Question about Samsung Standard (CRT) Televisions

1 Answer

Operator manual for Samsung TV Model CI-14F1TS

Operator manual to change channels to VHF from UHF

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Operator manual for Samsung TV Model CI-14F1TS - Samsung Standard (CRT) Televisions

I can only get channels 2 through 14.

Posted on Mar 31, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Okay, here I am again, wanting to know how to add cable channels to my Hitachi C21 F800S TV. It currently only shows one channel, BET. Please help! Thanks!

1 Press menu button to enter the menu screens for the following optional adjustable settings.choose
3-AUTO SEARCH (Activate to auto search & preset receivable broadcast stations)

-if it don't work change this
4Press menu button to enter the menu screens for the following optional adjustable settings.choose
6-BAND (change the band system for tuning (i.e. VHF-L,VHF-H or UHF).

if VHF-L don't work try VHF-H or UHF and restart all over

good luck

Oct 05, 2014 | Standard (CRT) Televisions

2 Answers

I can't program my tv to regular antenna channels

You can program to regular (analog) antenna channels. To do so you must use the original remote which has a TV/DTV switch in the top right corner of the remote. Choose the appropriate mode for the type of channel you want to see or scan for. Here is a link to the owners manual and a picture of the remote swithc. The info on the signal switching is on pg.13.


Oct 27, 2010 | Durabrand DWT1304 13" TV

1 Answer

I can't get FOX on my converter box--what is the channel # for FOX?

It could be your antenna. Some retailers sold consumers UHF-only outdoor antennas and not VHF/UHF combo antennas. Other outdoor antennas may not have a power boost included for the VHF antennas (rabbit ears). The new DTV signals from stations are now broadcasting in lower power signals than before June 12.

Outdoor Antenna

KMSP/FOX 9 and KARE 11 both broadcast on VHF signals. WCCO and KSTP broadcast on UHF signals. You will need a VHF/UHF outdoor antenna to pick up KMSP and KARE 11 and also get all the other channels.

Indoor Antenna

Check your antenna to make sure it's a UHF/VHF antenna. You may need an indoor antenna that has rabbit ears -- that is the best way to get KMSP/FOX 9 reception on your TV. Your antenna should have a power boost to amplify the VHF signal if you are having trouble getting FOX 9 or KARE 11.

What Antenna Is Right For You?

Need help locating the proper outdoor antenna to receive your local television broadcast channels? Based on geographical maps and signal strengths, locates the best antenna for you, whether it's a home satellite system, high-definition television (HDTV) or a traditional analog set.

Make sure you antenna is pointed toward Shoreview, where FOX 9 transmits from.

CALL FOX 9 FOR HELP: 952-944-9999

Apr 07, 2010 | Standard (CRT) Televisions

1 Answer

Digital channels

It's possible the stations you have in your area

have switched from UHF to VHF or vise-versa

I had the same problem and have lost one channel completely

You didn't clarify if your using an antenna or

cable qam so I assumed you are using antenna.

Youll need to check your antenna to see if it

supports both UHF vhf if it only supports one

that could be your problem .

go to it will help you determine

what stations are avalible to you .

Jun 13, 2009 | Sanyo DS27510 27" TV

1 Answer


There's a setting in the TV to be able to switch between VHF and UHF. VHF is limited to channels 18 and below (if I remember correctly). Look for a switch or setting on the TV to change it to UHF. Could be a setting in TV menu or a physical switch on the TV.

Apr 06, 2009 | Standard (CRT) Televisions

1 Answer

No uhf with antannae

UHF channels are basically "line of sight" type signals. You need to be pretty near those UHF stations.
You need a Uhf or combination Uhf/ Vhf antenna to receive them - - Usually an out-door type.
Your TV needs to be set in the "antenna" mode to tune beyond channel 13 "air type" channels. Channel 14 is the first UHF channel if you're in the antenna mode. If you're in the "Cable" mode then channel 14 is a cable channel which is operating at a different frequency from UHF.
I hope this will help you!

Mar 21, 2008 | Orion STV2763 27" TV

2 Answers

No cable

try going into the menu of the tv and changing the tuner type from ANT to Cable

Jan 28, 2008 | Sony FD Trinitron WEGA KV-20FS120 20" TV

1 Answer

Reception of vhf/uhf channels

You did not mention which set you have, so look for a small switch (usually on the back of the set) or go into the menu and set the TV to the "broadcast" or "tv" mode. If the set is in the "cable" mode, you will not get any UHF channels above 13.

Sep 01, 2007 | Standard (CRT) Televisions

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66476 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides