F10 error on kenmore elite electric built in model 790.4907

The Kenmore Elite 790.9505 range is a kitchen appliance designed for cooking and baking. It features a variety of burners, including a powerful 18,000 BTU Turbo Boil burner and a simmer burner for delicate foods. The oven has a large capacity and offers convection cooking for even baking and roasting. The range also includes a number of convenient features, such as a self-cleaning oven, electronic controls, and a built-in timer. Overall, the Kenmore Elite 790.9505 range is a versatile and high-performing appliance that can help make cooking and baking easier and more efficient.

Incorrectly heat treated. Contact them for a warranty replacement.

Have you checked your elements? They could be going bad otherwise your oven control board is going bad and needs to be repaired. The Repair Shack offers a service which can fix this issue of the problem is in fact the Conteol Board. Check your elements first and then give them a call, they will be able to save you some money on the element(s). Otherwise they can help you get the control boards repaired.

On a Kenmore it's:
F10 error code indicates a runaway oven temperature
Check this:
What does the F10 Error code mean on my Kenmore Electric range model...

What does the F10 Error code mean on my Kenmore Electric range model...

I haven't heard of such a thing. You must have cooked it until there was no moisture left in the potato. That would also account for the failure of the oven. It would be the same as no load in the oven.
A thermal protect part is your current problem.

The magnetron may have been damaged, the thermal fuse will shut down the microwave to stop further damage and reset itself in 20 to 30 minutes, since that has not happened I recommend a professional at this point.

yea you can bake sweet potato in it on the pan 30 min. on each side.

it is the bake relay sticking--on the eletronic oven control board.i tried to buy the relays but,no luck.must buy the eoc board-great engineering

Take a flat head screw driver and gently pretty the door. The temp decreases fairly rapidly and then the lock is disabled. Good luck!

F10 on Kenmore ovens means Runaway temperature error, it means that the probe sensor detected overheating.

Stop the oven and allow cooling for one hour or so, with the power cord unplugged.

If error is still there, then you will need to call the technician and have parts below checked and eventually replaced.


http://www3.sears.com/imaging/ImageP...&titleID=00003


Part#316217001

About the turkey, see if you can borrow one of your neighbour's oven to finish cooking, or leave it half baked and put it back into the oven if the oven restart after cooling up. Remember that you will need to add some more time to the total cooking time, as the turkey will get cold inside.

Good luck