Question about Konica Minolta bizhub C250 All-In-One Laser Printer

2 Answers

Trying to use photo copierfrom the touch pad

The all-in-one is the c252/252p
when you try to use photo copier from the touch pad it fails and informs you that "job done improperly"
has anyone got any idea how to sort this out
thanks in advance

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 167 Answers

Job done improperly is usually an error code associated with scanning/storing.

Posted on Jan 08, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer got voted for 20 times.

  • Expert
  • 214 Answers

Eee, what version machine you have ?
C252 is copier
C252p is a printer version without copy function

what are you trying to to? copy ? scan ? print ? fax ?

Posted on Dec 31, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replacing waste ink pads on epson rx685

Actually it will very hard for you to access the ink pads for it was designed to be only touched by their service center. I would pressume your printer is giving you errors on waste ink pads full? Try this to reset the counter and be able to use your printer again..

Sep 25, 2012 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

None of the keys work

the touch pad has a ribbon cable that connects to the control board poosible that the touch pad has failed or the control board itself.... most of the time the touch pad fixxes the problem... if you have power and all still try ordering the touch pad for the unit...
good luck to you

Jan 09, 2011 | Microwave Ovens

2 Answers

The touchpad (and buttons) stopped working. No response at all. External mouse works fine, so it is not a software issue. Could this be a loose connection? or do these fail after a while? Are the...

Is there a button with a light on it near your touch pad, sometimes these buttons don't have lights? Usually this button is centered on the bottom or top of the touch pad. If there is a button like this, then try pressing it to see if it gives you functionality of the touch pad. If you do have a button like this and it doesn't resolve the problem then there is a possibility that the touch pad has malfunctioned or that the connector has come loose somehow. If you don't have this type of button then look at your keyboard to see if there is a function key for turning off\on the touch pad. Look for the FN key. What color is it? Then look at the keys that have icons in that color. If you find one that you believe is for the keyboard then try pressing that key and the FN key at the same time.

Jun 25, 2010 | Toshiba Satellite M55-S325 Notebook

1 Answer

My touch pad does nothing

start in safe mode and see if it works, if not, try to uninstall and re-install the mouse drivers ( could be a conflict) if driver re-installation fails, do system restore to a date when the touch was ok( you could have been hit by a virus). if still no luck, check touch pad hardware> means you have to open unit. check the touch pad to motherboard interface( could be loose).

Feb 24, 2010 | Gateway Computers & Internet

1 Answer

I have an epson stylus photo R200. It has stopped working and has alternate red flashing lights. Error message says serviceable parts are nearing end of life. How do I get it to carry on working?

I'm not sure about the servicable parts. You might want to contact Epson.

I have seen "parts are nearing the end of life" which applies to the ink pads that absorb excess ink. In that case, the printer needs to be replaced or serviced by Epson or an independent service provider. If you just get the ink pads serviced, it may still fail soon. Then you can run the resrt utility. For more information and the reset utility:

I hope this helps.

Cindy Wells

Dec 15, 2009 | Epson Stylus Photo R200 InkJet Printer

3 Answers

Its starts in safe mode,and the touch pad wont respond

the touch pad could have simply failed, most OS will interpret the mouse pad as a mouse to make it work, so if its gone its most likely not working, I mouse attached to a usb or one of the ps 2 connections might give you a mouse back temp you can replace most mouse pads.
hope this helps

Apr 07, 2009 | Acer Extensa 5420-5687 Notebook

1 Answer


When the touch pad stops working it's one of three things. 1- A driver glitch, unistall the touch pad drivers from the device manager, then reboot. The machine will find the touch pad and reinstall the drivers automatically. 2- The touch pad connector has worked loose. Take the palm rest with the touch pad off, disconnect the cable, clean the connectors, and reseat the cable firmly. 3- the touch pad has failed and will need to be replaced. The driver glitch is the most common, I believe that it should take care of the problem. Let me know.

Aug 06, 2008 | Dell Inspiron E1705 Notebook

1 Answer

Kenmore Elite drying doesn't work sometimes..

Touch pad is failing.Try not to get any moisture around this touch pad.Biggest mistake for all appliances is the touch pad and water dont mix well.

May 21, 2008 | Kenmore Dryers

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6573 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers


Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides