Question about Kenwood KDC-MP435U CD Player

2 Answers

Face inop lights work no display - Kenwood KDC-MP435U CD Player

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 720 Answers

If you can operate the unit from the faceplate and change stations when pressing the station preset buttons, then the faceplate is OK.
The problem lies with the internal display resistors.
Check out my tutorial which will explain further:

http://www.fixya.com/support/r16293427-repair_no_display_kenwood_faceplate



Cheers,
Scott

Posted on Feb 01, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 273 Answers

Check the wiring harness most new headunits have a wire for ignition but not many cars have it by joining this wire to the live should sort the problem

Posted on Aug 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instruments not working on benelli trek


sounds like one of your display fusers gone or a loose connection

May 15, 2012 | Benelli Tre-K 1130 Motorcycles

1 Answer

My JVC car stereo display " Protect " on display


FIRST PRESS THE RESET BUTTON BEHIND THE FACE IF DONT WORK CHECK ALL SPEAKER WIRES SOMETHING MIGHT BE TOUCHING

Jul 24, 2011 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

Need a code to unlock my radio for a 97 grand prix


Follow these steps to unlock your GM Delco Radio:
1. Turn the ignition ON (The Delco radio displays "LOC" or "INOP").

A. If your radio says "INOP" then you have entered too many wrong codes. You will need to run the vehicle for one hour or turn the key into the ON position for one hour before you can proceed to Step 2.

2. Looking at the face of your GM Delco radio, hold down the preset buttons 1&4 or 2&3 for approximately 10 seconds. The radio display changes from "LOC" to a three-digit number. Write this number down.

3. Press the AM/FM button. The radio display changes to another three-digit number. Write this number to the right of the first one.

4. You now have a six-digit number, the first three digits are from STEP 2 and the last three digits are from STEP 3, you will have a number like this (612-622).

A. NOTE: Saturn and GEO vehicles will only display a four-digit number. The fourth digit will be displayed half the size of the first three digits. Example: 2193.

Hope helps (remember rated and comment this).

Sep 02, 2010 | Pontiac Grand Prix Cars & Trucks

1 Answer

Cobra 29LTD speaker inop....No audio at all. Speaker Ohms out ok as do speaker leads from board to speaker. External speaker jack is inop. PA works in PA and CB modes. Other than speaker issues, radio...


There are some different things you could be facing like:
the speaker sound being cut-out by the mic switch, but my first guess is the switch in the external spkr. jack being faulty. Here is a schematic for you.

http://xbones_antennas.tripod.com/id21.html

Apr 12, 2010 | Cobra 29 LTD CB Radio

1 Answer

Ac ligths not working


if the AC display lights are inop then pull the AC control out of the dash, pull the top cover off the control head and inside behind the display u will find a small twist in bulb socket, twist the socket out and replace the tiny backligfht bulb.

Sep 17, 2009 | 2002 Dodge Grand Caravan

1 Answer

All arrows flash and time display inop.


Sounds like a bad set or you have the set plugged into an analog line.
To ensure this is a digital line which the phone needs, grab another set and bring it to your desk or where this phone is having issues, and plug this working set in and see if it does the same thing.

Aug 04, 2009 | NorStar T7208 Corded Phone

1 Answer

Volumn inop,remote inop


sounds like the vol down button has stuck try agitating it ..good luck farr64

Apr 29, 2009 | Symphonic ST420FF 20" TV

1 Answer

Lcd light inop


there is a post on mazda6club.com on how to do this

Apr 06, 2009 | 2003 Mazda Mazda6

Not finding what you are looking for?
Kenwood KDC-MP435U CD Player Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Marvin
Marvin

Level 3 Expert

84949 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...