying to change
Posted on Aug 29, 2010
Tips for a great answer:
Nov 01, 2012 | AOC 2036sa 20"TFT LCD Monitor
Aug 25, 2012 | AOC LM742 17" LCD Monitor
Mar 23, 2011 | AOC 912Vwa-1 19" Monitor
Jan 26, 2011 | AOC Monitor
Mar 07, 2010 | AOC LM729 17" LCD Monitor
Jan 13, 2010 | AOC 917Sw 19" LCD Monitor
Dec 03, 2009 | AOC LM729 17" LCD Monitor
21,997 people viewed this question
Usually answered in minutes!