Belkin wireless router reset password problems

well you can fix such kind of problems via contacting to belkin tech support. for more help you may visit: Belkin Tech Support Helpline

Just hook it all up, and push and hold the reset button in the back of the router for 10 sec..

Then unplug your internet box, [cable/DSL box] and plug back in,
The internet box will send a IP to your router automaticly.

[If it dont work unplug power from both boxes, then back in but plug the internet box in first..]

done..

if your useing wireless this will not be setup with a password to join, and will be open to neighbors,,

If you want to go to the next step and setup a password to join, you can do this with out the cd also, but get it working first and hit me back

You need to find out what settings need to be changed in the router to communicate to the new modem. Etisalat should have some type of instructions on how to configure it...Does the IP address get obtained automatically or is it manually configured. Does the modem require authentication..like a password. Did they replace the modem or just upgrade the system? You may just ahve to reset the modem and router to get reconnection. Most routers use the IP address of 192.168.0.1 or 192.168.1.1 to get to the router settings control panel. Just enter one of these addresses on internet explorer and a screen should ask for a password. The default password is usually ADMIN but consult the routers manual for instructions. Once you are in the router control manual you can configure the router to work with the new system.

I had this with Bt Internet and this exact same router, you have to phone Belkin up and they give you a complete set of new settings that you manually have to put in during setup. If i remember rightly its a free phone number and the operator who answered spoke semi-english so not all bad, hope this helps.

Chris E

solution 1:Reset the new password for accessing for internet.

solution 2:check with adapter.plug out and plug in the adapter(and also antenna too )

I have a Mac Pro and a Belkin F5D 7230-4 Router. The Mac links to the WiFi but will not go on to the internet. The Router works fine with a wired PC and other wireless PCs. I have updated the Belkin with the latest Firmware but it does not help. I have tried powering down the Router and Modem

Gmac

Well you can try to contact to belkin tech support and ask for online assitance hope they will fix your problem and you will be good to go.

the red light means u havent got a connection if u have installed properly try upgrading the firmware the problem might be the routers
http://www.belkin.com/support/product/?lid=en&pid=F5D9230-4&scid=221